Cordless Cyclone Vacuum Cleanner
Instruction M anu al
PV-8100
01-04
01
13-17
12
05
06-11
Get
start...
Start...
More details...
Your Product
General Safety Information
General Product Information
Product Introduction
Operation
Maintenance
Product Maintenance
FAQs
01
“Tri-balls”Technology
contributes perfect
maneuverability
Your Product
Your Product
Power Head—extra motor can
provide strong suction to easy clean
short pile carpet and all articles in
narrow gaps
70 cm Aluminum tube,
easy roof reach cleaning
02
Start...
Your Product
Cylone Technology plus washable filter
quicker and easier cleaning
03
Start...
Your Product
Power Head
“Tri-balls” Technology contributes
perfect maneuverability
Air-Tunnel-Optimized technology
ensure deep cleaning performance
Extra motor can provide
strong suction to easy clean
short pile carpet and all
articles in narrow gaps
Dust-removing article to
improve the suction performance
Nylon bristle, easy clean the dirty
TPU furniture guard against
the destroy of your furniture
04
Start...
Your Product
Operation Led Light
--Easy understand the
machine status
Transparent dust tank
--easy to understand the
status and empty in time
Locking button
--Keep all parts in
good connecting
--One finger touch to clean
dust quickly
Powerful lithium battery
--provide strong performance
One finger touch button
--disassemble tank quickly
TPU soft handle
--More comfort for touching
Trigger switch
--save the energy
Exhaust filter cover
Release button
05
Start...
General Safety Information
General Safety Information
When using the vacuum cleaner, basic safety precautions should always be
observed, including the following:
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Only use the vacuum cleaner indoors on dry surfaces.
• Do not handle the plug or vacuum cleaner with wet hands. Do not use outdoors or
on wet surface.
• Do not use the vacuum cleaner with a damaged cord or plug.
• Do not pick up flammable or combustible materials (lighter fluid, petrol, kerosene
etc.) or use in the presence of explosive liquids or vapours. Do not pick up hot coals,
cigarette butts, matches or any hot, smoking or burning objects. Do not vacuum up
harmful or toxic material (chlorine, bleach, ammonia, drain cleaner etc.). Do not
vacuum up hard or sharp objects such as glass, nails, screws, etc.
•Do not put any objects into openings. Do not use with any openings blocked and do
not restrict airflow. Keep all openings free of dust, lint, hair or anything that might reduce
airflow. Do not use any part of the appliance to touch eyes, ears or put into mouth.
• Children should be supervised to ensure that they do not play with the appliance.
• Stop using if electric leakage or motor overheat, abnormal noise such as body
overheat, smelly, low suction, etc.
• Use the original adaptor to charge the battery. Do not use the original adaptor to
charge any other battery not belong to this vacuum cleaner. It may cause exploded,
human hurt or appliance damage.
• Store the vacuum cleaner in a cool, dry area.
• Always switch off and unplug the vacuum cleaner from the electrical outlet before
assembling, opening or emptying the dirt container, or before connecting/disconnecting
the attachments.
• If the inlet, tube is blocked, switch off the appliance and remove the blockages
before re-starting the vacuum cleaner.
06
Start...
General Product Information
Product Introduction
The packing contents
Crevice tool
Rotary combine brush
Small cleaning tool
Appliance brush
Main body
The dusting brush
Power head
Aluminum tube
Red power brush for mattressesCharger Parking base
* Due to our products need continuous improvement, the configuration as above will be different from each model,
we reserve the this right to explain
* Some products’ base have the charging function, them depend on specific product
We keep the changing right about the continuous improvement of f all technology
and design, and we reserve final interpretation.
General Product Information
Black power brush for floor
07
Start...
Aluminum tube installation instructions
Assembling the aluminum tube Disassembling the aluminum tube
Power head installation instructions
Assembling the power head Disassembling the power head
Using accessories
Except the aluminum tube and power head, you can choose our Crevice tool and
dusting brush to extend using range.
Crevice
Suit for the narrow and substandard surface, such as wall corner, window, appliances,
drawers, car cushion, frame, keyboard and so on.
Dusting brush
Suit for cleaning soft material, such as curtain, textile, sofa and so on
General Product Information
Start...
08
Combined usage of Crevice and dusting brush
Combine crevice and dusting brush As
bristle cleaning
Use crevice separately
Combine crevice and dusting brush as
Static belt cleaning
Parking base instruction:
when you finish cleaning, in order to future using, we advise you put the main body
and accessories to our specialized parking base.
Technical Specification
Item Technical Specification
Voltage 22.2V
Rating Power 150W
Battery volume 1500mAH
Dust capacity 0.35L
Noise Level ≤73dB
Charging Time 3-4Hours
General Product Information
09
Start...
Operation
Before using
• Please check your vacuum cleaner power status, if not enough, please charge in time.
(refer to “product charging”), you can use when it is fully charged.
• According to clean area, you can choose different accessories.
(refer to using accessories)
Starting using
Put your vacuum cleaner back the
parking station after using.
Press the red trap button as switch on,
release It when stop using.
General Product Information
* We keep the changing right about the continuous improvement of all technology
and design, and we reserve final interpretation.
* Concerning noise: this data is from our lab testing, which is executed by international
standard IEC 60704-1:1997,IEC 60704-2-1:2001.
Dimension 1200*230*220MM
Weight 2.7KG
MAX running Time
Successive:12-15min
Discontinuity:30min
10
Start...
Dust Empty
Switch off your vacuum cleaner and
pull dust release button to empty.
Close the dust tank after emptying
dust.
Battery Charging
Connect the charging pin with battery
and plug in.
Put the battery on the parking base which
has charging function and plug in.
General Product Information
11
More details...
•
•
•
Reminder:
Every 3 month after getting the product, please charge 3 hours (no need fully
charged) with specialized charger.
It is forbidden to put the battery on charger for long time. please stop charging
when it Charge overtime, in case of battery high heat , deformation or even burn.
When battery is not used for long time or be deeply discharged, the working
time will reduce, in order to get the best using effect, we advise you can use up
power (normally above 6 hours), and repeat this action for twice. It can renew.
Concerning indicator light
Working Charging Fully charged Lower power
Persistent green light Persistent green lightBlinking red light Blinking red light
General Product Information
12
More details...
13-17
More
details...
Maintenance
Product Maintenance
FAQs
13
More details...
Maintenance
Maintenance
Product Maintenance
To reduce the problem of daily using, periodic maintenance is needed.
• Always switch off and unplug the vacuu cleaner from the electrical outlet before
maintenance. (Figure 1)
• Clean the vacuum cleaner by water or Neutral detergent, the cloth should be dry
when clean the vacuum cleaner. (Figure 2)
• After finishing the cleaning, the unit should be placed on the position. Pay attention
to let the unit avoid the sunshine or damp place. (Figure 3)
Unit(handle part)
(Figure 1) (Figure 2) (Figure 3)
Dust bin & dust filtration frame
The structure of the vacuum cleaner is transparent, please pay attention to the dust
bin & dust filtration frame, and clean them periodically to avoid the normal using.
14
More details...
Maintenance
(Figure 4) (Figure 5) (Figure 6)
(Figure 7) (Figure 8) (Figure 9)
Dust bin maintenance
Once the dust reachs to the Max, pls clean the dust bin in time, over loading is not
allowed. Disassembling the tube or the accessory before cleaning the dust bin.
• After the vacuum cleaner switch off, press the button at the side of the dust bin to
remove the dirt(as the figure shows) (figure 4)
• If the dirty on the inner dust bin, press the dust bin inner button to remove the dust
bin, and use damp cloth to wipe the inner dust bin(figure 5)
• When cleaning is done, assemble the unit, and make sure to click into place when
secure.(figure 6)
Important:
If clean the inner dust tank by wet cloth and put back the tank only to be
sure it is totally dry.
• When the vacuum cleaner switch off, press the button of the inner dust bin
disassemble the dust bin(figure 7)
• Clean the filtration frame by clean cloth.(figure 8)
• When cleaning is done, assemble the unit, and make sure to click into place when
secure.(figure 9)
Dust tank filtration frame maintenance
Important:
Do not clean the dust bin filtration frame By water directly to
protect motor & PCB
15
More details...
•
•
Maintenance
(Figure 10) (Figure 11)
(Figure 12) (Figure 13)
Exhaust Filter Maintenance
To make sure the normal using, periodically cleaning is required. 3-6 months changing
the HEPA is needed.
• Press the release button, pull the filter, remove the dirt on it. (figure 10)
• Clean the filter by water if the dirt is too much. Assemble the unit again after dry.
(figure 11)
Important:
to use the cold water when clean the filter, and assemble the
It to the unit when it is totally dry.
Battery replacement
• Switch off, press the bottom button, pull the battery (figure 12)
• Assemble the new battery as the same direction of the arrow which will click into
place when secure. (figure 13)
Important:
Keep the battery in cool, dry place when long time not using, keep half power.
Keep away from metal parts to avoid energy loss.
16
More details...
Maintenance
(Figure 14) (Figure 15)
(Figure 16) (Figure 17)
Power head maintenance
To clean the power brush after 4-5 times usage of the power brush
• To pull the agitator out as the direction of the arrow. (figure 14)
• Remove the hair or the dirt by the gifted tool. (figure 15)
• Wipe the agitator by the dry cloth. (figure 16)
• Assemble the agitator after cleaning. (figure 17)
17
More details...
Maintenance
FAQs
usual problems
possibility
solution
the vacuum cleaner
does not work
The battery is power off Charge the vacuum cleaner
before using
suction is blogged clean the suction socket
Suction is weak Clean the dust bin, filter etc Clean the dust bin and the
exhaust filter
Agitator is rolled by the hair or
somthing
Clean the agitator
Debugging the above situation,
the vacuum still cannot work
normally
contact our after service
Abnormal sound of
the motor
Suction tube or the aluminum
tube is blogged
Clean the suction tube or the
aluminum tube
Debugging the above situation,
the vacuum still cannot work
normally
contact our after service
Working difficulty of
the vacuum cleaner
Many Obstacles in the cleaning
area
Remove the obstacles
Suction tube is blogged Clean the suction tube
Debugging the above situation,
the vacuum still cannot work
normally
Contact our after service
Cannot charge Main unit did not match the
electrical connector
Check and match correctly
The battery place in the wrong
way
Check and place correctly
Debugging the above situation,
the vacuum still cannot work
normal
Contact our after service
* We keep the changing right about the continuous improvement of all technology and design,
and we reserve final interpretation.
Pro Logic International Limited
Tel: (852) 2365 0655
FAX: (852) 2365 0235
Email: info@iplushome.com
Website: www.primada.com.hk
Loading...