Thank you for choosing this 2.4G Wireless Keyboard and Mouse Kits. It operates with digital radio technology
to ensure no hinder communication between the keyboard, the mouse and your computer without connecting
cable.
The transmission and receiving of keyboard and mouse are free from angle restriction.
Preparing Keyboard, Mouse and Dongle
Before working with your new keyboard and mouse, look at the "Hardware Installation", and take a few
one-time preparations.
Hardware Installation
● Place the dongle at least 20 cm from other electrical devices (e.g. monitor) to achieve optimum
performance.
● The distance between the keyboard, mouse and dongle should not exceed 10 M.
● Do not place the dongle on metal surfaces.
● Do not move optical mouse on following surface
- Glass or any transparent materials
- Dark surface
- Mirror or reflecting surface
- Mouse pad with too many colors
- Rough surface.
Step 1: Connect the Dongle
● Plug the dongle connector into an USB port.
● SYSTEM will take around 10 sec to find your keyboard and mouse automatically.
Step 2: Inserting battery in mouse
● The mouse requires one alkaline AA battery.
● Remove the battery compartment cover on the bottom of the mouse
● First push the battery puller in then insert one AA battery into battery compartment.
● Close the battery compartment cover.
Step 3: Inserting batteries in keyboard
●The keyboard requires two alkaline batteries (AAA).
● Insert two AAA batteries.
● Close the battery compartment cover.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to
instructions.
Refer to "Important Battery Information" for disposal instructions.
Loading...