Adjustable Front Anti-Tips
Manual, height adjustable anti-tips are now standard on all Jazzy models equipped
with Active Trac Suspension. For those clients who routinely traverse very rough
or uneven terrain, this design enhancement allows their Jazzy’s front anti-tips to
be raised to more smoothly negotiate the extreme surface transitions. For those
clients who require maximum stability, their Jazzy’s front anti-tips can be lowered
as close to the ground as their environment allows. Consider the following points
with regard to the Jazzy’s manual, height adjustable anti-tips:
.
The adjustable front anti-tips allow the client, provider and/or therapist to
customize the performance of the Jazzy to the client’s individual needs.
.
The design allows for a range of adjustment of our patented, resilient front
anti-tip wheels from the floor to 2” off the ground.
.
Lowering of the front anti-tips provides maximum stability while continuing
to offer strong obstacle climbing capability.
.
Raising of the front anti-tips, on those Jazzys operated by more active,
adventurous clients, increases the climbing and obstacle negotiating capability.
Optimizing the Performance
of the Jazzy
®
Power Chair
1-800-800-8586
182 Susquehanna Avenue, Exeter, PA 18643
www.pridemobility.com
Front anti-tip wheel shown in lowered, normal and raised positions
JZOPT-8-23-04
Optimizing the Performance
of the Jazzy® Power Chair
The Jazzy Power Chair is designed to provide superior rider control, balance,
maneuverability & comfort. Incorporating patented mid-wheel drive design,
sophisticated programmable electronics, and interchangeable seating systems,
the Jazzy is designed to accommodate all your clients’ needs. To maximize the
benefits of all of these features, it is important that the following considerations
are taken into account when ordering, fitting & providing a Jazzy Power Chair.
Choosing the Proper Jazzy Model
Pride Mobility Products offers many Jazzy Power Chair models to serve various
needs. The Jazzy Power Chair lineup offers true “end to end” power chair solutions.
It is important when evaluating a client’s power chair mobility needs, the following
be considered with regard to the client:
.
Physical Abilities
.
Size & Weight
.
Environmental Issues
.
Lifestyle (Will the client’s Jazzy be used primarily indoors or outdoors?)
Seating
An important consideration when fitting & ordering a Jazzy Power Chair is deciding
what seating is best suited to your client’s needs. The Jazzy has a full array of
interchangeable seating systems to meet a client’s short and long term needs.
Providing the proper seating & positioning will maximize the Jazzy’s mid-wheel
drive performance while improper seating can diminish the Jazzy’s unique
performance characteristics.
Items to be considered, with regard to the client, when choosing a seating system
for the Jazzy Power Chair:
.
Positioning Needs (seat height & seat angle)
.
Weight (hip measurement determines seat width)
.
Height (determines seat depth and back seat height)
.
Pressure Management Needs
Seat Depth
Using proper seat depth will help to better distribute weight on the Jazzy
Power Chair base. Ultimately, one should achieve a balance of 82% of the
rider’s weight over the drive wheels.
Seat Angle
All Jazzy seating systems, attached via four tower posts, offer adjustable seat angles
through the manipulation of the height of the front and rear towers. This provides
proper seat angle to assist the user to sit farther back in the seat for proper center
of gravity over the power base, as well as proper seat position.
Programmability
All Jazzy Power Chairs offer fully programmable electronics. By adjusting the
parameters of these electronics, one can improve the chair’s overall performance
and safety. For example, if, after providing the proper seating and adjusting the seat
for correct centering on the Jazzy power base, one is still experiencing a forward
pitching, this effect can be eliminated by adjusting the deceleration (or braking) to
a lower level. This will slightly increase the stopping distance, but will offset the
inertia of the client’s forward motion.
All Jazzy Power Chairs are sent out with pre-programmed factory settings. These
settings, however, may and should be adjusted depending on the client’s abilities and
the environmental surroundings in which the Jazzy will be operated. This will ensure
the client’s safety and the optimal performance of the Jazzy Power Chair. The
following guide has been established to assist you in the programming process.
Important Issues Regarding Jazzy Power
Chair Base Performance and Stability
A common misconception of mid-wheel drive Power Chairs is that any “pitching
forward” should be considered acceptable. Some mid-wheel drive Power Chair
designs have, what their designers consider to be, acceptable levels of instability
in pitching forward (i.e.: Teeter-Totter Effect). Pride Mobility Products has gone to
great lengths in its design process to virtually eliminate this effect. By taking into
account the proper model, seating sizes, seat adjustments, seating angles and
programmability, one can eliminate any pitching forward perception or effect.
Note: It is not normal for your Jazzy Power Chair to pitch forward. If your
client experiences this effect during normal operation, you need to check
and ensure the following:
1. Proper adjustment to the center of gravity—
seat position in relation to the power base.
2. Use of proper seat depth.
3. Correct programming of the electronics to best match
the environmental conditions and the client’s abilities.
Rule of Thumb: Femur length should not exceed 2”-3” overhang on seat base.
Proper Depth Improper Depth Improper Depth
Center of Gravity Adjustment
All Jazzy models are capable of adjustment to the seating system in relation to
the power base. If forward pitching occurs, it is important to adjust the seating
system back on the power base. This changes the center of gravity and will
help to eliminate a pitching forward effect.
Forward Speed: Allows you to adjust the top speed of the Jazzy.
The speed is set at 100% at the factory.
Factory Setting: Setting Changed to:
Forward Acceleration: Allows you to adjust how quickly the Jazzy will
achieve maximum forward speed when the joystick is pushed forward.
Factory Setting: Setting Changed to:
Forward Deceleration: Allows you to adjust how quickly the Jazzy will stop
its forward motion when the joystick is released.
Factory Setting: Setting Changed to:
Reverse Speed: Allows you to adjust the maximum reverse speed of the
Jazzy. If forward speed is set at 100%, the reverse speed will be 60%.
Factory Setting: Setting Changed to:
Maximum Turn Speed: Allows you to adjust the maximum turning speed
of the Jazzy.
Factory Setting: Setting Changed to:
Turn Acceleration: Allows you to adjust how quickly the Jazzy will achieve
maximum turning speed when the joystick is pushed to the left or right.
Factory Setting: Setting Changed to:
Turn Deceleration: Allows you to adjust how quickly the Jazzy will stop
when the joystick is released from a left or right position.
Rearward PositionNormal Position Forward Position
Factory Setting: Setting Changed to: