Prima PCC500 User Manual

Stainless Steel

Jug Kettle

Instruction Leaflet

MODEL PCC500

Visit our website at www.prima-international.com

STAINLESS STEEL JUG KETTLE MODEL: PCC500 Prior to First Use

• Remove all packing materials from the inside and outside of the kettle.

• BOIL FRESH WATER INSIDE THE KETTLE TWO TO THREE TIMES

AND DISCARD THE BOILED WATER BEFORE NORMAL USE

• Always use the appliance on a heat-resistant, flat surface.

• Fill the kettle with the desired quantity of cold water between the Min. and

Max. level. You can either remove the lid to fill the kettle or fill th rough the spout.

• Place the lid back on to the kettle.

• Plug the kettle into the wall socket and press the ‘ON/OFF’ switch to the

ON position. The power indicator light will then be illuminated.

• When the water has boiled, the ke ttle will switch off automatically.

• It is extremely important to remember that cleaning of the kettle can only be performed when the plug has been removed from the supply.

• Never immerse any part of the kettle especially the cable and base plate into water.

• Cleaning should be performed when the kettle has cooled down.

• Always ensure the electrical connections of the kettle remain absolutely

dry.

• Clean the kettle with a damp cloth. Do not use cleaning products, which can cause health hazard or discoloration of the kettle.

• Ensure the outside and the electrical connection parts of the kettle are completely dry before using.

De- scaling

• It is important to de-scale the kettle at regular intervals in order to maintain its efficiency.

• The frequency of de-scaling will depend upon the area in which you live

• There are many de-scaling powders and tablets available in supermarkets

& hardware stores. Just follow the instructions on the packet.

+ 3 hidden pages