What’s in the box:
v1
R7
1 Rocketsh RF-EX7 Bluetooth headset
1 charger
1 USB charging cable
1 Qu ick Setup G uide (what you’re looking at)
4 round earbuds
3 tted earbuds
1 ear loop
Heads et
Fitted earbuds
(medium size is pre-attached)
Charg er
Round earbuds
Ear l oop
LED light
Ear bud
Charging port
with cover
Send/end button
Volume
touch pad
On/O
(rever se side)
1 Power & Pair
1 Lift the charging port cover, then
connect the charger.
When, the indicator changes from red to
green, and you can disconnect the
charger.(See no.11 and no. 36)
LED light
2 Press and hold the power button for 3
seconds to turn on your headset. It will
automatically enter pairing mode when
you turn it on for the rst time. When in
pairing mode, the LED light will blink
Green.(on conrmation)
Bottom vi ew
What is PureSpeech®?
PureSpeech is a state -of-the-art noise cancelation and signal processing technology
created by SRS Labs and CSR. Your EX7 headset incorporates PureSpeech so that you
can hear your calls in amazing clarity, but also so you can be heard clearly by your
callers. PureSpeech is always activated on the EX7 so you will "Hear and Be Heard Like
Never Before."
3 Activate Bluetooth on your phone,
then set your phone to search for nearby
Bluetooth devices. For help with this step,
see your cell phone’s user guide.
4 When your phone detects the RF-EX7,
select it on the list, then enter “0000”
(zeros) for the PIN. The headset beeps and
the indicator turns green.
To turn o the headset, press and hold the
power button for about two seconds.
2 Get the perfect t
Use one of the tted earbuds for the most
convenient and comfortable t, or alternatively use
a round earbud in combination with the ear loop.
To use a rounded earbud:
1 Remove the tted
earbud that's already
attached, then press
the round earbud
onto the headset.
2 Attach the ear loop
for a secure t.
To use a tted earbud:
1 Attach the appropriate size
of tted earbud onto the
headset. The medium tted
earbud is already attached.
2 Inser t the headset vertically in
your ear (shown in step 2)
3 Rotate the headset up towards
your mouth. The exible
por tion of the ear bud should
t securely towards the back
of your outer ear.
You may need to guide it to a
comfortable position with
your nger.
3 To Call
To dial a number, make sure that your
headset is turned on, then dial the number
from your phone. Your headset will activate
as soon as the number is dialed.
To voice dial a number (not supported on
all phones), press send/end. A tone plays,
which is your signal to speak the command
or number.
To... Do this...
End a call Press send/end.
Answer a call Press send/end.
Redial a number Double-press send/end.
Reject a call
Switch a call
between the
headset and
the phone.
Double-press send/end.
Press and hold the
power button and
send/end for about
two seconds.
Mute a call Double-press send/end.
To... Do this...
Increase
the volume
Decrease
the volume
Swipe upward (toward the ear)
on the touch pad.You will hear a
dierent "beep" for each level
change in volume.
Swipe downward (away from
the ear) on the outside of the
headset.
4 Maintaining
LEDs
Green Power On
Green (fast ashing) Pairing State
Red (ashing) Low Battery
Know the facts
Recharge time: About two hours
Talk time: Up to eight hours
Standby time: Up to 300 hours
Phone pairing: Up to eight phones at the same time
To...
Enable or disable t he indicator
Check the battery level (method 1 )
Check the battery level (method 2 )
Erase paired device information
Multipoint pairing (pairing the
headset to multiple phon es)
Reset
Disco nnect from the phone (un-pair)
© 2010 Best Buy Enterprise Services, Inc. Distributed by Best Buy Purchasing, LLC • 7601 Penn Avenue South, Richfield, MN USA 55423-3645
Do this...
Press the power button and send/end together.
Turn the headset on, then press and release the power button.
Green = Between 1/2 and full charge
Green then red = Between 1 hour talk time remaining
and 1/2 charge
Red = Less than 1 hour talk time remaining.
Turn the headset on. If t he indicator ashes red and green,
or if it beeps ever y 300 seconds, the battery level is low.
Turn the headset o, then press and hold the power button
and send/end together for about two seconds.
Pair each phone with the headset. When you are in a call with one phone
but the other phone rings, press send/end to switch to the second call.
Connect the charger to reset the headset, then user can power on
headset after remove the charger.
Turn the headset o, then use the phone’s Bluetooth menu to
disconnect it. For help with this step, see your cell phone’s user guide.
FCC Part 15
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
FCC ID: EMJTRFEX7
“You are cautioned that changes or modications not
expressly approved by the part responsible for
compliance could void the
user’s authority to operate the equipment”.
Canada IC-RSS210 statement
IC: 4251A-HRFEX7
Operation is subject to the following two conditions:
(1) this device may not cause inter ference, and
(2) this device must accept any inter ference, including
interference that may cause undesired operation of
the device.
10-07 23
RF-EX7
EX7
WITH PURE SPEECH®
Hear and be heard like never before
RFEX7 QUICK SETUP GUIDE
Loading...