Prima LV-1958P User Manual

LV-1958P

Prima

WARNING AND CAUTION

CAUTION

RISK ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS

POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. (This item is only for TV with DVD models.)

IMPORTANT SAFETY INSTRUCTIONS

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15)The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

16)The mains plug or appliance inlet is used as the disconnect device, remain it readily operable during the apparatus normal use.

Safety Instructions(for TV with DVD)

PRECAUTIONS

FCC WARNING-This equipment may

generate or use radio frequency energy.Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual.The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

LASER SAFETY

This unit employs a laser.Only a qualified service person should remove the cover or attempt to service this device,due to possible eye injury.

CAUTION:USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION:VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.DO NOT STARE INTO BEAM.

LOCATION:INSIDE,NEAR THE DECK MECHANISM.

CONTENT

Safety Notice Items.......................................................................................

Front Panel Controls.....................................................................................

Connection Options......................................................................................

Remote Control ............................................................................................

Remote Control Key Functions .................................................................

Connection Instructions.................................................................................

Grounding..................................................................................................

External equipment Connections.................................................................

Antenna Connection.................................................................................

VGA Setup..............................................................................................

Component Setup....................................................................................

VCR Setup..............................................................................................

HDMI Input.............................................................................................

Cable TV Setup......................................................................................

External Component Source Setup..........................................................

Basic Operating Instructions.........................................................................

Switch On/Off the TV set............................................................................

Choose the input source............................................................................

Audio Control............................................................................................

Mute........................................................................................................

INFO........................................................................................................

Select the TV Channel You Want................................................................

Picture Mode............................................................................................

Audio Mode..............................................................................................

Sleep.......................................................................................................

GUIDE.....................................................................................................

ARC button...............................................................................................

-Button.....................................................................................................

CH.LIST button.........................................................................................

FAV.LIST button........................................................................................

Menu Operations.........................................................................................

Video Menu Options...................................................................................

Video Menu Options Continued...................................................................

Audio Menu Options...................................................................................

Audio Menu Options Continued...................................................................

Channel Menu Options...............................................................................

Channel Menu Options Continued...............................................................

Function Menu Options..............................................................................

Function Menu Options Continued..............................................................

Lock Menu Options ...................................................................................

Lock Menu Options Continued....................................................................

PC Menu Options......................................................................................

PC Menu Options Continued......................................................................

DVD Features...........................................................................................

Special Function Playback.........................................................................

DVD System Setup....................................................................................

Playable Discs..........................................................................................

Disc Protection and DVD Characteristics.....................................................

Troubleshooting Guide................................................................................

Specifications............................................................................................

Warranty ...................................................................................................

Note: DVD is available only on certain models. Please refer to your original set

for specific details.

1 2 3 4 5 7 7 7 7 8 8 9

9 10 10 11 11 11 11 11 11 12 12 12 12 12 12 13 13 13 14 14 15 16 17 18 19 20 21 23 24 28 29 30 32 33 38 38 39 40 41

Safety Notice Items

Incorrect usage may cause fire or electric shock.

required when you are installing, using and cleaning this machine. To your safety and extend the life-span of LCD-TV, please read the following items carefully before using:

l Please read and understand all the instructions before operation; l

Please keep this manual for later use;

Please comply strictly with the warning instructions on the machine and

in this book;

l Please comply with the instructions provided; l Please do not use additional devices that are not recommended by

manufacturer:

Before operation, please make sure that the operating voltage of your unit is

correct;

l Do not place the unit on unstable, dusty and humid places; l Never put the unit in direct sunlight or near heat sources; l Allow enough space for proper ventilation; l Please keep water away from the LCD-TV . If water comes in contact with the

LCD-TV, disconnect the power cord from the power source, then wipe the set with a dry soft cloth;

Do not remove the back cover. If service is needed, please contact an

Authorized service technician.

To prevent this, please do as

ensure

Front Panel Controls

2 3

TV/AV MENU VOL- VOL+ CH- CH+ POWER

Control Panel Function

1. Power Press to turn on and off the TV.

2. TV/AV

3. MENU Press to select the main menu

4. VOL- Volume down / Left button to adjust the item in the OSD VOL+ Volume up / Right button to adjust the item in the OSD /Press to enter

5. CH- TV channel down / to select the item in the menu CH+ TV channel up / to select the item in the menu

6. Power indicator

7. Remote Sensor

Selects the input signals.

Receives the signals from the remote control.

Connection Options

DVD

STOP

PLAY/PAUSE OPEN/CLOSE

PREV NEXT

DVD insert

Label towards back Please see the real set of the DVD position

The above figure is for reference only, connections may differ depending upon the models and terminals of some models may be on the back bottom of the set

HDMI

PCAUDIO INAUDIOIN VIDEOIN

VGAIN

Pb/Cb

COMPONENTIN

Pr/Cr

S-VIDEO

ANTIN

12 3

ANT IN

R AUDIO IN L

VIDEO IN

S-VIDEO

78910

COMPONENT IN

AUDIO

VGA IN

PC AUDIO IN HDMI

1. ANT IN(Antenna Input)

Connect cable or antenna signals to the TV, either

directly or through your cable box.

Headphone

3. Audio in Video in

4. Connect video output from an external device to this jack.

Connect audio output from an external device to these jacks.

5. S-VIDEO Connect S-Video out from an S-Video device to the jacks.

Audio in Connect audio output from an external device to these jacks. Component Input Connect a component video device to these jacks.

8. VGA

Connect to the VGA 15PIN analog output connector of a PC graphics card

to use set as a PC display.

PC audio in

9. Connect the audio output from the pc to the PC audio input port.

HDMI

10.

Connect to HDMI output of other equipment.

Remote Control

Installing Batteries

Remove the battery cover.

Insert two size AA batteries matching the +/-polarities of the battery to the +/marks inside the battery compartment (see image 1-for remote control of TV with DVD) ..

Insert two size AAA batteries matching the +/-polarities of the battery to the +/marks inside the battery compartment (see image 2-for remote control of TV without DVD) .

Image 1

Image 2

Precautions

Make sure that there is no obstacle between the remote controller and television set.

Keep the remote control away from heat sources or humid areas to ensure effective performance of the remote.

As strong light may interfere with the signals, change your position to operate the remote control if the television cannot be turned on or off as expected.

Make sure that two AA 1.5V or AAA depending up the model alkaline batteries are loaded. The batteries must be of the same type, must be inserted properly, and must not be rechargeable.

Remote Control Key Functions

When using the remote control, aim it towards the remote sensor on the TV

INFO

OPEN/CLOSE

MUTE

TV/AV

POWER TV/DVD

SLEEP Q.VIEW

1234

5678

SAP

CH+

VOL

OK S.MODE

CH-

STOP

SETUP

REV FWD PREV NEXT

D.MENU

PLAY/ENTER

ANGLE

PROGRAM

AUDIO

10+

EXIT ARC GUIDE

CH.LIST FAV.LIST

(For TV with DVD)

P.M O DE

VOL

PAUSE/STEP

SUBTITLE

A-B

REPEAT

SLOW

TITLE/PBC SEA RCH

D.CALL

ZOOM

Buttons on the remote control

Power

DVD Open/close

Input selection

TV Sleep button

TV/DVD

Mute

Return to previous channel in TV mode

Program Infromation

Program Number

Select MONO,STEREO, SAP in NTSC system

CC( closed caption) On / Off

Select additional channels

Adjust Picture Mode

Volume/Channel Selection

Confirm button

Adjust sound mode

DVD STOP

DVD SUBTITLE

DVD SETUP

DVD PAUSE/STEP

DVD FAST REVERSE

DVD FAST FORWARD

DVD MENU

DVD Next Chapter

DVD Previous Chapter

DVD REPEAT

DVD PLAY/ENTER

DVD A-B REPEAT

DVD Cursor Move button

DVD SLOW

DVD ANGLE

DVD SEARCH

DVD AUDIO Mode

DVD TITLE/PBC

DVD PROGRAM DVD Zoom Function

DVD CALL DVD 10+

Exit On Screen Display

Select the aspect ratio

Shows program schedule in TV

Open the channel list in TV

Open the favourite channel list in TV

LEFT

RIGHT

DOWN

Remote Control Key Functions

When using the remote control, aim it towards the remote sensor on the TV

Buttons on the remote control

MUTE

Q.VIEW INFO

INPUT EXIT

SAP P.MODE

CH+

VOL

SLEEP S.MODE

GUIDE ARC CH.LIST

FAV.LIST

CH-

VOL

Mute

Return to previous channel in TV mode

Input selection

Program Number

Select MONO, STEREO, SAP in NTSC system

Confirm button

Volume/Channel Selection

CC ( closed caption) On / Off

TV Sleep button

Shows program schedule in TV

Select the aspect ratio

Open the favorite channel list in TV

Open the channel list in TV

Adjust sound mode

Select additional channels

Adjust Picture Mode

Exit On Screen Display

Program Infromation

Power

(For TV without DVD)

Note: the instruction on this manual takes remote of TV with DVD for example.

Connection Instructions

Grounding

Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

External Equipment Connections

Antenna Connection

- Antenna or Cable Service with a Cable Box Connections

- For optimum picture quality, adjust antenna direction if needed.

Multi-family Dwellings/Apartments (Connect to wall antenna socket)

wall antenna socket

RF coaxial wire (75 ohm)

Bronze Wire

VHF antenna UHF antenna

outdoor antenna

Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)

NOTE: Cables shown are not included with the TV

Turn clockwise to tighten.

Be careful not to bend the bronze wire when connecting the antenna.

To improve picture quality in a poor signal area, purchase and install a signal amplifier.

If the antenna needs to be split for two Tvs, install a 2-Way Signal Splitter in the connections.

If the antenna is not installed properly,

contact your dealer for assistance.

Bronze Wire

Connection Instructions

VGA Setup

You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied).

Connection and use steps:

1.Read the user guide supplied with your computer and ensure that it has a VGA connector;

2.Make sure that the power of the LCD

-TV and the PC are off;

3.Connect a D type 15-pin PC interface cable ( not supplied ) to the PC video interface connector on the PC. Then connect the other end to the PC video interface connector on the back of the LCD-TV.Tighten the screws on the PC connectors once they are firmly connected;

4.Turn on the power of the LCD-TV first , and then turn on the power of the PC;

5.Press the TV/AV button to set the video input mode of the LCD-TV to PC; Once the input for PC is selected and if you see no image press function F8 on you pc.

6.Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC mode to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.

Resolution

Mode

VGA

SVGA

XGA

Note: All above listed are subject to VESA criteria.

Resolution

640x480

800x600

1024x768

Line frequency(KHz)

31.5

37.9

48.4

Frame frequency(Hz)

Component Setup

How to connect

Connect the DVD video outputs (Y, PB, PR) to the Component(Y, Pb, Pr) IN jacks on the TV and connect the DVD audio outputs to the AUDIO IN jacks on the TV, as shown in the figure. NOTE: If your DVD player does not have component video output,use S-Video.

How to use

1. Turn on the DVD player, insert a DVD.

2. Use the button on the remote control to select the proper input.

TV/AV

Connection Instructions

VCR Setup

- To avoid picture noise (interference), leave an adequate distance between the VCR and TV

Connection and use steps:

1.Read the user guide supplied with your AV devices and ensure that it has Composite or S-Video connectors;

2.Make sure that the power of the LCD-TV and the AV device are off;

Connection Option 1

Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

Connection Option 2

1. Connect the audio and video cables from the VCR's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to VCR, match the jack colors (Video = yellow, Audio Left = white,and Audio Right = red). If you connect an S-VIDEO output from VCR to the S-VIDEO input, the picture quality is improved; compared to conne cting a regular VCR to the Video input.

2. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.)

.Turn on the LCD-TV first ; and then turn on the

power of the AV device;

4.Press the TV/AV button to set the video input mode of the LCD-TV to S-Video mode or Video mode.

VCR

HDMI Input

How to connect

Connect the cables from the external equipment's output jacks to the TV input jacks, as shown in the figure.

How to use

1. Select the input source by using TV/AVbutton

on the remote control or on the TV.

Operate the corresponding external equipment.

Refer to external equipment operating guide.

HDMI

Connection Instructions

Cable TV Setup

- After subscribing to a cable TV service from a local provider you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV.

- For further information regarding cable TV service, contact your local cable TV service provider(s).

Connection Option 1

1. Select 3 or 4 with channel switch on cable box.

2. Tune the TV channel to the same selected output channel on cable box.

3. Select channels at the cable box or with the cable box remote control.

Connection Option 2

1. Connect the audio and video cables from the Cable Box's output jacks to the TV input jacks, as shown in the figure.When connecting the TV to a Cable Box, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

2. Select the input source by using the

TV/AV

3. Select your desired channel with the remote control for cable box.

button on the remote control.

External Component Source Setup

How to connect

Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

How to use

1. Select the input source by using the button on the remote control.

2. Operate the corresponding external equi-

pment. Refer to external equipment ope rating guide.

TV/AV

Basic Operating Instructions

Switch On/Off the TV set

When the POWER button is pressed and the LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned off using the power button, the LCD-TV will go into standby mode and the indicator light turns red(or turns dark).

NOTE: The color of the indicator light may differ based upon the model purchased.

Choose the input source

Change the picture source so you can watch your TV, VCR, DVD, Cable , or any other devices that are connected to your TV.

1. Press the TV/AV button to enter the Select Source menu and then use TV/AV button to select the desired items TV, Video, S-Video, Component

DVD, PC, HDMI .

2. Press the OK button to confirm .

Audio Control

1.Press the VOL+ button to increase the volume. A number will appear on screen indicating the volume level.

2.Press the VOL- button to decrease the volume. A number will appear On screen indicating the volume level.

Mute

1.Press the MUTE button to mute the sound temporarily. A mute icon Appears on the screen.

2.Press the MUTE button or VOL+ again to restore the sound. The mute icon disappears.

INFO

Press INFO button to display current program information.

Basic Operating Instructions

Select the TV Channel You Want

You can use the number buttons and button on the remote control to directly select TV channels and press OK to confirm. And you can press the buttons(CH+/CH-) on the remote control or on the panel to make a selection.

Picture Mode

Press P.MODE button on the remote control for menu display . For desired mode as follows:

Mild Standard Vivid Custom

Audio Mode

Press S.MODE button on the remote control for menu display . For desired mode as follows:

Off Concert Living Room Hall Bathroom Cave Arena Church

Sleep

Press SLEEP button to set the time : Off

-60 Min-90 Min-120 Min-180 Min-240Min

This function allows you to turn off the television after a pre-selected

number of

minutes

-5 Min-10 Min-15 Min-30 Min- 45 Min

GUIDE(only available in digital signal)

Press GUIDE button in digital channels to display Guide menu.(This menu is just for you to see the information and can not be changed) Press CH+/CH- to select information for you to look over.

ARC button

Press to select the aspect ratio among Full Screen, Normal, Wide, Zoom and Cinema. (Display mode may differ from different inputs)

Basic Operating Instructions

button

Press to select additional channels (digital and analog) being broadcast by the same station. For example, to select digital channel “11.1”, press “11”, then press “ ” and “1”.

CH.LIST button

Press to display the channel list. Press VOL+/VOL- to turn to the next or previous page, press CH+/CH- to select the item and OK button to select the channel you desired.

FAV.LIST button

Adding favorite channels Press FAV.LIST under one channel. The favorite channel list opens. Press CH+ or CH– to select a blank box, then press OK to confirm . The channel will be added to the favorites channel list. Press OK again, the channel will be removed from the favorites channel list.

Tuning to a favorite channel Press FAV.LIST. The favorite channel list opens. Press CH+ or CH– to select the channel and press OK to confirm . Your LCD TV automatically tunes to the channel you selected.

Menu Operations

* In this manual, the OSD (On Screen Display) may be differ from your TV

These are examples to illustrate the TV's operation. Press TV/AV to select the input source. The menu for each source may be different .

1. Press MENU button to display the main menu, and CH+/CH- to select the main menu function.

2. Press VOL+/OK button to enter the sub menu and CH+/CH- to go up and down to select the desired option .

3. Press VOL+/OK button to confirm and VOL+/VOL- to make changes to the parameters

4. Press the EXIT button to return to the main menu.

5. Press the MENU button to exit the menu screen.

Video Menu Options

Picture quality can be adjusted for any input separately .

The picture quality on the screen can be adjusted as follows:

1. Press MENU button and CH+/CH- until the following menu appears on the screen.

2. Press VOL+/OK button to enter the menu function and CH+/CH- to scroll up and down to select the desired function.

3.Press VOL+/OK button to confirm and VOL+/VOL- increase and decrease the level to adjust the selected option to your preference .

4. Repeat step 2 and step 3 until desired picture quality has been achieved .

Video

Audio

Channel

Function

Lock

Video

Note:

1.The options may be different because of the inputs.

2.Symbols on top of the menu in this manual may differ from the actual set display.

3.The picture options can be changed only in Custom mode only, the other modes

are fixed.

Mode Custom Brightness Contrast Color Tint Sharpness Color Temperature Advanced Video

CH+/VOL+/-

Select

50 50 50

EXITOK

BackAdjust

Menu Operations

Video Menu Options continued

Function:

Mode: Select the type of picture which best corresponds to your viewing

requirements by selecting Picture Mode in Video menu. You may select the picture mode directly by pressing theP.MODE button on the remote control.

Brightness :Press CH+/CH- button andVOL+/OK to confirm, then press VOL+/VOL- to adjust the brightness of the picture.

Contrast : PressCH+/CH- button and VOL+/OK to confirm, then press VOL+/VOL- to adjust the contrast of the picture.

Color : PressCH+/CH- button and VOL+/OK to confirm, then press VOL+/VOL- to adjust color saturation.

Tint : Adjust the tone of the picture .

Sharpness : Adjust the amount of the detail enhancement , the image

sharpness rises as the number increases (By increasing the level, it will show cleaner and clearer images and by decreasing the level, it will make the picture smoother).

Color Temperature: This will increase or decrease Warm (red) and Cool (blue) colors to suit personal preferences.Select Cool to give the white colors a blue tint, Standard to give the white colors a neutral tint, Warm to give the white colors a red tint.Custom to allow you change the color manually.

Contrast, Brightness, Sharpness , Color Temperature and Tint can only be adjusted when Mode in Custom mode.

Advanced Video:To adjust the picture in advanced level:

DNR: Digital Noise Reduction. To adjust to reduce the appearance of digitizing

error caused by the compression:Medium,Strong,Auto,Off and weak. Black Level Extender: To adjust the ability in the black areas detail of the picture:On and Off. White Peak Limiter: To adjust the ability in the white areas detail of the picture:On and Off. CTI: Color Transient Intensity.To adjust the picture for color errors:Medium,Strong, Off and weak.

Flesh Tone:To adjust the flash colors:On and Off. Adaptive Luma Control: To adjust changes in the luminance of the picture:On and Off

Menu Operations

Audio Menu Options

Sound can be adjusted for any input as follows:

1. Press MENU button and CH+/CH- until the following menu appears on the screen.

Video

Audio

Channel

Function

Lock

Audio

Balance Bass Treble Sound Surround On Mode Off Equalizer Off AVL Off Audio Only

CH+/VOL+/-

You can adjust sound options to the levels you prefer.

2. Press VOL+/OK button to enter the Audio menu and CH+/CH- to go up and down to select the desired option .

3.Press VOL+/OK button to confirm and VOL+/VOL- increase and decrease the level to adjust the selected option to your preference .

4. Repeat step 2 and step 3 until desired audio quality has been achieved .

Select

0 50 50

EXITOK

BackAdjust

Function :

Balance : PressCH+/CH- button and VOL+/OK to confirm, then press VOL+/VOL- to adjust the audio output between left and right speakers.

Bass : PressCH+/CH- button and VOL+/OK to confirm, then press VOL+/VOL- to increase or decrease the level of the lower-pitched sounds .

Treble : Press CH+/CH- button andVOL+/OK to confirm, then press VOL+/VOL- to increase or decrease the level of the higher-pitched sounds

Sound Surround: To turn the simulated surround sound on and off.

Mode : PressVOL+/OK to select the type of sound which best

corresponds to your lightning requirements by selecting Mode in Audio menu.

Equalizer: To adjust the equalizer: Off, Rock, Pop, Live, Dance, Techno, Classic and Soft.

+ 49 hidden pages