Prima PBL500C User Manual

Blender

Visit our web site at: www.prima-international.com

CAUTION: PLEASE TAKE CARE WHEN UNPACKING. SOME OF THE ATTACHMENTS

ARE VERY SHARP.

1. Do not immerse the base of your blender in water or any other liquid. Simply wipe with soft cloth moistened with a mild detergent solution.

2. Close adult supervision is necessary when using this or any appliance where children are present.

3. Always allow the machine to come to a complete stop before removing the jug.

4. Never leave the appliance connected to the mains and unattended.

5. Avoid contacting moving parts. Always wait until the motor has stopped before opening the lid of the blender jug.

6. Do not use any attachments other than those supplied. To do so would invalidate your warranty.

7. Do not let the cord hang over the edge or counter top.

8. Never interfere with or try to bypass the safety switches.

9. Handle the blades with extreme care. They are very sharp.

10. Do not use out doors.

11. Please note that this appliance is for domestic use only.

The wires in the mains lead are coloured in accordance with the following code:

BROWN - LIVE (L) BLUE - NEUTRAL (N)

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured

markings identifying the terminals in your plug, proceed as follows:

• The BLUE wire is the NEUTRAL and must be connected to the terminal which is marked with the letter N or coloured BLACK

• The BROWN wire is the LIVE and must be connected to the terminal, which is marked with the letter L or coloured RED.

Always ensure that the cord grip is positioned and securely fastened.

WARNING: ON NO ACCOUNT MUST EITHER THE LIVE OR NEUTRAL WIRES BE CONNECTED TO THE

EARTH TERMINAL

+ 4 hidden pages