Primacoustic Push-on IMPALER Data Sheet

ENGINEERING DATA SHEET

PusH-On iMPAleR

Push-on Impalers™ are designed to provide the installer with a simple,
quick and effective method of mounting Broadway™ glass wool panels
onto walls without causing serious surface defacement. Primacoustic

Push-On Impalers allow the installer to push the Broadway panel straight

onto the Impaler clip, making it easier to align panels in clusters or side by
side with accuracy.

The Push-On Impaler features a series of sharp protruding darts that

penetrate the panel and secure it in place. To ensure panels do not get
dislodged after installation, applying a dab of construction adhesive to the
center of the Impaler during the mounting process adds a level of security
and reduces opportunity for tampering. Impalers are installed using typical
sheetrock anchors and screws.

suRFAce iMPAleR

Surface Impalers™ are designed to provide the installer with a simple,
quick, and effective method of mounting Broadway™ glass wool panels
onto walls without causing serious surface defacement. Primacoustic
Surface Impalers allow the installer to simply pull the panel down onto

the Impaler clip quickly and efciently, while allowing for some levelling

adjustability after the panel is installed.

The Surface Impaler features four sharp darts that penetrate the panel and
secure it in place. To ensure panels do not get dislodged after installation,
applying a dab of construction adhesive to the center of the Impaler during
the mounting process adds a level of security and reduces opportunity
for tampering. Impalers are installed using typical sheetrock anchors and
screws.

Push-On Impaler:

Surface Impaler:

3” (77mm)

4” (102mm)

3” (77mm)

4” (102mm)

SPECIFICATIONS:

ORDER NUMBER Push-On: F101-1003-00 Surface: F101-1000-00

MATERIAL 20 gauge galvanized steel

DIMENSIONS 3” (76mm) x 4” (102mm)

ATTACHMENT POINTS 2 (Use appropriate fastener for wall surface)

MAX LOAD LIMIT 12 lbs. (5.4 kg.) Dependant on wall fastener

NUMBER PER BOX 24 per box

RECOMMENDED MINIMUM NUMBER OF IMPALERS PER PANEL:*

Order No. Description HEIGHT WIDTH DEPTH

F121-1212-xx Scatter Blocks 12” (305mm) 12” (305mm) 1” (25mm) 1

F102-2424-xx Control Cubes 24” (610mm) 24” (610mm) 2” (51mm) 2

F122-2424-xx Control Cubes 24” (610mm) 24” (610mm) 2” (51mm) 2

F121-1248-xx Control Columns 12” (305mm) 48” (1219mm) 1” (25mm) 2

F122-1248-xx Control Columns 12” (305mm) 48” (1219mm) 2” (51mm) 2

F123-1248-xx Control Columns 12” (305mm) 48” (1219mm) 3” (76mm) 2

F121-2448-xx Broadband Panels 24” (610mm) 48” (1219mm) 1” (25mm) 4

F102-2448-xx Broadband Panels 24” (610mm) 48” (1219mm) 2” (51mm) 4

F122-2448-xx Broadband Panels 24” (610mm) 48” (1219mm) 2” (51mm) 4

F103-2448-xx Broadband Panels 24” (610mm) 48” (1219mm) 3” (76mm) 5

F123-2448-xx Broadband Panels 24” (610mm) 48” (1219mm) 3” (76mm) 5

F103-2448-xx Broadband Panels 24” (610mm) 48” (1219mm) 3” (76mm) 5

F123-2448-xx Broadband Panels 24” (610mm) 48” (1219mm) 3” (76mm) 5

*Primacoustic recommends a certain number of impalers per panel as the minimum required for
safe installation based on panel depth and weight. For additional security, you may wish to increase
these numbers per panel and also combine with construction adhesive.

No. of
Impalers
Needed*

4” (102mm)

4” (102mm)

Flush mount impaler
clips should be located
approximately 4 inches
(102mm) or more from
the panel edges.

12” x 12” 24” x 24” 12” x 48” 24” x 48”

Primacoustic is a division of Radial Engineering Ltd. • 1588 Kebet Way Port Coquitlam, BC V3C 5M5 • Tel: [phone] Fax: [phone]

www.primacoustic.com • [e-mail] • Primacoustic Engineering Data Sheet • Part #R870 2200 00 • Copyright © 2016 • Subject to change without notice.

ENGINEERING DATA SHEET

cORneR iMPAleR

Corner Impalers™ are designed to provide the installer with a simple,
quick and effective method of mounting Broadway™ glass wool acoustic
panels into corners to create bass traps. The Corner Impaler features a
45º angle design that positions a panel across a typical 90° corner without
causing serious defacement of the wall surface.

The panel is held in place using a series of sharp protruding darts that
penetrate the panel to secure it during installation. To ensure panels do
not get dislodged after installation, a dab of construction adhesive may be
applied to the impaler darts during the mounting process adding a higher
level of security and reducing opportunity for tampering. Impalers are
installed using typical sheetrock anchors and screws.

OFFset iMPAleR

Offset Impalers™ provide the installer with a simple, quick and effective

method of mounting Broadway™ glass wool acoustic panels onto wall
surfaces while creating an air cavity behind the panel to increase bass
absorption.

The Offset Impaler features a U-shaped design that holds the panel from

the wall surface by 3.5” making it easy to align with typical 2” x 4” studs.
The panel is held in place using a series of sharp protruding darts that
penetrate the panel to secure it during installation.

5” (126mm)

3.5” (89mm)

5” (127mm)

3” (77mm)

3” (77mm)

3”

(77mm)

To ensure panels do not get dislodged after installation, applying a dab of
construction adhesive to the impaler darts during the mounting process
adds a level of security and reduces opportunity for tampering. Impalers
are installed using typical sheetrock anchors and screws and therefore,
will not cause serious surface defacement to the wall.

SPECIFICATIONS:

ORDER NUMBER Corner: F101-1001-00 Offset: F101-1002-00

MATERIAL 20 gauge galvanized steel

DIMENSIONS

3” (76mm) x 5” (127mm)
Corner = 45° angle for 90° corners.
Offset = 3.5” (89mm) from wall surface

ATTACHMENT POINTS 4 (Use appropriate fastener for wall surface)

MAX LOAD LIMIT 12 lbs. (5.4 kg.) Dependant on wall fastener

NUMBER PER BOX 8 pieces

Three inch Broadway panels with and without a 3.5” air space.

1.3

1.2

1.1

1.0

0.9

0.8

0.7

0.6

0.5

0.4

0.3

SOUND ABSORPTION COEFFICIENT

0.2

0.1

0

100Hz

125Hz

160Hz

200Hz

250Hz

315Hz

400Hz

500Hz

FREQUENCY (Hz) FREQUENCY (Hz)

630Hz

800Hz

1kHz

1.25kHz

3” Panel

3” Panel
with 3.5” offset

1.6kHz

2kHz

2.5kHz

3.15kHz

4kHz

5kHz

2”

(51mm)

RECOMMENDED NUMBER OF IMPALERS PER PANEL:

Order No. Description HEIGHT WIDTH DEPTH

F102-2448-XX Broadband Panels 24” (610mm) 48” (1219mm) 2” (51mm) 4

F122-2448-XX Broadband Panels 24” (610mm) 48” (1219mm) 2” (51mm) 4

F103-2448-XX Broadband Panels 24” (610mm) 48” (1219mm) 3” (76mm) 4

F123-2448-XX Broadband Panels 24” (610mm) 48” (1219mm) 3” (76mm) 4

Two inch Broadway panels with Corner Impaler

1.3

1.2

1.1

1.0

0.9

0.8

0.7

0.6

0.5

0.4

0.3

SOUND ABSORPTION COEFFICIENT

0.2

0.1

0

50Hz

150Hz

200Hz

250Hz

300Hz

350Hz

400Hz

450Hz

500Hz

550Hz

600Hz

700Hz

800Hz

900Hz

1.0kHz

2.0kHz

No. of

Impalers

Needed

3.0kHz

4.0kHz

Primacoustic is a division of Radial Engineering Ltd. • 1588 Kebet Way Port Coquitlam, BC V3C 5M5 • Tel: [phone] Fax: [phone]

www.primacoustic.com • [e-mail] • Primacoustic Engineering Data Sheet • Part #R870 2200 00 • Copyright © 2016 • Subject to change without notice.

ENGINEERING DATA SHEET

HeliX

The Helix™ is a solid zinc die-cast device that integrates an eye hole and
a wide screw that create a reliable and sturdy anchor for hanging any
Primacoustic panel as an acoustic cloud using the adjustable SlipNot™
suspension system shown below.

SPECIFICATIONS:

ORDER NUMBER F101-1006-00

MATERIAL Plastic

MAX LOAD LIMITS 45 lbs. (20.4 kg.) per anchor

NUMBER PER BOX 12 pieces

cORKscReW

Designed to create a vertical bafe using any Broadway or Paintables

panel, the Corkscrew™ is a tensioned steel screw that twists into the
edge of a panel for placement overhead. Combining the Corkscrew with
the SlipNot enables the panel to be quickly adjusted to achieve a uniform
height.

SPECIFICATIONS:

ORDER NUMBER F101-1004-00

MATERIAL Steel

MAX LOAD LIMITS 45 lbs. (20.4 kg.) per anchor

NUMBER PER BOX 12 pieces

sliPnOt

Designed to suspend Primacoustic clouds and bafes, the SlipNot™ is a

unique 76” (193cm) suspension cable system that combines aircraft steel
rope with a cam-style releasable hook for easy height adjustment at one

end and a simple eye-sling at the other. One merely attaches the sling to a
suspension point and clips the hook onto the Primacoustic cloud or bafe

using either the Corkscrew or Helix panel mounting screws.

SPECIFICATIONS:

ORDER NUMBER F101-1011-00

MATERIAL Steel

MAX LOAD LIMITS 45 lbs. (20.4 kg.) per anchor

NUMBER PER BOX 12 pieces

CABLE LENGHT 76” (193cm)

Primacoustic is a division of Radial Engineering Ltd. • 1588 Kebet Way Port Coquitlam, BC V3C 5M5 • Tel: [phone] Fax: [phone]

www.primacoustic.com • [e-mail] • Primacoustic Engineering Data Sheet • Part #R870 2200 00 • Copyright © 2016 • Subject to change without notice.

Rotofast™

clOuD AncHOR

Suspending Broadway panels has never been easier or faster. Simply twist
Cloud Anchors into the back of any 2” (5cm) or 3” (7.5cm) Broadway panel
for a strong and secure installation.

The integrated eye-screw allows overhead suspension by tie-wire or chain.
The Cloud Anchor is perfect for hanging Broadway acoustic panels in

restaurants, call centers, boardrooms, schools and ofces.

SPECIFICATIONS:

ORDER NUMBER F101-1007-00

MATERIAL Plastic and steel

MAX LOAD LIMITS 45 lbs. (20.4 kg.) per anchor

NUMBER PER BOX 12 pieces

ENGINEERING DATA SHEET

2” Cloud Anchor Ceiling
Mounted

2” Wall Mounted

SOUND ABSORPTION COEFFICIENT

FREQUENCY (HZ)

2” Urethane Wall Mounted

Rotofast™

snAP-On AncHOR

The Snap-On Anchor locks the panel onto any at surface for installations

where panels need to be mounted securely. Simply twist the anchor into
the panel using the included tool and attach the corresponding locking pins
to the wall or ceiling. The panel clicks and locks onto these pins, providing

safe overhead/ceiling mounting and secure wall mounting in high trafc

areas.

SPECIFICATIONS:

ORDER NUMBER F101-1009-00

MATERIAL Plastic

MAX LOAD LIMITS 45 lbs. (20.4 kg.) per anchor

NUMBER PER BOX 50 pieces, tool, marking plugs

Primacoustic is a division of Radial Engineering Ltd. • 1588 Kebet Way Port Coquitlam, BC V3C 5M5 • Tel: [phone] Fax: [phone]

www.primacoustic.com • [e-mail] • Primacoustic Engineering Data Sheet • Part #R870 2200 00 • Copyright © 2016 • Subject to change without notice.