Instruction and Safety Manual
15’ Lockdown Deluxe
Two Man Ladder Stand
MODEL: PVLS-501
• Always Wear a Safety Harness with this Product
• Practice Using at Ground Level
• Weight Limit: 500 lbs.
• Tree Size: 9”-18” diameter
M
W
N
H
O
DD
J
E
K
T
L
S
G
J
I
D
F
P
BB
V
Q
A
B
U
W A R N I N G
Every year serious injury or death can occur from hunting related accidents. To ensure your safety, please completely read and follow this safety manual
and all warning labels before assembling, installing or utilizing this product.
Do not use this product before fully understanding all safety warnings and instructions. If you have questions, are unsure about any information or need additional
information concerning your product, contact our customer service department at 1-866-972-6168 or visit www.Primaltreestands.Com. Keep and
maintain this safety and instruction manual in a safe location for future reference.
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
SAFETY MUST BE YOUR FIRST PRIORITY WITH THIS PRODUCT
©2019 (rev. 1/19)
2019
Treestand Safety Warnings
Please read the following instruction manual and warnings labels completely before utilizing this product. Failure to understand and execute the
instructions and warnings may result in serious injury or death. In the event of an accident, have a plan for rescue, including the use of devices that may be
easily reached while suspended.
ALWAYS read and understand all warnings and instructions. Watch the enclosed DVD in it’s entirety before doing anything with this product including
assembly, installation etc. before each use of this product. Failure to read and understand all warnings and instructions and DVD material may result in
serious injury or death. Contact a Customer Service Representative with any questions you may have.
NEVER exceed total weight limit of 500 lbs. DO NOT use if your combined weight with all of your hunting gear and any accessories exceeds 500 lbs. Use
of tree stand over the weight limit may result in serious injury or death.
DO NOT use this tree stand while under the influence of alcohol, medication or any illegal substances. Use of tree stand while under the influence of any
of these substances may result in serious injury or death.
NEVER use this treestand during inclement weather. DO NOT use tree stand during thunderstorms, snowstorms, hurricanes, tornadoes or any other
weather conditions that include (but not limited to) lightning, icy conditions, or high winds that could create slippery or dangerous situations. End your hunt
and return to the ground if inclement weather conditions arise.
NEVER use treestand If you are feeling ill, nauseous, dizzy or if you have a prior condition that could cause a problem. i.e., heart condition, joints that
lock-up spinal fusions, etc., or if you are not well rested and alert. Physical ailments can reduce your ability to safely install, utilize, and remove your
treestand. Please consult a physician prior to use.
NEVER use this tree stand if you have a history of health problems such as (but not limited to) heart problems, back problems, high blood pressure,
impaired vision, equilibrium impairments, are afraid of heights, have been advised by a doctor or physician not to climb. If you are not physically fit, well
rested, and alert, or if you have any other physical or mental condition that would impair your ability to properly use this treestand.
NEVER use this tree stand on a tree that is dead, leaning, diseased, loose barked or on a utility pole as the tree may fall, break, or uproot and may result
in serious injury or death. NEVER rely on a branch for support.
NEVER jump or bounce on the treestand’s platform or ladder sections to seat it to the tree. Instead, step firmly on the first rung of the bottom ladder
section to set the ladder into the ground before proceeding to climb the ladder.
NEVER transport any of your equipment with yourself while ascending or descending the tree. You will need to have two hands free during ascending and
descending for safety. Use a haul line to pull up your firearm (unloaded, chamber opened with safety lock engaged, barrel facing towards the ground),
bows, arrows, knives or any other equipment to your tree stand once you have reached your desired hunting height. ONLY pull up hunting equipment after
the tree stand has been secured to the tree and after you and your harness have been secured to the tree. Prior to descending, lower your equipment on
the opposite side of the tree from which you are climbing. Make sure that the unloaded firearm’s safety lock is engaged and the gun barrel is pointing
towards the ground.
ALWAYS hunt with a plan and a buddy. Before you leave home, let others know your exact location, when you plan to return and who is with you.
ALWAYS carry emergency signal devices such as a cell phone, walkie-talkie, whistle, signal flare, PLD (personal location device) and flashlight with you at
all times and within reach even while you are suspended in your harness. Watch for changing weather conditions. In the event of an accident, remain calm
and seek help immediately.
ALWAYS inspect the tree stand and the Fall Arrest System (FAS) (Harness) for signs of wear or damage BEFORE each use. Also inspect to ensure that
nuts and bolts are secure. Pay special attention to the harness and straps, guaranteeing that nothing has been frayed or severed. Destroy all products that
cannot be repaired by the manufacturer. Contact a Customer Service Representative for replacement parts. The Fall Arrest System MUST be discarded
and replaced after a fall has occurred.
DO NOT ATTACH YOUR FULL BODY HARNESS TO YOUR TREESTAND.
NEVER modify your treestand in any way by making repairs, replacing parts, or altering adding or attaching anything to it except if explicitly authorized in
writing by the manufacturer. Improper installation or adjustment may cause serious injury or death. Remove all contents from box. Inspect for any
damaged or missing parts. If any parts are missing or damaged, you must only use certified replacement parts. Using any other replacement parts will
void product warranty. THERE ARE NO EXTRA PARTS. All parts MUST be used to ensure the safety of you and your stand. If you think parts are missing
or damaged, STOP IMMEDIATELY and contact our Customer Service Department. Using the tree stand with missing or damaged parts may result in
serious injury or death. DO NOT return this product to the retailer. Contact a Customer Service Representative if you have any missing, damaged or extra
parts.
ALWAYS keep instructions (written and video) in a safe place and review before each use. It is the responsibility of the treestand owner to furnish the
complete instructions to anyone who borrows or purchases the treestand from you. A safe treestand hunting video has been included. View it in it’s entirety
prior to using this product.
NEVER use this treestand for any use other than hunting. Our treestands are designed for hunters to wear a Full Body Harness. If you are not completely
comfortable and confident with your ability to safely install, ascend, hunt and descend using a Full Body Safety Harness and this treestand, DO NOT
PROCEED.
use this treestand for trimming trees.
NEVER
NEVER fall asleep in your stand as you may fall out resulting in serious injury or death.
ALWAYS be sure to re-tighten all bolts BEFORE each new use of treestand.
ALWAYS have a minimum of three people present when installing or removing this treestand.
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Customer Service Department 1-866-972-6168
©2019 (rev. 1/19)
2019
i
.
w
w
w
l
r
p
m
s
e
e
t
r
a
.
t
a
s
c
n
d
o
m
Treestand Safety Warnings
NEVER adjust your stand while in use. Practice the attachment of this treestand at ground level before using in a hunting environment. ALWAYS ensure
that you and your treestand are safely secured to a healthy tree. Your tree stand MUST be attached tightly to the tree and secured in place. If the stand is
not secure, it may shift while in use, resulting in serious injury or death.
The Installation Cross Straps and Truss Assembly System MUST be properly installed before each use of the treestand.
ALWAYS inspect every ladder section connection every time you use the stand before you leave the ground. If ladder sections are separating, with the help
of at least two other people, lower the stand to the ground, make adjustments, and reinstall.
ALWAYS check the ground below the tree stand to make sure it is firm and level. Sloping ground or uneven terrain (one side of a rock or root) can cause
your tree stand to tilt or shift.
ALWAYS maintain three points of contact when climbing the tree stand. (Two feet and one hand or one foot and two hands.)
ALWAYS lean forward as you climb and attach your harness to the tree before securing the platform to the tree and stepping onto the platform.
DO NOT leave your treestand outside since weather or animals may cause damage. Tree growth can also cause stress and damage straps and buckles. It
must be stored inside, free of moisture, when not in use.
NEVER wear jewelry or loose fitting clothing, which can cause hazardous conditions. Clothing may be caught in your equipment and cause you to fall. You
must always wear non-slip or rubber boots. Shoelaces must be tucked into your boots. Rings and necklaces MUST NOT be worn.
NEVER use this treestand with a second person. The treestand is designed for use by ONE person.
NEVER let children use this treestand without adult supervision. This treestand is not a toy. No one under the age of 18 should attempt to use this product
without direct adult supervision.
DO NOT use tree stand if any nuts or bolts or parts are loose, bent, or crooked.
ALWAYS know your physical limitations. Don’t take chances. If you start thinking about how high you are, don’t go any higher. Instead, choose a minimum
height that will allow for safe, effective and comfortable hunting.
ALWAYS lean forward towards the tree as you climb and attach your harness to the tree BEFORE securing the platform to the tree and stepping onto the
platform. NEVER lean out from the treestand for any reason.
ALWAYS wear a Fall Arrest System (FAS) (Harness) consisting of a full body safety harness after leaving the ground. A Full Body Harness that meets
TMA/ASTM standards MUST always be connected to yourself and the tree during ascending, hunting and descending. Single safety belts and chest
harnesses are no longer allowed and should NEVER be used. If you are not wearing a Full Body Harness properly attached to the tree, that is protecting
you from a fall, DO NOT leave the ground. Failure to wear your Full Body Harness may result in serious injury or death. Be aware that falls can occur at
anytime after leaving the ground.
ALWAYS read and understand the manufacturer’s Warnings, expiration date (if applicable) and instructions on how to use and how to properly adjust the
harness. Practice the use of a full body safety harness at ground level in the presence of a responsible adult to experience the feeling of hanging
suspended before using in a hunting environment. Failure to follow harness instructions may result in not being able to return to the stand and being
suspended in a harness after a fall, or serious injury or possibly death. If the hunting location is unknown by anyone and communication efforts are
unsuccessful, you MUST have a personal plan for rescue/escape because prolonged suspension in a harness may be fatal. It is important to exercise the
legs by pushing against the tree or doing other forms of continuous leg exercises to avoid blood pooling while being suspended. Hunters with varying
degrees of physical fitness may require different plans to recover/escape the effects of prolonged suspension. Have a personal plan and practice it in the
presence of a responsible adult before leaving the ground. No one escape/rescue plan will work for every hunter on every tree in every circumstance. Only
you can determine the best recovery/escape plan for your situation before leaving the ground.
ALWAYS have a suspension relief device on your person and readily accessible while using a harness. These devices allow the user to relieve the load on
the lower extremities if suspended in a harness and help maintain circulation in the legs, mitigate suspension trauma (blood pooling) or allow descent to the
ground. Several optional products/systems are available that offer self-recovery or self-extraction from a fall when suspended in a harness. Some systems
automatically descend the user while others allow user control. One of these products/systems can be considered for use as an additional safety precaution
against prolonged suspension and suspension trauma, Be sure to follow the manufacturers’ instructions on the safe use of these products/systems.
Hunt from the ground when self-recovery escape is absent. There is time to make a correct decision on what action to take if a fall occurs while wearing a
full body harness. It is important to remember “DO NOT PANIC.” Remain calm and implement your practiced rescue, relief and recovery plan.
NEVER allow the tether strap to get under your chin or around our neck. The length of the harness tether MUST be minimized at all times. It should be
adjusted so that it is above the head with no slack (snug) in the sitting position and you should have the minimum amount of slack possible when climbing.
NEVER remove any safety warning stickers
from this product.
Safety must be your first priority
during the use of this product.
W A R N I N G
DO NOT use this ladderstand without reading and following all
warnings and instructions before each use. Failure to do so
may result in serious injury or death.
ALWAYS inspect your ladderstand before each use. DO NOT
use if parts are missing, worn, or damaged.
ALWAYS wear a Full Body Harness while using this ladder
stand. Failure to wear a full body harness while using
this ladderstand may result in serious injury or death.
DO NOT exceed the ladderstand's 300 lbs. weight limit, which
includes your body weight as well as the weight of your clothes
and gear. Exceeding the ladderstand's weight limit may cause
the treestand to break or fail resulting in serious injury or death.
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
NEVER stand on treestand seat or armrests. Standing on any
of these parts may cause the treestand to break or fail resulting
in serious injury or death.
NEVER make any alterations or modifications to the ladder
stand. Doing so may result in serious injury or death and will
void all warranties.
NEVER use treestand in a tree that is dead, diseased, leaning,
or on wet or uneven ground as the tree may fall, break, or
uproot and may result in serious injury or death.
NEVER use ladderstand during inclement weather. DO NOT
use treestand during thunderstorms or any other weather
conditions including (but not limited to) lightning, freezing rain,
high wind that could create slippery or dangerous conditions.
Customer Service Department 1-866-972-6168
DO NOT use this ladderstand under the influence of alcohol,
drugs, or medication. Using ladderstand under the influence
of alcohol, drugs, or medication may result in serious injury or
death.
NEVER use ladderstand if you have dizzy spells, a heart
problem, are afraid of heights, have been advised by a doctor
or other health care provider not to climb, or have any
condition that would impair your ability to climb up or down or
use treestand as it could result in serious injury or death.
NEVER remove or deface ladderstand warning labels.
Replacement labels can be obtained from the address below.
.
p
w
w
w
©2019 (rev. 1/19)
2019
i
l
r
m
t
r
a
s
e
e
.
t
a
s
c
n
d
o
m
Choosing A Safe Tree
• ALWAYS thoroughly inspect the tree before installing your product. DO NOT install your TREE/LADDER STAND onto any dead or unsafe tree, telephone
or
utility pole, structural column, or man-made structure. Doing so may result in serious injury or death.
• ALWAYS select the proper tree for use with your TREE/LADDER STAND. Select a live straight tree that fits within size limits recommended (minimum tree
diameter must be no less than 9 inches and maximum of 18 inches.). DO NOT rely on a branch for support.
• DO NOT select a tree in the dark or choose a tree in close proximity to a fence. You must not have any stumps or rocks beneath your tree.
• NEVER use TREE/LADDER STAND on a tree that is dead, diseased , leaning or on wet and uneven ground as the tree may fall, break or uproot.
• Your tree must not be wet, icy or slippery or on wet, swampy, or loose ground that allows the tree to be unstable. Check the ground under TREE/LADDER
STAND to ensure it is firm and level.
• Be sure you have a level stand platform. Your tree must not lean or have any irregular shape.
• Tree must not have any loose or scaly bark or excessive vines, nails, screws, or any other sharp objects protruding that may sever webbing on product. Any
surrounding trees must not lean or have dead limbs that may fall onto you or your product.
• NEVER HURRY!! HURRYING CAUSES ACCIDENTS!! While climbing a TREE/LADDER STAND, make slow, even movements no more than ten to twelve
inches at a time. Make sure you have proper contact with tree and/or TREE/LADDER STAND every time you move. On ladder tree stand, ALWAYS
maintain three points of contact with each step up the ladder and ALWAYS lean forward as you climb.
Several treestands are equipped with a footrest, armrests and/or shooting rail. Neither the footrest, armrests nor the shooting rail have been
designed to support a user’s weight. Under NO circumstances should you place more than fifteen (15) pounds of weight on these structures. Doing
so will put the user in serious risk of injury or death.
Proper Care And Maintenance:
• Inspection for defects (damage, rot, corrosion, cracks, freezing, excessive heat, etc.) before every use is required. Do not use if damage is
detected or suspected.
• We recommend replacing all hardware/cables/nuts/bolts/clips on your tree stand every two (2) years or sooner if inspection finds it necessary. Use
only Primal Vantage approved replacement straps and parts. Use of any other straps or parts, will be viewed as a modification to the product. Any
modification will void the warranties and relieve Primal Vantage from all liabilities. Failure to follow these instructions may result in serious injury or
death.
• DO NOT overtighten the hardware. DO NOT use a socket wrench. This can lead to structural damage and may negatively affect the performance
of your stand. Failure to follow these instructions may result in serious injury or death.
• All photos are taken from the front view unless otherwise noted.
• In most cases, bolts come with two nylon washers. One washer will be placed against the bolt head the other washer will be placed against the nut.
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Customer Service Department 1-866-972-6168
©2019 (rev. 1/19)
2019
i
.
w
w
w
l
r
p
m
s
e
e
t
r
a
.
t
a
s
c
n
d
o
m
15’ Lockdown Deluxe
Two Man Ladder Stand
MODEL: PVLS-501
• Always Wear a Safety Harness with this Product
• Practice Using at Ground Level • Weight Limit:500 lbs.
• Tree Size: 9”-18” diameter
PARTS LIST
1 Top Ladder Section.................
A
1 Middle Ladder Section............
B
1 Bottom Ladder Section...........
C
1 Seat Platform..........................
D
1 Foot Platform..........................
E
2 Handle Rail..............................
F
1 Right Armrest............................Part # PRA-501
G
1 Left Armrest..........................
H
2 Ladder Yoke...........................
I
2 Upper Platform Support..........
J
2 Lower Platform Support..........
K
1 Shooting Rail...........................
L
2 Shooting Rail Extender...........
M
1 Backrest..................................
N
1 Tree Connection Brace...........
O
1 Step.........................................
P
1 Truss Bar................................
Q
1 Seat Cushion..........................
S
2 Rail Cover...............................
T
Part # PSL-5000
Part # PSL-5040
Part # PSL-5200s
Part # PSP-5001
Part # PFP-5002
Part # PHR-501
Part # PLA-501
Part # PLE-501
Part # PPS-501
Part # PPS-502
Part # PSR-501
Part # PSX-535
Part # PBR-501
Part # PTB-600
Part # PS-535
Part # PTB-100
Part # PSC-535
Part # PSC-500
Part # 20182 Harness...................................
HARDWARE BOX P/N 501H
4 M6 Quickclip...........................
U
2 Installation Strap.....................
V
1 Ratchet Strap..........................
W
1 Horizontal Jaw Assembly
Y
Strap.........................................
1 Truss Cable............................
Z
AA
2 Jaw Assembly Vertical Strap...
BB
1 Jaw Assembly Tree Buckle.....
CC
1 Jaw Assembly Ratchet Strap..
DD
1 Left Ladder Jaw ......................
EE
1 Right Ladder Jaw....................
2 M8x90mm Bolt w/3 washers...
90
8 M8x85mm Bolt......................
85
2 M8x75mm Bolt.....................
75
4 M8x55mm Bolt......................
55
1 M8x45mm Bolt........................
45
45
10 M6x45mm Bolt......................
46
2 M6x45mm Bolt......................
w/ 3 washers
30
6 M6x30mm Bolt.....................
2 M6x25mm Bolt.....................
25
Part # 1615
Part # ICS-1000
Part # RA-100
Part # PHJS-501
Part # PTC-501
Part # PJAVS-501
Part # PTB-501
Part # PRS-200
Part # PLLJ 501
Part # PRLJ 501
Part # 1291
Part # 1285
Part # 1275
Part # 1255
Part # 1245
Part # 1045
Part # 1045
Part # 1030
Part # 1025
Top Ladder
A
Section (1)
Handle Rails (2)
F
Lower Platform Support (2) 31”
K
Shooting Rail (1)
L
Backrest (1)
N
Q
Jaw Assembly
AA
Vertical Strap (1)
Truss Bar (1)
Middle Ladder
B
Section (1)
G-H
(Two Holes on each side)
Jaw Assembly
BB
Tree Buckle (1)
Bottom Ladder
C
Section (1)
Left and Right
Armrest (1)
Seat Cushion (1)
S
D
E
J
Shooting Rail Extender (2)
M
Tree Connection Brace (1)
O
Step (1)
P
Jaw Assembly
CC
Ratchet Strap (1)
Seat Platform (1)
Foot Platform (1)
Upper Platform Support (2) 23
Left Ladder Jaw (1)
DD
Right Ladder Jaw (1)
EE
1/4
”
I
Ladder
Yoke (2)
Rail Cover (2)
T
Tools Required
Adjustable Wrench
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
M6
U
Quickclip (4)
Installation
V
Straps (2)
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
W
Ratchet
Strap (1)
Truss Cable (1)
Horizontal Jaw Assembly
Y
Strap (1)
Z
WWW.PRIMALTREESTANDS.COM
Assembly Instructions Page 1
15’ Lockdown Deluxe Two Man Ladder Stand
Model: PVLS-501
ALL PHOTOS TAKEN FROM FRONT VIEW UNLESS OTHERWISE NOTED
Remove all contents from packaging and make sure all parts are present before attempting to assemble.
Tighten all bolt connections by hand first and then when fully assembled, go back and tighten with a wrench.
1
1
2
85
F
85
F
Attach Foot Platform E to lower portion of Handle Rails F using 4 - M8x85mm bolts .
Attach Seat Platform D to upper portion of Handle Rails F using 4 - M8x85mm bolts .
D
E
85
85
2
F
Attach Tree Connection Brace O to the top of each
Handle Rail F at the rear most hole using
2
2 - M8x55mm bolts . Do Not Tighten Bolts
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Customer Service Department 1-866-972-6168
55
O
55
F
©2019 (rev. 1/19)
2019
www.primaltreestands.com
Assembly Instructions Page 2
Model: PVLS-501
15’ Lockdown Deluxe Two Man Ladder Stand
3
Note: The Bracket on the Inside
H
45
Note: The Bracket on the Inside
G
45
D
Attach Left Armrest G to the outside of Seat Platform D using 2 - M6x45mm bolts .
Attach Right Armrest H to the outside of Seat Platform D using 2 - M6x45mm bolts .
3
NOTE: The Bracket on each Armrest MUST be on the INSIDE of the frame.
4
45
G
H
45
N
45
45
There are THREE holes on top of the Armrest. Attach Backrest N to
REARMOST holes of Armrests G and H using 2 - M6x45mm bolts on
each side.
4
DO NOT ATTACH TO THE FRONT HOLE. THIS HOLE IS WHERE THE
SHOOTING RAIL WILL ATTACH.
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Customer Service Department 1-866-972-6168
45
©2019 (rev. 1/19)
2019
www.primaltreestands.com
Assembly Instructions Page 3
5
L
Model: PVLS-501
15’ Lockdown Deluxe Two Man Ladder Stand
Washer
Nut
Washer
M
Left Side
Close up
Bolt Head
Washer
25
6
Insert each Shooting Rail Extender
M into Shooting Rail L and secure
with 1-M6x25mm bolt on each
5
side.
M
46
H
46
G
25
Shooting
Armrest
Rail
M
Attach Shooting Rail Extenders M to the front hole on each Armrest G and H
using 1-M6x45mm bolt w/3 washers on each side.
(See adjacent photo for proper installation order).
6
A washer will be placed against the bolt head, between the front vertical
support, the shooting rail, and the nut.
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Customer Service Department 1-866-972-6168
M
46
©2019 (rev. 1/19)
2019
www.primaltreestands.com
Assembly Instructions Page 4
Model: PVLS-501
15’ Lockdown Deluxe Two Man Ladder Stand
7
T
T
Attach Rail Covers T to Backrest N and Shooting Rail L .
Attach Seat Cushion S to Seat Platform D .
7
S
90 90
O
DD EE
Attach Left Ladder Jaw and Right Ladder Jaw
to the Tree Connection Brace
using 2-M8x90mm bolts with spacers
8
on each side.
Note: Spacers fit in between Ladder Jaw
and Tree Connection Brace.
DD
O
90
EE
98
F
30
Attach Step P to both Ladder Yoke I and
secure with 1-M8x75mm bolt on each
side.
9
Insert Ladder Yoke I into Handle Rails F
and secure with 1-M6x30mm bolt on
each side.
I
P
30
7575
75
30
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Customer Service Department 1-866-972-6168
©2019 (rev. 1/19)
2019
www.primaltreestands.com
Assembly Instructions Page 5
Model: PVLS-501
15’ Lockdown Deluxe Two Man Ladder Stand
10
55
Right Side
Bottom View
Seat Platform
F
J
85
K
F
K
J
85
Side View
10
55
R
Foot Platform
Attach the single holed end of Upper Platform Support J to the INSIDE of Handle Rail F
underneath Seat Platform using 1-M8x55mm Bolt .
Insert 2-M8x85mm Bolts through Upper Platform Support J and Handle Rail F .
DO NOT TIGHTEN NUTS.
Attach the double holed end of Lower Platform Support K to the Handle Rail F .
NOW TIGHTEN NUTS TO BOLTS.
Attach Lower Platform Support K to OUTSIDE of Ladder Yoke R using 1-M8x55mm
Bolt . Now tighten all 4-M8x85mm Bolts .
55
NOTE: The Upper Platform Supports will be between the Lower Platform Supports
and the Handle Rails.
Repeat for other side.
(See Bottom View of Right Side Handle Rail for Proper Order).
D
85
85
55
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Customer Service Department 1-866-972-6168
©2019 (rev. 1/19)
2019
www.primaltreestands.com
Assembly Instructions Page 6
Model: PVLS-501
15’ Lockdown Deluxe Two Man Ladder Stand
11
I
30
A
Slide Top Ladder Section A
into Yokes I and insert
1-M6x30mm Bolt in each
11
side to secure. Make sure the
sleeves are pointing towards
the ground.
12
13
U
A
B
Insert straight end of
Ladder Section B into
30
12
sleeved end of Ladder
Section A .
Insert 1 - M6 Quickclip U
through the hole on the sleeve
and through the ladder
13
sections on each side of the
ladder.
Close the quickclips to secure
the ladder sections together.
B
14
Rear View
W
V
EE
45
DD
O
W
V
The Stabilizer Sleeve
on Ladder section B and
the Truss Cable eyelet hole
W
on ladder Section C MUST
be facing towards the tree.
F
F
Y
W
W A R N I N G
VV
Attach Ratchet Straps to the outermost corners of the Tree Connection Brace . (See Ratchet Instructions)
Attach Installation Straps just behind the Ratchet Straps .
(See Installation Strap Instructions).
14
Connect the two right/left ends of the Horizontal Jaw Assembly Strap Y to the Jaws using 2-M8X45MM
bolts .
45
W
V
W
O
DD
MAKE SURE ALL BOLTS
ARE TIGHT BEFORE
PROCEEDING TO
INSTALLATION
EE
NOTE
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Customer Service Department 1-866-972-6168
©2019 (rev. 1/19)
2019
www.primaltreestands.com
Installation Strap Instructions
Model: PVLS-501
15’ Lockdown Deluxe Two Man Ladder Stand
1
Place looped end of strap
under platform.
1
Slot 2 Slot 1
2 3
Insert end of strap through the loop.
2
3
4 5
Pull to tighten. Continue with these
steps to install the other strap on
the other side of the platform.
6
Insert the strap through the Slot 2
with the teeth.
6
Place loose end of strap with clip,
under the top rung of the bottom
4
ladder section.
7 8
Pull strap to tighten.
7
Insert the strap through Slot 1 on
the clip.
5
Slide the buckles out to the sides
to create tension on the straps.
8
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
©2019 (rev. 1/19)
2019
WWW.PRIMALTREESTANDS.COM
Ratchet Strap Instructions
Model: PVLS-501
15’ Lockdown Deluxe Two Man Ladder Stand
1
Place looped end of Ratchet
under platform.
1
2 3
Insert Ratchet through loop.
2
4 5 6
Pull to tighten.
3
Place looped end of strap
under platform.
4
DETAILED RATCHET STRAP INSTRUCTIONS
1
Open ratchet handle
flat and insert end of
strap through opening
2 3 4 5 6
Pull Strap through
opening
through slot in ratchet
Insert strap through loop.
5
Insert end of strap
wheel
Ratchet handle back
and forth to tighten
strap
Pull to tighten.
6
After strap is tight,
close handle to
the locked position
To release tension, push
spring loaded retaining lock
and simultaneously pull
on strap
YOU MUST READ AND FOLLOW ALL
INSTRUCTIONS PRIOR TO INSTALLATION
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
©2019 (rev. 1/19)
2019
WWW.PRIMALTREESTANDS.COM
Truss Assembly Instructions
Model: PVLS-501
15’ Lockdown Deluxe Two Man Ladder Stand
1
Carefully lay fully assembled Ladder
Stand front ladder side down so that the
E
tree attachment side is facing upward.
Attach the hooked side of Truss Cable
without the tension adjuster to the
eyelet hole welded on the bottom front
1
of the foot platform assembly (as shown
left) .
E
NOTE: Top hook should ALWAYS face
inward, away from the front of ladder
(as shown left).
2
Attach the hooked side of Truss Cable with the tension
adjuster to the eyelet hole welded on the bottom rung of
Bottom Ladder Section .
NOTE: It may be necessary to pre-tension the cable by
tightening the tension adjuster several turns clockwise
before placing it on the Truss Bar .
2
Q
3
Q
45
Q
Stand in the middle of the ladder, pull up on the Truss Cable and place it onto the
Y-shaped end of the Truss Bar .Tighten the cable so that there is enough tension
to create a slight bow in the Ladder Structure (as shown above). Attach the Truss Bar
to middle rung of Middle Ladder Section using 1-M8x45 bolt .
3
NOTE: It should take minimal effort to lift the Truss Cable onto the Truss Bar, if
truss cable is not easy to lift, STOP immediately, loosen the truss adjuster and
repeat the process.
Q
B
Z
45
NOTE:
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Customer Service Department 1-866-972-6168
Drawings are for illustration purposes only and may not depict actual product.
©2019 (rev. 1/19)
2019
www.primaltreestands.com
Truss Configuration Instructions
15’ Lockdown Deluxe Two Man Ladder Stand
CORRECT
A
TRUSS IS TOO LOOSE TRUSS IS TOO TIGHT
B
C
Model: PVLS-501
INCORRECT
If ladder is perfectly straight or
bowed toward tree, TRUSS IS
TOO LOOSE. Take down the
ladder, tighten the turnbuckle
A
and re-set the stand until
correct.
This is correct. Note that there
is a slight outward arc to the
B
ladder.
INCORRECT
Do not over-torque truss system.
If ladder is bowed too far, it will
force users to climb at an
uncomfortable angle and could
also result in ladder failure. If
C
ladder appears to have an
extreme outward arc, take down
stand, loosen turnbuckle and
re-set the stand until correct.
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
NOTE:
Customer Service Department 1-866-972-6168
Drawings are for illustration purposes only and may not depict actual product.
©2019 (rev. 1/19)
2019
www.primaltreestands.com
Installation Instructions Page 1
Model: PVLS-501
15’ Lockdown Deluxe Two Man Ladder Stand
1
Position bottom of stand 4-5 feet from base of tree
NOTE: Make sure that Ladder Jaws and are
1
in their open most position.
DD
3 4
EE
2
One person will stand at the base of ladder with
his/her foot on the bottom rung while holding
installation straps. This will prevent tree stand from
sliding. Two people will stand at opposite ends of
2
tree stand, facing Platform and slowly walk tree
stand upward using rungs of ladder.
5
As tree stand is being raised, the
person holding Installation Straps will
pull toward themselves to take up slack.
It will steady and ease the weight of
3
stand on the other two people. Continue
walking stand upward, until Tree
Contact is resting against the tree.
90º
Move base of ladder toward or
away from the tree slightly in
order to make Platform as
Parallel to the ground as
possible.
4
Apply your full weight to the first
step so it settles into the ground.
90º
Cross Installation Straps behind tree.
Attach to the top rung of the bottom
ladder section. Pull to tighten the
straps against the tree.
5
(See Installation Strap Instructions).
DO NOT climb ladder without Truss Assembly or
Installation Straps installed. Serious injury or
death may occur if stabilizer bar is not installed.
NOTE:
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
Drawings are for illustration purposes only and may not depict actual product.
W A R N I N GW A R N I N G
Truss Assembly and Installation Straps MUST be secured
prior climbing the Ladder Stand. Failure to comply may
result in serious injury or death.
WWW.PRIMALTREESTANDS.COM
©2019 (rev. 1/19)
2019
Installation Instructions Page 2
Model: PVLS-501
15’ Lockdown Deluxe Two Man Ladder Stand
6
7
DD
AA
AA
AA
NOTE: The Ladder Jaws are designed to
wrap around a tree trunk when Vertical
Jaw Assembly Strap is tightened.
EE
Q
Before engaging the Ladder Jaw Mechanism:
1) Check that the Ladder stand is properly
installed oncorrect sized tree. If the ladder
jaws cannot closeon the tree trunk
(pictured top left), the tree is too large for
safe installation.
2) Check that the installation straps are
correctly wrapped around the tree base and
tightly secured
3) The Truss Mechanism is properly tensioned.
4) The ladder base is correctly and safely
secured onto level ground.
Check to make sure the Vertical Jaw
Assembly Strap is not caught, tangled
or snagged. Make sure the strap falls flat
and straight from the foot platform.
Carefully loop the Vertical Jaw Assembly
Strap through either the right or left metal
hooks on the Truss Bar (as shown left).
Lightly pull on Vertical Jaw Assembly strap
to and check to make sure that both
AA
ladder jaws close in on the tree trunk.
AA
AA
W
V
AA
A
V
Z
Q
Q
B
8
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
Loop Jaw Assembly Tree Buckle
through Jaw Assembly Ratchet Strap .
With the Jaw Assembly Ratchet Strap
attached, wrap the Jaw Assembly Tree
Buckle around tree trunk at a lower
diagonal point from the Truss Bar (as
shown right). Feed Jaw Assembly Tree
Buckle Webbing though the spring loaded
cam buckle and firmly tighten around tree
trunk.
Position Jaw Assembly Ratchet Strap
so that it faces the ladder. Feed Jaw
Assembly Vertical strap through ratchet
strap and ratchet the strap tight until the
tension closes the ladder jaws.
DO NOT overtighten. See Ratchet Strap
Instructions for correct operation.
Customer Service Department 1-866-972-6168
AA
AA
BB
BB
U
Q
Z
NOTE: Ladder should arc slightly
outward even after Jaw Assembly
Vertical Strap is fully tightened.
AA
©2019 (rev. 1/19)
2019
www.primaltreestands.com
Installation Instructions Page 3
MODEL: PVLS-316
Model: PVLS-501
SINGLE VANTAGE 17’ DELUXE LADDERSTAND
15’ Lockdown Deluxe Two Man Ladder Stand
9
10a
LADDER
STAND
TOP
W
9
10
After the ladder stand has been secured to the tree
with:
1) The installation straps secured.
2) The truss cable correctly tensioned
3) The Ladder Jaw system fully connected/engaged.
4) The Ladder securely attached to the tree.
Continue to have two people hold the ladder, climb
cautiously up to the platform. Once you reach the
top, IMMEDIATELY ATTACH YOUR SAFETY HARNESS
TO THE TREE. Keep the tether strap above your head.
Before sitting down, IMMEDIATELY locate Ratchet Strap at the
tree brace, behind the seat backrest. Wrap the strap around the
back of the tree once, thread through the ratchet and tighten (See side
view: 10a and cross-section:10b). (See Detailed Ratchet
Instructions Below for proper use).
W
10b
W
W A R N I N G
Installation Straps, Truss and Ladder Jaw Assembly MUST
be secured and engaged prior climbing the Ladder Stand.
Failure to comply may result in serious injury or death.
W A R N I N G
DETAILED RATCHET STRAP INSTRUCTIONS
1
Open ratchet handle
flat and insert end of
strap through opening
2 3 4 5 6
Pull Strap through
opening
DO NOT sit on the seat platform until the ratchet has been secured.
Insert end of strap
through slot in ratchet
wheel
Ratchet handle back
and forth to tighten
strap
After strap is tight,
close handle to
the locked position
To release tension, push
spring loaded retaining lock
and simultaneously pull
on strap
NOTE:
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
Drawings are for illustration purposes only and may not depict actual product.
©2019 (rev. 1/19)
2019
WWW.PRIMALTREESTANDS.COM
Failure to follow all warnings listed below could result in serious injury or death.
ALWAYS read and understand all warnings and instructions
before each use of this product. Failure to read and
understand all warnings and instructions may result in
serious injury or death.
ALWAYS inspect the tree stand for signs of wear or damage
BEFORE each use. Also inspect to ensure that nuts and
bolts are secure and straps are not frayed, worn, or broken.
DO NOT use treestand if combined weight of one person
and equipment exceeds 300 lbs. or combined weight of two
people and equipment exceed 500 lbs. DO NOT exceed
the weight limit of safety harness, refer to harness
manufacturers warnings for weight limit of safety
harness.
ALWAYS wear a Fall Arrest System (FAS) after leaving the
ground. If you are not wearing an FAS that meets ASTM
standards, DO NOT leave the ground. Failure to wear an
FAS may result in serious injury or death.
W A R N I N G
DO NOT use this tree stand while under the influence of
alcohol, medication, or illegal substances. Use of tree stand
while under the influence of any of these substances may
result in serious injury or death.
NEVER use this tree stand if you have a history of health problems
such as (but not limited to) heart problems, back problems,
impaired vision, equilibrium impairments are afraid of heights or
have been advised by a doctor not to do any strenuous activity. If
you are feeling ill, nauseous, or dizzy DO NOT use this tree stand
or If you are not physically fit, well rested and alert. Physical
ailments can reduce your ability to safely install, utilize and remove
your tree stand.
NEVER use this tree stand during inclement weather such as (but
not limited to) thunderstorms, snowstorms, hurricanes, icy
conditions, or high winds that could create slippery or dangerous
situations.
Manufactured in the year 2019 Primal Vantage Company Inc. 2407 W. Euclid Ave., Littleton, CO 80120 1-866-972-6168
NEVER use this tree stand on a dead, leaning, loose
barked tree or on a utility pole as the tree may fall, break,
or uproot and may result in serious injury or death.
NEVER leave the ground without checking every ladder
section connection to ensure they are firmly connected. If
ladder sections are separating, with the help of at least two
other people, remove the tree stand from the tree, tighten
all connections and reinstall on the tree.
Installation Straps, Ratchet Straps, Quickclips,
Tiedown Ropes and Stabilizer Bars MUST be installed
and secured prior to climbing tree stand. Failure to
comply may result in serious injury or death.
DO NOT modify or alter your tree stand.
NEVER remove or deface warning labels.
W A R N I N G
DO NOT climb ladder without Stabilizer Bar or Installation
Straps installed. This MUST be correctly installed prior to
use. Serious injury or death may occur if Stabilizer Bar
and Installation Straps are not properly installed.
Loading...