Prima J2180K Schematic

Factory menu adjustment methods

3.1 Enter/exit factory adjustment method

Use remote control, press MENU! button, then press 6483, M! will appear on screen to show that you

have entered the factory adjustment method, press STANDBY! to exit it. Use factory remote control,

press the PRESET! and TEST! button, then the screen display M! which means you have entered into

the factory adjustment mode, press the TEST! to exit.

3.2 select adjustment item and adjust data

After entering factory adjustment mode, press 1-4 number buttons to select menu 1- menu 4; to enter

into MENU0, MENU5-MENU9, you may return to MENU1-MENU4 or just after you enter into M!

interface, quickly press CHILD LOCK! button and then the number button (0,5-9) to enter into relative

menus. Press CH+! and CH-! to select and V+! and V-!to adjust.

At "program" item of MENU1, press V+!, V-! or the number button 0-9 to switch channel, only after exit

the program! item you can do other operation.

3.3 User purview

a). Factory adjustment mode menu1-menu4: only debugging worker, service checker, craftwork

technician, designer may operate.

b). Factory adjustment mode menu0, menu5-menu9: only craftwork technician, designer may operate.