HP Comfort Grip Wireless
Mouse
User’s Guide
Model Rating
Mouse
Dongle
MORFG6UL 3V 40mA
DGRFEO 5V 80mA
Made in China
Package Contents
• 2.4G Wireless Dongle x 1
• AA Battery x 1 pc
• User’s Guide x 1
System Requirements
• Pentium processor or equivalent
• At least one USB port (USB 2.0 or 1.1)
• Operating System: Windows
Windows
2
®
Vista, Windows® 7
Introduction
®
XP with Servic e Pack 1 or hig her,
Feature
It is a wireless size mouse with Nordic new
technology 2.4G wireless optical mouse. The RF
distance is more than 10 meter.
It’s button uses magnetic face plate design for
battery change and dongle storage for an easier
operation.
It provides user to more choice to have different
color or pattern key as per personal preference as
an add-on value to users.
It uses the nano dongle can storage in mouse with
good portable for users.
It uses only one AA battery as less weight for more
portable and the battery life is more than 4 months.
It also provide a low battery indicator on top of the
mouse to warning user for battery change.
Regulatory Compliance
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
4
Canada Notice for Licence-Exempt Radio Apparatus
This device complies with RSS-210 of the Industry Canada Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable
aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux
conditions su iv a ntes:
1) le dispositif ne doit pas produire de brouillage préjudiciable, et
2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage
susceptible de provoquer un fonctionnement indésirable.
Loading...