Prima PFP200 User Manual

FOOD PROCESSOR

MODEL: PFP200

USER GUIDE

WITH RECIPES

Visit our web site at: www.prima-international.com

IMPORTANT SAFEGUARDS

CAUTION: PLEASE TAKE CARE WHEN UNPACKING. SOME OF THE ATTACHMENTS

ARE VERY SHARP.

1. Do not immerse the base of your food processor in water or any other liq uid. Simply wipe with soft
cloth moistened with a mild detergent solution.

2. Close adult supervision is necessary when using this or any appliance where children are present.

3. Always allow the machine to come to a complete stop before removing any of the accessories.

4. Never leave the appliance connected to the mains and unattended.

5. Avoid contacting m oving parts. Always wait until the motor has stopped before opening t he lid of the
processor bowl.

6. Do not use any attachments other than those supplied. To do so would invalidate your warranty.

7. Do not let the cord hang over the edge or counter top.

8. Never interfere with or try to bypass the safety switches.

9. Handle the chopping blade, slicing and shredding blades with extreme care. They are very sharp.

10. Do not use out doors.

11. Please note that this appliance is for domestic use only.

The wires in the mains lead are coloured in accordance with the following code:

BROWN - LIVE (L)
BLUE - NEUTRAL (N)

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured

markings identifying the terminals in your plug, proceed as follows:

• The BLUE wire is the NEUTRAL and must be connected to the terminal which is marked with the letter
N or coloured BLACK

• The BROWN wire is the LIVE and must be connected to the terminal, which is marked with the letter L
or coloured RED.

Always ensure that the cord grip is positioned and securely fastened.

WARNING: ON NO ACCOUNT MUST EITHER THE LIVE OR NEUTRAL WIRES BE CONNECTED TO THE

EARTH TERMINAL

1. PARTS IDENTIFICATION

Before using your Food Processor for the first time it’s a good idea to get to know the product first. Use the diagrams below as a guide and fam iliarise yourself with your Prima Food Processor.

IMPORTANT

THE FOOD PROCESSOR IS EQUIPPED WITH A SAFETY INTERLOCK SWITCH. THIS IS
FITTED TO PREVENT THE UNIT BEING ACTIVATED WHEN BLADES ARE EXPOSED. THE

MOTOR WILL NOT RUN UNLESS THE INTERLOCK TAG (A4) ON THE PROCESSOR LID IS
CORRECTLY INSERTED INTO THE SAFETY INTERLOCK SLOT (1) ON THE MOTOR
BASE.

2. NOTES ON ASSEMBLY

1. Processor bowl: The processor bowl ‘A’ sits on locating pegs as shown in the picture. The
lid is fitted as shown then turned anti-clockwise so that the interlock tag (A4) slots into the
safety interlock slot (1). Important The capacity of the processor bowl is 1.1 litres. Never
exceed the maximum fill level marked on the side of the processor jug.

2. The grating/slicing disk (B) must be attached to the spindle (B1) b e fore putting them over
the shaft in the processor bowl. Note that the grating/slicing disk (B) is reversible. When
fitting the disk to the spindle push it in firmly then turn the spindle slightly to lock it into place.
Take care when handling the disks – the blades are very sharp. Fit the lid as shown &
use either the pulse settings or speed 1 for chipping or slicing, speed 2 for shredding.
Always use the food pusher (A1) to gently force food through the grating/slicing blade.