Prime Design VRR-E-PM21 Assembly Instructions Manual

2

CONTENTS OVERVIEW

8

7

3

1

9

2

4

1—FBM-0020 ........................................................ (Qty 1)

Channels with Hardware

End Caps (4X) Screws (8X) Brackets (4X)

Top Connector (2X) Bottom Connector (2X)

6

5

10

60” Channels (4X)

M8 Bolt (4X)

Mountings (6X)

2—Rear Crossbar Assembly .................................. (Qty 1)

VRR-E-PM21 ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS

3—Front Crossbar Assembly ................................. (Qty 1)

PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: [phone] ▪ 1.8.PRIME.RACK ▪ Fax: [phone] ▪ Email:[e-mail] ▪ www.primedesign.net
TM & © 2015 PRIME DES IGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’ s 6092974, 6764268, 6971563, 236 4879, 8857689, 8511525, 8991889 AND OTHER PATENTS PENDING

4—Drive Shaft ........................................................ (Qty 1)

Rear, Right Hand, 34.00”

5—Connecting Bar ................................................. (Qty 2)

48.00”

6—Front Drive Shaft .............................................. (Qty 2)

B Version, 35.75”

7—Z Post ................................................................ (Qty 2)

Adjustable, 7.25”

8—L Post................................................................. (Qty 2)

US3, Square Cap, 11.25”

3

9—Drive Shaft ........................................................ (Qty 1)

Rear, Left Hand, 34.00”

10—HRR Removeable Handle Assembly ............. (Qty 1)

HKT-8162-Rotation Hardware Kit

CLP-1100-F (2X)

ASZ-0101 (2X)

CTP-1075-B (2X)

BLT-6850-M8 (8X) BLT-6822-H (4X)

VRR-E-PM21 ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS

LBL-0105 (16X)

LUB-0101 (2X)

PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: [phone] ▪ 1.8.PRIME.RACK ▪ Fax: [phone] ▪ Email:[e-mail] ▪ www.primedesign.net
TM & © 2015 PRIME DES IGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’ s 6092974, 6764268, 6971563, 236 4879, 8857689, 8511525, 8991889 AND OTHER PATENTS PENDING

4

FBM-0020

MOUNTING BRACKETS

INSTALLER NOTE: Mounting Brackets
must be disassembled for installation
onto the vehicle’s roof.

Front

Rear

Position Base Pullers and
Nut onto Roof Mounting Boss

1

Loosen nuts

Slide all Mounting Bodies
onto Base Puller Assembly

Rear

2

Slide Channels onto
Mounting Brackets

4.1

Front

VRR-E-PM21 ASSEMBLY INSTRUCTIONS–FBM MOUNTINGS

Torque to

80 in-lbs

PRIME DESIGN, A SAFE FLEET BRAND 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 ▪ Phone: [phone] ▪ 1.8.PRIME.RACK ▪ Fax: [phone] ▪ Email:[e-mail] ▪ www.primedesign.net
TM & © 2015 PRIME DES IGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’ s 6092974, 6764268, 6971563, 236 4879, 8857689, 8511525, 8991889 AND OTHER PATENTS PENDING

3.1

3.2

4.2

Slide the upper and lower
Channel Connectors into
Channels and align holes