Page
1
of 10
User’s Quick Guide
This guide will take you through all the functions of the keyboard and explain how to configure them using the
keyboard.
Introduction
Congratulations on your purchase of the HP Ultra Thin Wireless Keyboard.
This keyboard is the latest in a wide range of computer peripherals manufactured by HP and is designed to
provide you with the highest level of comfort available while also allowing for maximum functionality.
The HP KBRF28711 Wireless keyboard is a simple yet innovative package that allows you to configure your
keyboard and keyboard to best meet your needs.
Safety Guidelines
Physical discomfort and injury can be caused by the incorrect use of your keyboard. Follow these guidelines
to ensure such problems are avoided:
Sit up straight in your chair, with your elbows by your side.
Adjust the height of your chair so your arm bends at a 90-degree angle respective
Position your keyboard in front you, to the side of your keyboard.
Do not slouch or hunch over your workspace. It is important to keep your wrists,
shoulders relaxed.
If necessary, use a wrist rest or a palm rest to alleviate extra stress placed on your
typing or using the keyboard, especially for long periods of time.
to your desk.
arms and
joints when
If you experience any feelings numbness, cramp, swelling or stiffness in your wrist, arms, neck or shoulders,
consult your local doctor or nearest health institution immediately.
Navigating HP Wireless Keyboard
The simple and straightforward interface makes it easy for you to customize each function of your keyboard.
Different settings are indicated by the tabs on the top of the screen. Click on the links to enter each
settings screen.
Page
2
of 10
Wireless keyboard instructions (Only some models are equipped with wireless keyboard)
Before using the wireless keyboard, carefully read the configuration instructions in the Quick Reference poster.
If you fail to connect the wireless keyboard according to the steps shown in the Quick Reference poster, you
may also connect using the instructions below.
Method 1:
1. After installing the batteries, turn on the power switches of the wireless keyboard.
2. Press the wireless connect buttons on the back of the keyboard.
When the keyboard wireless indicator lights blink white, turn the computer on immediately
Note: If the wireless indicator lights stop blinking, press the connect buttons on the keyboard again.
3. After entering the system, press the Bluetooth connect button on the base stand for over 10 seconds to
search for wireless devices.
Note: The process of searching for wireless devices could take several minutes.
4. When the wireless keyboard device is found, the driver will be installed automatically.
5. When the wireless keyboard device is found, enter the PIN code and press the Enter key to finish the
pairing process.
6. Once the wireless connection has been successfully established, the wireless keyboard will work properly.
Method 2:
Notes:
• Before using the method below, enter the system and prepare a set of wired keyboard.
• If you want to install a new set of wireless keyboard, follow the steps below.
1. Using the wired keyboard to enter the system.
2. Turn on the power switches of the wireless keyboard.
Page
3
of 10
3. Press the wireless connect buttons on the back of the keyboard.
When the keyboard wireless indicator lights blink white, turn the computer on immediately.
Note: If the wireless indicator lights stop blinking, press the connect buttons on the keyboard again.
4. To open the Devices and Printers dialog box, go to Windows and click Start → Control Panel →
Hardware and Sound. Press Add a device to pop-up a dialog box.
5. Select the HP Bluetooth Keyboard and click Next to establish the Bluetooth connection.
6. Select the HP Wireless keyboard and click Next. (Press Add a device icon if the dialog box is closed and
press the connect button again.)
7. Enter the pairing code and press the Enter key to complete the Bluetooth connection.
Changing Button Settings
You can configure each of the five keyboard buttons through the button settings screen.
The 'Select Button' list displays the list of buttons and their current function. The 'Select Task' list displays a
list of actions you can take to configure the button highlighted in the 'Select Button' list.
Move your keyboard over the 'Select Button' list and click each item to view more information.
Restore Defaults
Each setting screen has a Restore Defaults button. Click to restore all
settings to their original defaults.
The Middle Keyboard Button
By default, the keyboard wheel is set to operate as Middle Button when pressed.
Select the function you wish to assign to the middle button by checking the radio buttons in the Select Task
list.
Click to save all changes.
Move your keyboard over and click any of the Select Task list options for more detailed information.
Side Button 1
By default, the button is set to operate as Backward when pressed.
Select the function you wish to assign to the button by checking the radio buttons in the Select Task list.
Loading...