Primax Electronics MMOBTEPUL User Manual

Pineapple BT Laser Mouse USER MANUAL Model: MOBTEPUL

Introduction

Congratulations on your purchase of the Bluetooth mouse.

Features

• Bluetooth® 2.0 interface (compliant with Bluetooth 1.0)

• Advanced tilt wheel for scrolling vertically and horizontally

• Avago™ laser sensor with resolution up to 1600 dpi

Pineapple BT Laser Mouse USER MANUAL Model: MOBTEPUL

Installing your mouse

Installing the batteries

To install the batteries:

1 Pry the battery cover open.

2 Insert two AAA batteries into the battery compartment.

Make sure that the + and – symbols on the batteries

match the + and – symbols in the battery compartment.

3 Replace the battery cover.

Installing your mouse

To install your mouse:

1 Turn on your computer and make sure that your Bluetooth device is set to search mode.

2 Slide your mouse’s power switch to the “ON” position. The switch is located on the bottom of your mouse.

3 Press and hold the pairing button on the bottom of your mouse until the LED indicator flashes blue.

4 Your computer automatically detects your mouse and installs the appropriate driver.

Using the mouse

Note: Avoid using your mouse on a reflective, transparent, metallic, or complex-patterned surface.

To use your mouse:

1 Press the left or right mouse button to perform standard left and right mouse clicks.

2 Move the scroll wheel to move the screen image up, down, left, or right.

Maintaining

To clean your mouse, wipe the surface and the optical sensor with a soft, lint-free cloth slightly moistened with water.

Troubleshooting

• Make sure that you have paired your mouse with your computer.

• Make sure that your operating system is compatible with your mouse.

• Make sure that the + and – symbols on the batteries match the + and – symbols in the battery

compartment.

• Make sure that you use your mouse on a clean, flat, non-slippery surface. Avoid reflective, transparent, metallic,

or complex-patterned surfaces.