Primax Electronics MMOBTC9L User Manual

ThinkPad Bluetooth Laser Mouse

User Manual

About this manual

Thank you for your purchase of this Bluetooth mouse set. This topics covered in this manual are

listed as following.

(This mouse will be sold without dongle.)

◆ Introduction

◆Installing and the Batteries

◆Installing and Uninstalling the WIDCOMM Bluetooth Stack

◆Setting up the Laser Mouse

◆Using the Laser Mouse

◆Using the WIDCOMM Bluetooth Stack

◆ Troubleshooting

1. Introduction

Features
Laser Mouse Features

• With scroll wheel and two buttons、tilt wheel

• Power saving mode

• LED indicator

a. Amber：Low battery

b. Flashing green: mouse is pairing

USB Bluetooth Dongle Features

• Bluetooth specification v1.2 and v2.0 compliant

• Supports mouse

• Supports additional Bluetooth devices

System Requirements

• Bluetooth / USB mouse supported computer

• Microsoft Windows 98/ME/2000/XP or later

2. Installing the Batteries

The mouse needs two AA size batteries. Follow the steps below to install the batteries.

1. Press the button and the battery cover pops out.

2. Install two "AA" batteries while observing the polarity (+ and -) indicated inside the mouse.

3. Replace the battery cover

3 Installing and Uninstalling the

WIDCOMM Bluetooth Stack

3.1 Installing the WIDCOMM Bluetooth Stack

Before installing the WIDCOMM Bluetooth stack, plug the USB Bluetooth dongle into a USB

port of your computer.

1. Insert the provided Installation CD in the CD ROM drive.

2. The installation stack loads automatically. If not, click the

Setup.exe in the bin folder of the CD ROM.

3. The welcome screen introduces you to the installation process. Click Next to continue.

4. Read the agreement and select “I accept he terms in the license agreement”. Click Next to

continue.