Page 1
PRIMEX
MDE Installation Instructions
PRODUCT
MODEL CODE
Verge MDE
P2100, P3000, P4200, P6300
The Primex Verge WiFi transparent Media Distribution Enclosures
for structured wiring bring reliability when managing today’s
inside cable system requirements. Its flexible design provides a
convenient, lockable and centralized location for easy installation
and distribution of multi-play services within residential and
commercial premises.
P3000 STANDARD FRAME & LID INSTALLATION
STEP 1
Install horizontal joist and gang box
To ensure a comfortable working height it is recommended that the
top of the gang box be installed 36” from the ground using a level.
Note: Leave at least a 2” buffer zone around base to keep clear from
perpendicular walls.
WARNING
• DO NOT stretch enclosure walls or lid won’t seat properly.
• DO NOT overtighten mounting screws.
• DO NOT use mounting screws larger than #8.
Note: Adhere to your local electrical code when installing all cabling.
STEP 2
Remove knock outs
Prior to installation, remove the knockouts for the conduit and
electrical box using a flush cutter tool.
STEP 3
Install base over top of the gang box using No. 8 flat
head screws
Install single screw in corner flange, level, then secure with
additional screws.
FOR MORE INFORMATION CONTACT:
T
1.604.881.7875
www.primex.com
F
1.604.881.7835
STEP 4
Connect power and install electrical outlet faceplate
At this stage, connect conduit for outgoing and incoming services and
secure with Primex conduit adapters.
1
3
2
4
Fit everything. Together.
452-3113
Page 2
PRIMEX
MDE Installation Instructions
PRODUCT
MODEL CODE
Verge MDE
P2100, P3000, P4200, P6300
STEP 5
Measure installation position
Measure distances from edges of enclosure to outside of adjacent
studs, floor and ceiling.
STEP 6
Measure, mark, cut and mount drywall
Use measurements from step 5 to mark out drywall. Cut out marked
area of drywall. Fit drywall over top of the installed enclosure base
and secure.
STEP 7
Paint and affix lid
Place paintshield, paint drywall, and install frame extender
(optional) and lid and frame sub-assembly.
STEP 8
Finish installation
Remove paintshield, install locks (optional), and install telecom
components (modem, ONT, UPS, eg.).
FOR MORE INFORMATION CONTACT:
T
1.604.881.7875
www.primex.com
452-3113
F
1.604.881.7835
Fit everything. Together.
Page 3
PRIMEX
MDE Accessory Installation Instructions
PRODUCT
MODEL CODE
Verge MDE
P2100, P3000, P4200, P6300
Rail Mounting System (RMS)
1
Determine placement of RMP and
press pushpins to lock in place.
3
Place component and press
bracket arm to hold securely.
2
Slide brackets into place from the
side of the mounting plate.
4
Recommended load 5lbs (2.27kg)
Place in heavier equipment first.
*Max mounted component
thickness of 3.3”
Universal Mounting System (UMS)
1
Pre-insert up to six pushpins into
UMP before placement.
3
Determine placement location of
component, cut tape, and thread.
2
Determine placement of UMP and
depress pushpins to lock in place.
4
Pull tape and affix to hold and
ensure component is secure.
*Recommended load
5lbs (2.27kg)
Shelf Mounting System (SMS)
1
Insert push pins to affix SMS to the
Media Distribution Enclosure.
3
Optional mounting tape to secure
hardware. (not included)
*All Installation Videos can be found on the Primex website.
2
Mount shelf into place and
secure.
4
Can be installed side by side and
act as a service divider.
P3000N Narrow Frame & Lid
1
Place enclosures between studs
side-by-side.
2
Install frame and lid using the
provided No.8 screws.
Verge MDE Frame Extender
1
Snap the frame
pieces together.
Align extender and
MDE frame.
(P/N: 125-1265)
32
Affix frame and
extender together.
FOR MORE INFORMATION CONTACT:
T
1.604.881.7875
www.primex.com
452-3113
F
1.604.881.7835
Fit everything. Together.
Page 4
PRIMEX
MDE Accessories
PRODUCT
MODEL CODE
Verge MDE
P2100, P3000, P4200, P6300
Product Description Stock Code
10” UMP w/5’ tape, pushpins (x10)
7” RMP w/RMB2(x2), pushpins (x10)
7” RMP w/RMB(x2), pushpins (x10)
7” RMP w/RMK(x2), pushpins (x10)
10” RMP w/RMB2(x4), pushpins (x10)
10” RMP w/RMB(x4), pushpins (x10)
10” RMP w/RMB2(x2)/RMK(x2), pushpins(x10)
Shelf Mounting System (Single-1/pk)
Shelf Mounting Sytem (Service divider-2/pk)
Shelf Mounting System (bulk-18/pk)
8-Port Cat5e Data Module
8-Port Cat6 Data Module
8-Port Voice RJ31x Module
6-Port Cat6a Data Module
8-Port Coax Splitter, 1GHz
8-Port Coax Splitter, 3GHz
Electrical Installation Kit
360° Electrical Rotating Outlet
3/4”-1/2” Reducer
1”-3/4” Reducer
Hinged Fiber Spool 3” ABS - Short Legs
Fiber Spool 3” ABS - Short Legs
Hinged Fiber Spool 3” ABS - Long Legs
Fiber Spool 3” ABS - Long Legs
White ABS Hurricane Clip (12/pk) 125-0239
White ABS 24” Stud Bracket 125-1272
Frame Extender, P2100 (20/box)
Frame Extender, P3000 (12/box)
Frame Extender, P4200 (12/box)
Fiber Splice Tray, 12 Fiber
Fiber Splice Tray, 24 Fiber
Universal Splice Tray
(fusion/mechanical/ribbon)
Quick Release Splice Mount
125-1623
125-1655
125-1656
125-1657
125-1658
125-1659
125-1660
125-1541
125-1542
125-1522
125-0986
125-1035
125-0987
125-0975
125-1046
125-1250
125-1355
125-1547
125-1022
125-0936
125-0932
125-0933
125-0931
125-0934
125-1532
125-1533
125-1534
125-1520
125-1521
125-1620
125-1668
Product Description Stock Code
FTC-White ABS w/Screw Cap
FTC-White ABS w/Single SC/APC Adapter
FTC-White, w/ext. Adapter Mount
FTO-w/2 SC/APC Adapter
FTO-w/1 SC/APC Adapter
FTO-w/Integrated Splice Tray
F-Connector 3GHz Keystone 125-0961
SC/APC Fiber Keystone w/Shutter 125-0908
Cat5e, 110 IDC, 90° HD
Cat5e, 110 IDC, 180° HD
Cat6, 110 IDC, 90° HD
Cat6, 110 IDC, 180° HD
3-Line RJ12 Voice Jack 125-0959-WT
Blank keystone 125-0960-WT
Surface Mount Box, 1-Port
Surface Mount Box, 2-Port
Customer Premise Outlet (CPO4), 4-Port 125-0911
Single-Gang Wall Plate, 1-Port
Single-Gang Wall Plate, 2-Port
Single-Gang Wall Plate, 3-Port
Single-Gang Wall Plate, 4-Port
Decorative Wall Jack, 1-Port
Decorative Wall Jack, 2-Port
Decorative Wall Jack, 3-Port
Decorative Wall Jack, 4-Port
Decorative Wall Plate
Oversize Wall Plate, 1-Port, Glossy
Oversize Wall Plate, 2-Port, Glossy
Oversize Wall Plate, 3-Port, Glossy
Oversize Wall Plate, 4-Port, Glossy
Oversize Wall Plate, 6-Port, Glossy
Oversize Wall Plate, 2-Port, W/Cat6 & Coax,
Glossy
Oversize Wall Plate, 2-Port, W/Cat6 & Coax,
Textured
125-0945
125-0873
125-0849
125-0885
125-0889
125-0879
125-0949-WT
125-0948-WT
125-0947-WT
125-0946-WT
125-0962-WT
125-0963-WT
125-0957-WT
125-0958-WT
125-0955-WT
125-0956-WT
125-0951-WT
125-0952-WT
125-0953-WT
125-0954-WT
125-0950-WT
125-1241-WT
125-1236-WT
125-1242-WT
125-1243-WT
125-1244-WT
125-1288-WT
125-1237-WT
FOR MORE INFORMATION CONTACT:
T
1.604.881.7875
F
1.604.881.7835
www.primex.com
452-3113
Fit everything. Together.
Loading...