Prima CV1311, CV2011 Owner's Manual

Download

Page 1

Before operating the unit, please read this manual thoroughly.

OWNER S MANUAL'OWNER S MANUAL

ATSC ROUND TV/DVD COMBO

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

EXIT

D.CALL

TV/AV

PROGRAM

ZOOM

10+

ARC

VOL +

SUBTITLE

TV/DTV

SAP

S.MODE

GUIDE

CH.LIST FAV.LISTAUDIOLIST SLEEP

Page 2

PRECAUTIONS

FCC WARNING-This equipment may generate

or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.

LOCATION:INSIDE,NEAR THE DECK MECHANISM.

CONTENTS

Before Operation

Basic operation

Important Safety Instructions............................................................

Installation...........................................................................................

..........................................................................

Preparation of the remote control......................................................

Function buttons and ...................................

Front panel of the TV set..................................................................

Rear panel of the TV set....................................................................

Using the remote control...................................................................

The other video and audio equipment .................................................

Antenna connections ...........................................................................

Cable TV connections .........................................................................

Connections the other equipment .......................................................

Setting the language and blue screen .................................................

Channel menu .....................................................................................

Channel selection ................................................................................

Volume adjustment .............................................................................

Screen information ..............................................................................

Video menu ........................................................................................

Manual time setting ............................................................................

Setting the ON/OFF timer ..................................................................

Function menu ...................................................................................

Closed caption ...................................................................................

DTV setup menu ................................................................................

Other function ...................................................................................

........................................................................

Specifications .....................................................................................

Warranty ............................................................................................

Antenna Connection

External Connections

Troubleshooting guide

DVD Features...................................................................................

Special Playback Functions..............................................................

DVD System Setup..........................................................................

Playable Discs...................................................................................

Disc Protection and DVD Characteristics..........................................

Others

1 5 5 5 6 6 6 7 8 9 10 11

12 13 15 16 17 18 20 21 22 27 28 33

35 37 38 42 43

44 45 46

DVD Operation

Page 3

1. READ THESE INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2. KEEP THESE INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED ALL WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4. FOLLOW ALL INSTRUCTIONS

All operating and use instructions should be followed.

5.CLEAN ONLY WITH DRY CLOTH.

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning the exterior cabinet only.

6. DO NOT BLOCK ANY VENTILATION OPENINGS. INSTALL IN ACCORDANCE WITH THE

MANUFACTURER`S INSTRUCTIONS.

7. DO NOT USE THIS APPARATUS NEAR WATER

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

12. VENTILATION

Slots and openings in the cabinet back or bottom are provided for ventilation, to ensure reliable operation of the unit, and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the unit

on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper

ventilation is provided and/or the manufacturer`s instructions have been adhered to.

13. POWER SOURCES

This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions.

14. GROUNDING OR POLARIZATION

S3126A

PORTABLE CART WARNING

(symbol provided by RETAC)

Caution - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure

Product complies with radiation performance standards under the Federal Food, Drug and Cosmetic Act

11.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

10. Only use attachments/accessories specified by the manufacturer.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

15. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

16. Unplug this apparatus during lightning storms or when unused for long periods of time.

17. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Important safety Instructions

Page 4

19. LIGHTNING

To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

20. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.

21. OVERLOADING

Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

22. OBJECT AND LIQUID ENTRY

Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

23. OUTDOOR ANTENNA GROUNDING

If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

24. SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

25. DAMAGE REQUIRING SERVICE

Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the

unit to its normal operation. e. If the unit has been dropped or the cabinet has been damaged. f . When the unit exhibits a distinct change in performance, this indicates a need for service.

26. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

27. SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

28. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

29. DISC TRAY

Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.

30. CONNECTING

When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections.

IMPORTANT SAFEGUARDS

Page 5

Important safety Instructions

EXAMPLE OF ANTENNA GROUNDING AS PER THE

NATIONAL ELECTRICAL CODE

CONDENSATION

Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, the unit's performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the unit is exposed to the breeze from an air conditioner. In such cases, change the location of the unit.

31. LASER BEAM

Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It may cause sight damage.

32. DISC

Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction.

33. NOTE TO CABLE TV SYSTEM INSTALLER

This reminder is provided to call the CABLE TV system installer s attention to Article 820-40 of the NEC that' provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

ANTENNA LEAD IN WIRE

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

GROUND CLAMP

ELECTRIC SERVICE

EQUIPMENT

NEC-NATIONAL ELECTRICAL CODE S2898A

Page 6

Installation

Preparation for the remote control

Battery installation

Tips for remote operation

Remove the battery cover.

! When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries to prevent leakage.

! Do not throw the batteries into fire. Dispose of used batteries in the specified manner.

! Do not drop, dampen or disassemble the remote control.

Insert two size AA batteries matching the +/-polarities of the battery to the +/marks inside the battery compartment.

Antenna connection

300 twin-lead cable

Antenna adapter

75 coaxial cable

Plug

AC power socket

Aerial input

75 standard

coaxial type

Note: * It is recommended that a 75 ohm coaxial antenna is used to avoid interference. *To avoid interference from electrical signals, do not bind the antenna cable together with any mains lead.

(Not supplied)

If the picture is not clear or is snowy, it is recommended that an External Aerial is used, this is usually mounted outside.

Page 7

Parts and functions

Rear panel of the TV set

Front panel the TV set

Antenna input socket

Video Cr input terminal

Audio left channel input terminal

Audio right channel input terminal

Audio left channel output terminal

Audio right channel output terminal

Video Cb input terminal

Video Y input terminal

Video 2

Video output terminal

OUT

VIDEO1

L R

AUDIO

Power Switch

Power Indicator

Signal Receiver

Video

R/L Audio

TV/AV/DVD Switching

Volume up/ down

Channel Position up/down

Open/close the DVD

Play the DVD

Stop the DVD

The DVD Player

Stop

Remote Receiving

Window

Power Button

POWER

COMPONENT

COAXIAL OUTPUT

TV/AV/DVD Switching

Page 8

Page 9

Using the Remote Control

Q.VIEW button:

SAP button:

P.MODE (picture mode):

TV Sleep button

CH.LIST (channel list)

GUIDE

FAV.LIST (favorite list)

SIZ: Aspect Ratio Control under 16:9 digital signal input

DVD FAST REVERSE

DVD PAUSE/STEP

DVD FAST FORWARD

DVD MENU

DVD A-B REPEAT

DVD Cursor Move button

DVD SLOW

DVD SEARCH

DVD TITLE

DVD PROGRAM

10+

CLR: clear

Power Switch

TV / AV Mode Selection

TV / DTV Mode Selection

TV / DVD Mode Selection

Mute Sound

Return to Previous Channel

Channel / Track Selection

Second Audio Program

Mode Selection: Closed captioning (selects mode).

Adjust Picture Mode

Adjusting

Go to TV Menu

Exit On Screen Display

reference (may not operate using some systems)

Enter

Playback

Selection

Chapter / Track

Playback / Confirm Menu Selection

Mode

Change

Mode

DVD INFORMATION

Zoom Function

Open/close DVD Tray

On Screen Display

Volume/Channel

DVD STOP

DVD SETU

DVD CAPTION (SUBTITLE)

DVD NEXT

DVD

DVD REPEAT

DVD ANGLE

DVD AUDIO

DVD PREVIOUS

Buttons on the remote control

DOWN

LEFT

RIGHT

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FA V.LIST SIZ GUIDE

- button: select additional channels being broadcasted. For example, to select channel “54-3”, press “54”, “-”, “3”, and then press “OK”.

Page 10

Preparation for the remote control

Battery installation

Tips for remote operation

Remove the battery cover.

! When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries to prevent leakage.

! Do not throw the batteries into fire. Dispose of used batteries in the specified manner. ! Do not drop, dampen or disassemble the remote control.

Insert two size AA batteries matching the +/-polarities of the battery to the +/marks inside the battery compartment.

The other video and audio equipment Connections

You can connect the DVD,VCR and stereo system to the output to enjoy a

higher quality of picture and sound effect.

COAXIAL OUT

Coaxial cable

To COAXIAL

type digital

audio input

Amplifier

ANT IN

Page 11

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CABLE), see the Cable TV connections.

Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires)

Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

Antenna connections

75 ohm coaxial cable

300-75 ohm matching transformer

UHF 300 ohm

VHF 300 ohm

UHF 300 ohm

VHF 75 ohm

Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

RF IN

jack

RF IN

jack

RF IN

jack

Combiner

RF IN

jack

Combiner

Connect the 75 ohm cable from the combination VHF/UHF antenna to the RF IN jack.

Connect the UHF 300 ohm twin-lead wire to the combiner (not supplied). Connect the VHF 300 ohm twin-lead wire to the 300-75 ohm matching transformer. Attach thetransformer to the combiner, then attach the combiner to the RF IN jack.

Connect the VHF 75 ohm cable and UHF 300 ohm twin-lead wire to the combiner. Attach the combiner to the RF IN jack.

If using a flat UHF 300 ohm twin-lead wire, connect these flat wires to an optional 75/300 ohm matching transformer/adapter (available at many retailers), and then connect the adapter to the 'RF' IN connector on the back of the television.

Page 12

FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE

For basic cable service not requiring a Converter/Descrambler box, connect the 75 ohm Coaxial Cable directly to the RF IN Jack on the back of the unit.

Cable TV connections

FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE

75 ohm coaxial cable

If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the use of a converter/descrambler box, you may wish to use a signal splitter and an A/B switch box (available from the cable company or an electronics supply store). Follow the connections shown below. With the switch in the "B" position, you can directly tune any nonscrambled channels on your unit. With the switch in the "A" position, tune your unit to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to tune scrambled channels.

FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH SCRAMBLED PREMIUM CHANNELS

Incoming 75 ohm cable TV cable

75 ohm cable to

unit

RF IN

jack

RF IN

jack

Splitter

Incoming 75 ohm cable TV cable

A/B switch

75 ohm cable to unit

Converter/

descrambler

RF IN

jack

Converter/

descrambler

This unit has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer "premium pay channels" in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.

If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the incoming 75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm coaxial cable, connect the output jack of the converter/descrambler box to the RF IN jack on the unit. Follow the connections shown below. Set the unit to the output channel of the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to select channels.

Page 13

Video Game

Using the audio/video inputs

If you connect the TV to a camcorder or Video Game, you can select different modes by pressing

TV/AV.

Press TV/AV repeatedly to select the desired mode. "AV1 V channel will display on the screen for 4 seconds, no signal will be

displayed on the screen when no signal input.

", "AV2" ,"COMPONENT","DVD" or T

To connect the TV to a camcorder

To playback from the camcorder, connect the camcorder to the unit as shown.

To connect the TV to a Video Game

The TV can also be used as a display device for many video games. However, due to the wide variety

of formats, they have not all been included in the suggested connection diagram. Youl need to consult

each component's Owner's Manual for additional information.

Audio/Video cord (not supplied)

To Audio/Video OUT

AV 1

Camcorder

To Audio/Video OUT

Audio/Video cord (not supplied)

VIDEO IN

AUDIO IN (L)

AUDIO IN (R)

AV1 AV2 COMPONENT DVD TV Channel

Connections to other equipment

VIDEO IN

AUDIO IN (L)

AUDIO IN (R)

Front of TV

Page 14

Setting the language and blue screen

You can choose from three different languages (English, French and

Spanish) for the on-screen displays.

1 Press POWER ( ) to turn on the TV.

2 Press MENU, and then

press VOL+/- button to select FUNCTION menu, then press CH- button to enter.

3 Press CH+/- button to select the LANGUAGE option,

then press VOL+/- to select the desired language: English, Spanish or French.

4 Press MENU until the MENU screen disappears.

SETTING THE LANGUAGE

0101

LANGUAGE ENGLISH BLUE SCREEN ON NTSC CAPTION C1 PARENTAL LOCK

FUNCTION

SETTING THE BLUE SCREEN

1 Press MENU, and then

press VOL+/- button to select FUNCTION menu, then press CH- button to enter.

2 Press CH+/- button to select the BLUE SCREEN option,

then press VOL+/- to select OFF or ON.

3 Press MENU until the MENU screen disappears.

0101

LANGUAGE ENGLISH BLUE SCREEN ON NTSC CAPTION C1 PARENTAL LOCK

FUNCTION

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

Page 15

AUTO SCAN (DTV/ATV) (When using antenna) The channels broadcasted in DTV and ATV are automatically scanned and memorized. Only the receivable channels in the area where this TV is used will be memorized.

AUTO SCAN (CATV) (When using basic cable) The channels broadcasted in CATV are automatically scanned and memorized.

NOTE:

Be sure that antenna or cable is connected properly before plugging the power cord.

Here describes the case for searching and memorizing channels for DTV/ATV.

1 Press MENU, and then press VOL+/- button to select

CHANNEL menu, then press CH- button to enter.

2 Press CH+/- button to

select the RECEPTION option.

3 Press VOL +/- button

to select AIR/ CABLE.

0101

SKIP OFF RECEPTION AIR AUTO SCAN COLOR SYSTEM AUTO

CHANNEL

When scanning is completed, the memorized smallest channel will be displayed.

When you press MENU button while scanning, the scanning is interrupted and the memorized smallest channel is displayed.

When you press VOL+ on the remote control, scanning the channels in both analog and digital modes will automatically start.

Channel menu

Only in analog signal

4 Press CH +/- button

to select AUTO SCAN option.

5 P ress VOL+ button to start scanning.

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

Page 16

Channel menu

SETTING SKIP

0101

SKIP OFF RECEPTION AIR AUTO SCAN COLOR SYSTEM AUTO

CHANNEL

1 Press MENU, and then

press VOL+/- button to select CHANNEL menu, then press CH- button to enter.

2 Press CH+/- button to

select the SKIP option, then press VOL+/- button to select ON or OFF.

SETTING COLOR SYSTEM(only in ATV mode)

After the programs are presetting, you can skip some programs so that to select your favorite channels only.

If you want to recover the skipped channel

1. Use Direct-digit Choosing button to select the number of the channel to be recovered.

2. Do the above steps again.

3. Press VOL+/- button to set SKIP as Off.

1 Press MENU, and then

press VOL+/- button to select CHANNEL menu, then press CH- button to enter.

2 Press CH+/- button to

select the COLOR SYSTEM option, then

press VOL+/- button to select AUTO or NTSC.

0101

SKIP OFF RECEPTION AIR AUTO SCAN COLOR SYSTEM AUTO

CHANNEL

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

NOTE: When tuning DTV channels and no signal is present,

the SKIP-over option will be available.

Page 17

You can select the channel by using either CH +/- button or Channel number buttons. How to select the channel in each way is shown below.

Channel selection

CABLE

VHF 2-13

STD/HRC/IRC

14-36

(A) (W)

37-59

(AA) (WW)

60-85

(AAA) (ZZZ)

86-94

(86) (94)

95-99

(A-5) (A-1)

100-125

(100) (125)

(5A)

VHF 2-13

UHF

14-69

CABLE Mode Direct Channel Selection

When the Antenna/Cable menu option is in the Cable position, channels can be selected as follows:

Press the Direct Channel selection

buttons to select the channel.

Antenna Mode Direct Channel Selection

When the Antenna/Cable menu option is in the Antenna position, all channels

can be instantly selected by using

2-9: Press 2-9 as needed. Example, to select channel 2, press "2". 10-69: Press the 2 digits in order. If you select the channel more than 69,

the channel will not be change, it is no available.

1-9: Press 1-9 as needed. Example, to select channel 2, press "2". 10-99: Press the 2 digits in order. Example, to select channel 32, press "3" then "2". 100-125: Press the digital 1 button, the "1--" will appear on the screen, then press the 2 digits of remain in order.

1 Using CH +/- button

Using CH +/- button on the remote control, change the channel. Same operation is available with CH +/- button on the front panel

of the main unit.

digits button. For example:

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

NOTE:

In the DTV broadcasting, one channel sometimes broadcasts multiple programs depending on the air time. In this case, the main channel is called major channel and the sub channel is called minor channel.

Page 18

This section describes how to adjust the volume when viewing TV. The MUTE function, which is useful when you have a visitor or a phone call, will be also described.

1 Using VOL +/- button

You can adjust the audio volume with VOL +/- button on

the remote control.

The volume bar is displayed at the bottom of the screen

when adjusting the volume.

Same operation is available with VOL +/- on the front

panel of the main unit.

2 Using MUTE button

Press MUTE button on the remote control to mute the sound. The colored volume bar is displayed on the screen while muting.

To release the MUTE status, press MUTE button again or press VOL+ button. MUTE will displayed continuously When CC is OFF, MUTE will disappeared 5 seconds later When CC is ON.

SWITCHING AUDIO

This section describes how to switch the audio language in the digital mode.

2 Switch the audio language.

When you press SAP button on the remote control, the currently selected language and the number of received languages will be displayed on the screen.

Every time you press SAP button on the remote control,

the language will be switched.

Languages you can switch differ depending on the

receiving broadcast.

NOTE:

Pressing the SAP button works only with the some TV channels, and does not work with external equipment such as DVD players.

Volume adjustment

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

Page 19

You can display the currently selected channel number or other information such as the audio mode on the screen for checking.

In the analog mode, the currently selected channel number and the audio mode are displayed.

1 Display the channel number and the audio mode.

Press INFO button on the remote control. The currently selected channel number and the audio mode are displayed at the top right of the screen.

To clear the display, press INFO button again.

In the digital mode, the detailed information for the currently selected channel such as the program GUIDEe is displayed.

Display the detailed information for the channel. Every time you press INFO button, the display mode will be switched as below.

The following information is displayed in the INFO mode. (1) Program air time (2) Channel number (3) Closed caption (4) Channel title (5) Audio language (6) Program content

Screen information

AUTO

14.1

DTV-AIR

ENCODE 17:00-18:30

INFORMATION

America Masters

9.2

ENGLISH 1/3 CC

Satchmo: The Life of Lauis

Armstrong A self-taught

1 2 3

4 5 6

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

NOTES:

When the program guide is displayed in more than 6 lines, use VOL+/-

button and scroll for reading.

"No description provided" is displayed when the program guide is not

provided.

Page 20

Video menu

1 Press MENU button. The main menu screen will appear.

2 Press VOL+/- button to

select VIDEO Option, then press CH- button to enter.

3 Press CH+/- to select the desired option, then press

VOL+/- to adjust.

SETTING VIDEO

0101

CONTRAST 80 BRIGHTNESS 80 COLOR 50 SHARPNESS 50 TINT 0

VIDEO

Contrast

This will adjust the intensity of bright parts in the picture but keep the dark parts unchanged.

Brightness

This will adjust the light output of the complete picture, which will mainly affect the darker areas of the picture.

Color

This will adjust the saturation level of the colors to suit your personal preference.

Sharpness

This will adjust the sharpness of fine details in the picture.

Tint

Allows you to select the color mix (Tint) of the picture.

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

Page 21

Audio menu

1 Press MENU button. The main menu screen will appear.

2 Press VOL+/- button to

select AUDIO Option, then press CH- button to enter.

3 Press CH+/- to select

the desired option, then press VOL+/- to adjust.

SETTING AUDIO

0101

VOLUME 20

AUDIO

Volume

This will adjust the sound output level.

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

Page 22

Manual time setting

You must set the time manually for ON/OFF Timer.

After a power failure or disconnection of the power, the

time will get lost. In this case, reset the preset time.

NOTE:

EXAMPLE: Setting the time to "8:30 AM"

TO SET TIME

1 Press MENU. The main menu screen will appear.

2 Press VOL+/- button to

select TIME option, then press CH- button to enter the submenu.

3 Press CH+/- button to

select TIME, then press CH+/- button to select "--:--","AM"; press VOL+/- button to set the value & AM &PM.

4 Press MENU until the MENU screen disappears.

0101

TIME --:-- AM TIMER OFF --:-- AM TIMER ON --:-- AM

TIME

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

Page 23

Setting the ON/OFF timer

This feature allows you to have the TV automatically turn on/off at a

time. If you program

1 Press MENU. The main menu screen will appear.

SETTING THE TIMER ON

0101

TIME --:-- AM TIMER OFF --:-- AM TIMER ON --:-- AM

TIME

predetermined The ON/OFF TIMER, the TV will turn

on/off at the time your predetermined.

1 Press MENU. The main menu screen will appear.

SETTING THE TIMER OFF

0101

TIME --:-- AM TIMER OFF --:-- AM TIMER ON --:-- AM

TIME

2 Press VOL+/- button to

select TIME option, then press CH- button to enter the submenu.

3 Press CH+/- button to

select TIME ON, then press CH+/- button to select "--:--","AM"; press VOL+/- button to set the value.

4 Press MENU until the MENU screen disappears.

2 Press VOL+/- button to

select TIME option, then press CH- button to enter the submenu.

3 Press CH+/- button to

select TIME OFF, then press CH+/- button to select "--:--","AM"; press VOL+/- button to set the value.

4 Press MENU until the MENU screen disappears.

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

Page 24

0101

LANGUAGE ENGLISH BLUE SCREEN ON NTSC CAPTION C1 PARENTAL LOCK

FUNCTION

Function menu

SETTING THE NTSC CAPTION

1. Press the MENU button and then use VOL+/- button to select the

FUNCTION menu.

ress CH+/- button

to select NTSC CAPTION.

3.Then use VOL+/- button to

select caption:

You can also press CC button on the remote control to select the desired caption.

4. When you are satisfied with

your choice, press MENU button to return to the previous menu.

Press CH- button to enter,

then p

OFF,C1, C2,

C MUTE,TEXT1, TEXT2.

This allows you to configure the way you choose to view the captioning.

CAPTION The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired.

TEXT The term for the words that appear in a large black frame and almost cover the entire screen; usually messages provided by the broadcaster.

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

Page 25

TO REGISTER PASSWORD

An age limitation can be set to forbid children to see and hear violent scenes or pictures for adults, etc. The TV

Corresponds

to use theparental control function, you must register a password.

NOTES:

If you forget the password, you

cannot set the .Parent Control

1 Press MENU. The main menu screen will appear.

2 Press VOL+/- to select

FUNCTION, then press CH- to enter the submenu.

3 Press CH+ to select

PARENTAL LOCK, then press VOL+ to enter the submenu.

4 Enter the password (4

digits) using the number buttons(0-9). The TV is set up with the

initial password .0000

5 After inputting password

accurately, Press CH+/- to select the desired item.

To avoid forgetting the password, write it down and keep it in a safe place.

to "TV RATING" and "MOVIE RATING".

0101

LANGUAGE ENGLISH BLUE SCREEN ON NTSC CAPTION C1 PARENTAL LOCK

FUNCTION

PLEASE ENTER PASSWORD

0101

PARENTAL LOCK OFF PARENTAL GUIDEE MPAA RATING NO RATING UNBLOCK VIDEO UNBLOCK

PARENTAL LOCK

####

Function menu

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

Page 26

TO CHANGE PASSWORD

NOTES:

If you forget the password, you cannot set the Parent Control.

To avoid forgetting the password,

write it down and keep it in a safe place.

5 Enter the new password using

the number buttons (0-9).

7 Press MENU until the MENU screen disappears.

0101

LANGUAGE ENGLISH BLUE SCREEN ON NTSC CAPTION C1 PARENTAL LOCK

FUNCTION

PLEASE ENTER PASSWORD

0101

PARENTAL GUIDEE MPAA RATING NO RATING UNBLOCK VIDEO UNBLOCK CHANGE PASSWORD

PARENTAL LOCK

####

1 Press MENU. The main menu screen will appear.

2 Press VOL+/- to select

FUNCTION, then press CH- to enter the submenu.

3 Press CH+ to select

PARENTAL LOCK, then press VOL+ to enter the submenu.

4 Enter the password (4

digits) using the number buttons(0-9).

4 Press CH+ to select

CHANGE PASSWORD, then press VOL+ to enter the submenu.

ENTER A NEW PASSWORD

####

PLEASE INPUT AGAIN

####

6 Enter again the new password.

Function menu

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

Page 27

To use the TV after isParent Control

activated.

When the program applied to the Parental Control, setting is received, enter the password. When the password is entered correctly the protection will be temporarily overridden.

NOTE:

The Parental Control function is activated only on programs and tapes that support the rating.

1 Enter the PARENT CONTROL menu.

TO SET PARENTAL CONTROL ON/OFF

2 press CH+/- button to

select PARENTAL LOCK, press VOL+/- button to set ON or OFF.

When you are satisfied with your choice, press MENU button to return to the previous menu.

Ratings for Television programs including made-for-TV movies :

TV-Y (All children)

TV-Y7 (Children 7 years older) TV-G (General audience) TV-PG (Parental GUIDEance suggested) TV-14 (Parents strongly cautioned) TV-MA (Mature audience only)

TV Rating Children: ALL (Age) (applies to TV-Y, TV-Y7)

FV (Fantasy Violence) (applies to TV-Y7)

TV Rating General:

ALL (Age) (applies to TV-G, TV-PG, TV-14, TV-MA)

D (Dialogue - sexual dialogue) (applies to TV-PG, TV-14) L (Language - adult language) (applies to TV-PG, TV-14, TV-MA) S (Sex - sexual situations) (applies to TV-PG, TV-14, TV-MA) V (Violence) (applies to TV-PG, TV-14, TV-MA)

TO SET PARENTAL GUIDE

RATING

1 Enter the PARENT CONTROL menu.

2 press CH+/- button to

select PARENTAL GUIDE, press VOL+/- button to enter the submenu.

When you are satisfied with your choice, press MENU button to return to the previous menu.

0101

PARENTAL LOCK OFF PARENTAL GUIDE MPAA RATING NO RATING UNBLOCK VIDEO UNBLOCK

PARENTAL LOCK

0101

PARENTAL LOCK OFF PARENTAL GUIDE MPAA RATING NO RATING UNBLOCK VIDEO UNBLOCK

PARENTAL LOCK

3 press CH+/-/VOL+/- button

to set the desired ratings.

ALL FV D L S V TV-MA TV-14 TV-PG TV-G TV-Y7 TV-Y

( : BLOCK)

Function menu

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

Page 28

1 Enter the PARENT CONTROL menu.

TO SET THE MPAA RATING

2 Press CH+/- button to

select MPAA RATING, then press VOL+ button to enter the submenu.

3 Press CH+/- button to select

the desired rating.

MPAA-X MPAA-NC-17 MPAA-R MPAA-PG-13 MPAA-PG MPAA-G MPAA-NR

5 Press MENU until the MENU screen disappears.

Rating for Movies previously shown in theaters:

Movie Rating NR (Permits all programs)

G (General audience) PG (Parental GUIDEance suggested) PG-13 (Parents strongly cautioned) R (Restricted) NC-17 (No one 17 and under admitted) X (Adult only)

If you set PG-13 : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked.

4 Press VOL+/- button to select delete or .

0101

PARENTAL LOCK OFF PARENTAL GUIDE MPAA RATING NO RATING UNBLOCK VIDEO UNBLOCK

PARENTAL LOCK

( : BLOCK)

Function menu

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

MPAA RATING

Page 29

NOTES:

Captions: This closed caption mode will display text on the

screen in English or another language (depending on the setting of the closed captions). Generally, closed captions in English are transmitted on captions CC 1 and closed captions in other languages are transmitted on Captions CC 2.

Text: The text closed caption mode will usually fill the screen

with a programming schedule or other information. After selecting a closed caption mode, it will stay in effect until it is changed, even if the channel is changed. If the captions signal is lost due to a commercial or a break in the signal, the captions will reappear when the signal is received again. If the channels are changed, the captions will be delayed approximately 10 seconds. The captions will appear in places on the screen where they will least interfere with the picture, usually on the bottom of the screen. News programs will usually show three-line closed captions which scroll onto the screen. Most other shows provide two or three lined captions placed near the character who is speaking so the viewer can follow the dialogue. Words in italics or underlined describe titles, words in foreign languages or words requiring emphasis. Words that are sung usually appear enclosed by musical notes. For television programs broadcasting with closed captions, look in your TV GUIDE for the closed captions symbol (CC).

When selecting closed captions, the captioning will be delayed approximately 10 seconds. If no caption signal is received, no captions will appear, but the television will remain in the caption mode.

Misspellings or unusual characters may occasionally appear during closed captioning. This is normal with closed captioning, especially with live programs. This is because during live programs, captions are also entered live. These transmissions do not allow time for editing.

When captions are being displayed, on-screen displays, such as volume and mute may be hided. If the OSD

display appears, the closed caption will disappear, when the OSD disappear, the Closed Caption will appear again.

Some cable systems and copy protection systems may interfere with the closed captioned signal.

If using an indoor antenna or if TV reception is very poor, the closed caption decoder may not appear or may appear with strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.

Closed caption

WHAT IS CLOSED CAPTIONING?

This television has the capability to decode and display closed captioned television programs. Closed captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language.

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

Page 30

DTV setup menu

SETTING CLOSED CAPTION MODE

1 Press MENU. The main menu screen will appear.

2 Press VOL+/- button to

select DTV SETUP. then press CH- button to enter the submenu.

3 Press CH+/- button to

select DTV CC.

4 Press VOL+ button and

then press CH+/- button to select CAPTION MODE.

5 Press VOL+ button and

then press VOL+/- button to set the CLOSED CAPTION "OFF"or "ON".

6 Press CH+/- button to

select DTV CC and press VOL+/- button to set the desired service.

0101

DTVCC

DAYLIGHT SAVING OFF TIME ZONE ALASKA

ATSC PARENTAL LOCK

DTV SETUP

In DTV mode

0101

CAPTION MODE USER SETTING BROADCAST DTV CAPTION STYLE

DTV SETUP

0101

CLOSED CAPTION OFF DTV CC SERVICE1

DTV SETUP

When setting on, the DTV CC option will be available.

This allows you to configure the way you choose to view the digital captioning. Select one of the digital service channels made available by the caption provider. There are 6 standard services. Service 1 is designated as the Primary Caption Service. This service contains the verbatim, or near-verbatim captions for the primary language being spoken in the accompanying program audio. Service 2 is designated as the Secondary Language Service. This service contains captions in a secondary language which are translations of the captions in the primary Caption Service. The other service subchannels are not pre-assigned. It is up to the discretion of the individual caption provider to utilize the remaining service channels.

SETTING DTV CC

It only appears when the broadcasting signal bears.

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

Page 31

SETTING THE DTV CAPTION STYLE

1 Press MENU. The main menu screen will appear.

2 Press VOL+/- button to

select DTV SETUP. then press CH- button to enter the submenu.

0101

DTVCC

DAYLIGHT SAVING OFF TIME ZONE ALASKA

ATSC PARENTAL LOCK

DTV SETUP

0101

CAPTION MODE USER SETTING BROADCAST DTV CAPTION STYLE

DTV SETUP

SETTING THE CC USER SETTING

3 Press CH+/- button to

select DTV CC.

4 Press VOL+ button and

then press CH+/- button to select USER SETTING.

5 Press VOL+/- button to

set "BROADCAST"or "CUSTOM".

1 Press CH+/- button to

select DTV CAPTION

STYLE.

2 Press VOL+ button to

enter the submenu.

0101

CAPTION MODE USER SETTING BROADCAST DTV CAPTION STYLE

DTV SETUP

The DTV caption style function lets you change the caption

size and font style.

When "USER SETTING" is set to CUSTOM, you can set

the following items.

DTV setup menu

0101

STYLE STYLE2 SIZE LARGE TEXT COLOR WHITE TEXT OPACITY SOLID EDGE TYPE NONE

DTV SETUP

3 Press CH+/- button to

select the desired option.

4 Press VOL+/- button to

adjust the option.

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

Page 32

SETTING THE DTV CAPTION STYLE(continue)

Style

Select this option to select the font style of caption display according to your own preference. Press the VOL+/- button to select Style1, Style2, Style3,

Style4,Style5, Style6, Style7, Style8.

Size

Select this option to select the size of caption display according to your own preference. Press the VOL+/- button to select Small, Standard or Large ,

Text color

Select this option to select the text color or the opacity of the text box of caption display according to your own preference. Select a color and one of the opacity options.

Text Opacity: Specify the opacity for the text color.

BG (Background) Color: Select a background color.

BG (Background) Opacity: Select the opacity for the background color.

DTV setup menu

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

Page 33

Daylight saving time is automatically set by specially broadcasted signals. This menu item allows you to disable the automatic setting of daylight saving time. This is useful if you live in an area or state where daylight saving is not applied, but you receive channels from other areas where daylight saving signals are broadcasted.

SETTING THE DAYLIGHT SAVING

1 Press MENU. The main menu screen will appear.

2 Press VOL+/- button to

select DTV SETUP option, then press CH- button to enter.

3 Press CH+/- button to

select DAYLIGHT SAVING, then press VOL+/- button to select ON for automatic

clock correction for daylight saving time, based on specially broadcasted signals. Select OFF to disable automatic clock correction based on the specially broadcasted signals.

SETTING THE TIME ZONE

This function allows you to select your local time zone. Broadcasted time information will correct the clock display for your local time.

4 Press VOL+/- button to

select your viewing area time zone: NEWFOUNDLAND,

ATLANTIC, EASTERN, CENTRAL, MOUNTAIN, PACIFIC, ALASKA, HAWAII, or SAMOA

1 Press MENU. The main menu screen will appear.

2 Press VOL+/- button to

select DTV SETUP option, then press CH- button to enter.

3 Press CH+/- button to

select TIME ZONE option.

0101

DTVCC

DAYLIGHT SAVING OFF TIME ZONE ALASKA

ATSC PARENTAL LOCK

DTV SETUP

0101

DTVCC

DAYLIGHT SAVING OFF TIME ZONE ALASKA

ATSC PARENTAL LOCK

DTV SETUP

DTV setup menu

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

Page 34

SETTING ATSC PARENTAL LOCK

1 Press MENU. The main menu screen will appear.

2 Press CH+/- button to

select DTV SETUP. then press VOL- button to enter the submenu.

0101

DTVCC

DAYLIGHT SAVING OFF TIME ZONE ALASKA

ATSC PARENTAL LOCK

DTV SETUP

3 Press CH+/- button to

select ATSC PARENTAL LOCK.

4 Enter the password (4

digits) using the number buttons(0-9). The TV is set up with the

initial password 0000 and enter next submenu.

ENTER CODE ####

0101

VERSION [RRT0] DIMENSION CLEAR RRT

DTV SETUP

Version V-chip broadcast source version.

Dimension

Use when viewing non-TV broadcast programming.

Clear RRT

CLEAR Rating Table (RRT) information: This will clear V-Chip ratings table version.

DTV setup menu

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

Page 35

- This activates some, but not all, electronic program guides (EPG data) when it is used and transmitted by some DTV station providers. It is only supported when receiving DTV channels.

1. Press the GUIDE button to switch on GUIDE.

2. Press the CH+/- or VOL+/- button to select desired program, then press the OK button to display the selected program.

3. Press the GUIDE or EXIT button again to switch off GUIDE and return to TV viewing.

GUIDE 1/3 >>

03:00 ---04:00 Moving picture 480i 4:3

04:00 ---05:00 Moving picture 480i 4:3

You can create your own Favorite List. Use the

on on the remote control when a channel is highlighted and then you can add or delete the channel to/from the Favorite List.

FAV.LiST

butt

Press the FAV.LIST button open the favorite channel list, press CH+/- button to select the channel and press

button to confirm.OK

[ENTER KEY] ADD CURRENT CH TO SKIP ON

FAVORITE CHANNELS

14.3 ATSC-3

GUIDE

FAVORITE CHANNELS LIST

Other Functions

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

Page 36

Suppose the channel number you used

just now is 8 and the channel number you are using is 18 (as shown in the figure).

If you want to return to the last watched

program channel 8, you can simply press the Q.View button.

If you want to return to channel 18, press

the button again. Use this function, you can easily change between the channel you are using and the channel you used last time.

This function enables quick swap to the last watched program.

SLEEP TIMER

To set the TV to turn off after a preset amount of time, press SLEEP button repeatedly to select

the number of minutes. First the OFF option appears on the screen, followed by the following sleep timer options: (5 MINUTE,10 MINUTE, 15 MINUTE, 30 MINUTE,45 MINUTE, 60 MINUTE, 90 MINUTE,120 MINUTE, 180 MINUTE, 240MINUTE,OFF)

To confirm the sleep timer setting, p ress SLEEP and the remaining time will be displayed for a few seconds. To cancel the sleep timer, Press

repeatedly until the

display turns to OFF.

SLEEP OFF

PICTURE MODE

MILD

Every time press the P.MODE button to switch desired picture quality mode. Four kinds of picture modes (i.e., "MILD","STANDARD","VIVID" , "CUSTOM", ) can be selected in turn.

SLEEP

Other Functions

QUICKLY VIEW

POWER TV/DVD

OPEN/CLOSE

Q.VIEW INFO

MUTE

1 2 3 4

5 6 7 8

99 00

P.MODE

CH+

CH-

VOL

STOP

SETUP

PAUSE/STEP

REV

FWD .

D.MENU

REPEAT

A-B

PLAY/ENTER

SLOW

ANGLE

TITLE/PBC

AUDIO

CLR

D.CALL

TV/AV

PROGRAM

ZOOM

10+

VOL +

SUBTITLE

TV/DTV

SAP

SLEEP

CH.LIST FAV .LIST SIZ GUIDE

Page 37

DVD Features

Basic Playback

Preparations

1. Press OPEN/CLOSE to open the disc tray, place a disc in the disc tray. There are two different disc sizes. Place the disc in the correct GUIDE on the disc tray. If the disc is out of the GUIDE, it may damage the disc and cause the DVD player to malfunction. Do not place a disc which is unplayable in this DVD player.

2. Press OPEN/CLOSE to close the disc tray, the playback will automatically start.

3. Some discs may start playback with a menu. Use the cursor buttons on the remote control to select menu options and press PLAY/ENTER to start. You may also press the digit buttons to select a menu option directly. Many DVDs will not allow this during start-up.

1. Press PAUSE/STEP to pause playback (still mode). The sound will be muted during still mode.

2. Press PLAY/ENTER to resume normal playback.

Pause playback

1. Press STOP button to go to stop mode, the TV

screen will show the start logo. For some discs the player can recall the location where stopped, such as DVDs and audio CDs.

2. Press PLAY/ENTER to playback to resume play back from the location where playback is stopped or from the beginning of the disc.

3. Press STOP twice to stop completely.

Stop playback

Previous and Next

Fast forward and Fast reverse

1. Press FWD to fast forward through the disc.

Each time the FWD button is pressed, the fast forward motion speed changes.

2. Press PLAY/ENTER to resume normal playback.

3. Press REV to fast reverse through the disc.

Each time the REV button is pressed, the fast reverse motion speed changes.

4. Press PLAY/ENTER to resume normal playback.

Basic playback

1. When paused, press PAUSE/STEP continuous

to single step forward to the next frame in the video.

2. Press PLAY/ENTER to resume normal playback.

Single step playback

Some discs do not start automatically. Press PLAY/ENTER to start playback.

During Playing, pressing the PREV key will restart the current chapter and skip chapters backwards with each subsequent press until the start of the disc is reached. Each press of NEXT key during playing will skip the current chapter and play the next one.

Preparations

Press the DVD/TV button on the remote control or the TV to enter the DVD status.

Pause playback

Stop playback

Previous and Next

Fast forward and Fast reverse

Basic playback

Single step playback

Page 38

Advanced PlaybackAdvanced Playback

PROGRAM

When playing discs, press "PROGRAM" to enter program mode. Press the digit buttons to select the program number that you want. When finished move the cursor to select "START" . This will start the program playback.

REPEAT

Press " REPEAT " and Chapter repeat will be displayed on screen, the second press will display Title repeat, the third press will display All repeat, the fourth press will cancel this function.

CAPTION

Press "SUBTITLE ", the screen will display "SUBTITLE 01/XX XXXXX", "01" indicates the original number of this language; "XX" indicates total number of language; "XXXXXX" indicates the language of country. (the number of language depends on disc). This function can select up to 32 languages displayed on screen.

A-B

Press " A-B " to begin start-point, press again to set an end point and complete setting. The selected section A-B will be repeated. The third press will cancel this function.

SLOW

D.MENU

Press this key to display root menu,select item according to your preference. (This function will work with a DVD having a multi-layer menu.)

ANGLE

When enjoying sports, concert or theatre, press this key to watch same actions in different angles. (Valid for discs possessing this function. Using a disc recorded in multi-angle you can view the scene from different angles,for example,front, side, whole view and exterior scene).

Press this key can change the mode of audio. such as: Audio 1/2: AC 3 2 CH English Audio 2/2: AC 3 5.1 CH English Press this button to cycle between Mono Left, Mono Right, Mix-Mono and Stereo.

AUDIO

TITLE/PBC

With some DVD discs pressing this key will display the title menu. You can then use the digit buttons to select the item you prefer.

D.CALL

Advanced Playback

PROGRAM

REPEAT

SUBTITLE

A-B

Press " A-B " to begin start-point, press again to set an end point and complete setting. The selected section A-B will be repeated. The third press will cancel this function.

Press "SEARCH" once to display the search menu. Press the button again to select. Press the program number buttons to input the item you require. Press PLAY/ENTER to confirm.

SLOW

Press SLOW to play a disc in slow forward. Each time the SLOW button is pressed, the slow motion speed changes. Press PLAY/ENTER to resume normal playback;

Note: This function does not work for CD and MP3.

D.MENU

ANGLE

AUDIO

TITLE/PBC

Pressing this key will cycle through "Title Elapsed", "Title Remain", "Chapter Elapsed", "Chapter Remain" and "Display off ".

D.CALL

DVD Features(Continued)

All described functions are for DVD discs. If you play other format discs, the operation and on screen display will be different.

IMPORTANT NOTE:

Note: When press this button continuously, you must above 3 seconds interval.

Page 39

Special Playback Functions

JPEG DISC PLAYBACK

MP3 PLAYBACK

SCREEN SAVER FUNCTION

When playing an MP3 disc, a navigation menu will be displayed automatically. In the menu, use UP or DOWN cursor buttons to choose the folder, then press PLAY/ENTER to enter the folder. Use the UP and DOWN cursor buttons to select the file and press PLAY/ENTER. Pressing the LEFT cursor button will take you to the previous screen/menu.

This unit employs a screen saver mode to help protect the tube during static video pictures. This can be turned off on the GENERAL SETUP PAGE.

When a disc containing standard JPEG picture files is inserted into the player, a navigation menu will be displayed automatically. Use the UP and DOWN cursor buttons to select a file then press PLAY/ENTER. The slide show will commence. Press PREVIOUS or NEXT to move between pictures. Press pause to stop on the current picture. Press PLAY/ENTER to resume normal playing.

A JPEG disc contains JPEG (.jpg) format picture information that can be decoded by a micro-computer software and displayed through the video output interface or on the television screen. This function has many applications. For example one can save files from a scanner or digital camera in the JPEG format, record these on a CD-R disc and present them to an audience through this player. The JPEG format is a convenient method to store images in a small amount of memory space, and is ideal for archiving information.

Page 40

DVD System Setup

General Setup Process

1.Press the SETUP button, the General Setup Page,Preference Page will be displayed in turn.

2.Press CH+/- b to select, the item, then press to enter the submenu.

3.Press CH+/- bu to select then press PLAY/ENTER to confirm.

4.Press EXIT key or press SETUP repeatedly to exit the set-up menus.

..General Setup Page..

TV Display LB Angle Mark On OSD Lang ENG Spdif Output Caption On Screen Saver Off

4 3:Ps 4 3:Lb 16 9

Parental

Password

Default

..Preference Page..

General Setup Page

When using the DVD with the internal TV, select 4 3/LB.

The following information applies only when the DVD output is connected to an external TV.

4:3/PS (PS = Pan and Scan) You may select if you have a normal aspect ratio (4:3) TV, although the NORMAL/LB (letter box) is a more common choice. In PS mode, widescreen material will fill the screen, but at the expense of chopping off extreme left and right edges of the original film picture. For this feature to work, the disc must be specially coded. Such discs are uncommon. 4:3/LB (LB = Letter Box) You may select this if you have a normal aspect ratio (4:3) TV. Widescreen material will be shown in pure unaltered form, allowing the entire picture area of the original film to be viewed without any side cropping. Black bars will appear above and below the picture. 16:9 You may select this if you have a widescreen (16:9) TV. Back bars may still appear above and below the picture even if using a widescreen TV. This is because some film directors prefer to use ultra widescreen aspect ratios e.g.

2.35:1. This will normally be indicated on the DVD packaging.

ASPECT RATIO DESCRIPTION

..General Setup Page..

TV Display LB Angle Mark On OSD Lang ENG Spdif Output Caption On Screen Saver Off

4 3:Ps 4 3:Lb 16 9

1 Kid Saf 2 G 3 Pg 4 Pg 13 5 Pgr 6 R 7 Nc17 8 Adult

SETUP

PLAY/ENTER

SETUP

PLAY/ENTER

Page 41

DVD System Setup(Continued)

DVD System Setup

General Setup Page

CAPTIONS: This function allows you to display or

hide the caption.

SCREEN SAVER: If the screen saver is on, then there will be an animated picture of DVD on the screen whenever the DVD player is idle for more than 3 minutes .

..General Setup Page..

Angle Mark On

OSD Lang ENG

Spdif Output

Caption On

Screen Saver Off

Spdif Off

Spdif / Raw

Spdif / Pcm

SPDlF OUTPUT MODE: Coaxial audio output modes when connecting to external audio equipment.

This DVD player includes three kinds of audio output:

1. SPDlF OFF: An analog surround sound format is output through the back-paneI connections for 2-CH audio out or

5.1 CH audio out.

2. SPDlF/RAW or SPDIF/PCM: This mode allows a coaxial

output cable to be connected to external equipment containing various audio processors that decode various synthesized and discrete audio information for greater effects.

TV Display LB

..General Setup Page..

Angle Mark On

OSD Lang ENG

Spdif Output

Captions On

Screen Saver Off

Off

TV Display LB

This item allows you to set Angle Mark ON or OFF.

ANGLE MARK: Users can select a particular camera angle when playing a DVD which offers multiple angles.

On Screen Display (OSD) Language: Users can select on-screen display language.

..General Setup Page..

TV Display LB Angle Mark On OSD Lang ENG Spdif Output Captions On Screen Saver Off

On Off

..General Setup Page..

TV Display LB Angle Mark On OSD Lang ENG Spdif Output Caption On Screen Saver Off

English

Spanish

..General Setup Page..

Angle Mark On

OSD Lang ENG

Spdif Output

Caption On

Screen Saver Off

Off

TV Display LB

Page 42

DVD System Setup(Continued)

DVD System Setup

The Preference Page is only available when there is no disc in the player. These settings are applied consistently to all discs which are inserted and played.

Preference Page

PARENTAL: The parental

control function works in conjunction with the different censorship classes assigned to DVDs. These classes help to control the types of DVDs that the family watches, There are up to 8 censorship classes for DVDs.

Note: 1 To change this setting you must enter your password.

(Initial password is 0000) 2 When set to OFF, all discs may be viewed.

..Preference Page..

Parental

Password Change

Default

Old Password

New Password

Confirm PWD

PASSWORD CHANGE:

You can change your password by entering 4 digits. You must confirm the 4 digits before the new password can be accepted.

..Preference Page..

Parental

Password

Default

1 Kid Saf 2 G 3 Pg 4 Pg 13 5 Pgr 6 R 7 Nc17 8 Adult

SETUP

PLAY/ENTER

SETUP

PLAY/ENTER

NOTE:If you forget your password or a password is accidentally set enter 2881 as the password. This will enable you to regain control.

Page 43

DVD System Setup(Continued)

DVD System Setup

DEFAULT: Resets all settings

(except password and parental lock status) for this DVD player back to the manufacturers original settings. Press ENTER to perform the reset.

Note:

Some functions may not be available depending on the type of disc.

Parental

Password

Default

..Preference Page..

Reset

SETUP

PLAY/ENTER

Page 44

The following discs can be played:

Playable Discs

You cannot play discs other than those listed above. You cannot play non-standardized discs, even if they may be labelled as above. The performance of CD-R or CD-RW disc depends on the way the disc was burned. In a few cases, their performance may not be consistant or may not even operate at all.

This DVD Player is designed and manufactured according to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD Player, this DVD player will not play that disc.

This Region number of this DVD Player is .

Page 45

Disc Protection and DVD Characteristics

Compare DVD disc with other discs:

DVD LD

SVCD

VCD CD

Encode method

Digital/MPEG

Analog

Digital

Digital/

MPEG

Digital

Capacity

650MB 650MB 650MB

133 minutes

242 minutes

266 minutes

484 minutes

Playing Time

Single-side 60 minutes double-side

120 minutes

45 minutes

74 minutes 74 minutes

12cm/8cm 12cm/8cm

Disc diameter

30cm/20cm

12cm 12cm

Horizontal resolution

More than 500 line

No more than

430 line

No more than

350 line

No more than

250 line

Multiple kinds

Picture proportion

One kind

Subtitle

32 kinds

16 kinds at most

4 kinds at most

4 kinds

2 kinds 2 kinds

Language

8 kinds

Sound quality

48KHz, 96KHz/

6, 20, 24bit

44.1KHz/ 16bit

Singleside singlelayer

4.7G

Double

-side single

-layer

8.5G

Singleside doublelayer

9.4G

Doubleside doublelayer 17G

Page 46

Troubleshooting guide

To assist in location possible faults use help guide below.

BREAKDOWN PHENOMENON

PICTURE

SOUND

CHECKING

The aerial direction and connection

Ensure that the power supply is connected to the TV set and turned on. Also ensure that the TV set is not in "Listen Mode" or that the brightness and contrast are not turned down.

Adjust color control

Adjust channel again

Color Purity is a fault that can be caused by moving the TV set, placing magnets near the TV screen or turning on/off house hold appliances such as vacuum cleaners near the TV set. Turn the TV off with the main power switch for 15 minutes. When the power is turned on again the TV set will automatically degauss the picture. In severe cases leave the TV set turned off over night.

Picture with snow

Noise

Color Spot

Normal volume

Scramble

Normal or Weak Volume

No color Normal volume

No Picture No sound

No soundNormal

Normal

Disturb

Noise

Double or Triple Image

Note:

1.If the fault can not be corrected using the above guide consult with your local authorized service center.

2.The TV set must only be repaired by a qualified registered service person. Never attempt to remove the back cover as TV set has dangerous voltages inside that may cause a fatality or fire.

3. The cabinet may produce the occasional "snapping sound" This is normal and caused by the materials in the cabinet expanding with room temperature changes.

Electrical interference which can be caused by cars, motorbikes etc, Fluorescent lamps and dirty insulators on overhead power cables.

This is called "ghosting" and can be minimized with an outside aerial, and good quality cable and terminations. Altering the aerial direction can also minimize this effect.

Volume Sound mute

Page 47

Specifications

The specifications offered you here are for reference only. With product improvement there may be some differences between the description and the final product.

NOTE

Design and specifications are subject to change without notice. Dimensions quoted in this manual are approximate.

368.8 mm x 378.6 mm x 378.8mm

ATSC

CV1311 CV2011

499.4 mm x 483.5 mm x 481.7mm

The registered logos shown in this manual, such as those on the page showing playable discs contents, are those of the license holders and the associated trademarks holders. They are shown for informational purposes only and do not indicate content or capability in all software, nor with all hardware.

Page 48

Page 49

0090500359 Ver.1.0

Prima CV1311, CV2011 Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual