Pribusin IUC-7X-SLX Instruction Manual

Manufacturers of Process

Controls and Instrumentation

Instruction Manual

Model:

IUC-7X-SLX

Function: Isolated Slidewire Transmitter

Input:

Output:

Power:

X=1: 0-100 Ohm
X=2: 0-500 Ohm
X=3: 0-1 K Ohm

X=7:

X=1: 1-5 mA
X=2: 4-20mA
X=3: 0-1 mA

X=7:

117 VAC, 60 Hz, 6 VA

X=4: 0-2K Ohm
X=5: 0-5K Ohm

X=6: 0-10K Ohm

X=4: 10-50 mA
X=5: 1-5 VDC

X=6: 0-10 VDC

Serial #:

For Technical Assistance And Questions Call

USA: [phone] CANADA: [phone]

24 VDC, 160 mA

(If special or required)

Restocking Policy

All product returned to Pribusin Inc. in prime condition (not
damaged, scratched or defaced in any way) within seven (7)
months from the original date of shipment is subject to a 50%
restocking charge. All product must be accompanied by a
Return Authorization number (RA number) which must be
obtained from Pribusin Inc. prior to returning any product.

After seven (7) months from the original date of shipment,
products cannot be returned for restocking.

Custom designed products, modified products or all non­standard products may not be returned for restocking.

Warranty Policy

Pribusin Inc. warrants equipment of its own manufacture to be
free from defects in material and workmanship, under normal
conditions of use and service, and will replace any component
found to be defective, on its return to Pribusin Inc.,
transportation charges prepaid, within one year of its original
purchase. Pribusin Inc. will extend the same warranty
protection on equipment, peripherals and accessories which is
extended to Pribusin Inc. by the original manufacturer. Pribusin
Inc. also assumes noliability, expressed or implied, beyond its
obligation to prelace any component involved. Such warranty
is in lieu of all other warranties, expressed or implied.

Page v

Manufacturers of Process

Controls and Instrumentation

Model: IUC-7X-SLX

Isolated Slidewire Transmitter

Standard Features:

High Input-Output-Power Isolation (1500VAC Test)

Standard Slidewire Inputs (see back)

Industry Standard Output: 4-20 mA, 1-5 VDC, more
(see back)

Special Input Ranges Available

High Output Drive on Current Outputs

Easy Field Calibration

Two Wire Supply Option for Two Wire Transmitters

Power: 117 VAC 50/60 Hz (Optional 24 VDC)

High Noise Rejection

CSA and NRTL Approved (LR 51078)

NRTL/C

Function:

The IUC-7X-SLX is an isolated slidewire transmitter
that provides high isolation and rugged design for many
control applications. Three-way isolation is provided
between the input, the output and the power. The
signal isolation takes place through state-of-the-art
optical isolators to ensure high accuracy and
repeatability. Special output drive circuitry allows the
IUC-7X-SLX to drive loads of up to 1600 Ohms which
makes it ideal for driving multi instrument loops.

Several standard slidewire ranges are available and
special ranges are available upon consultation with the
factory or your representative.

R

Calibration:

Calibration is via easily accessible multi-turn
potentiometers.. All instruments are shipped fully
calibrated and tested, but can easily be field adjusted.
A Zero and Span pot are available on all units to adjust
the output signal.

Specifications:

Isolation: Input to Output to Power 1500 VAC (test)
Accuracy/Linearity:+/- 0.1% max., +/- 0.05% typ.
Operating Temperature: -40 Deg.C. to +50 Deg.C.
Temperature Effects: +/-0.5% max., +/-0.2% typ.

(for 40 Deg.C. change)
Output Ripple: less than 0.1% p-p value
Common Mode Rejection: 120 dB @ 60 Hz
Loop Drive: Max. 1600 Ohms at 20 mA

Page A17

IUC-7X-SLX

Enclosures & Dimensions:

Standard Metal Enclosure NEMA 4X Option

Connection:

Shown here for
4-20mA Output

Conduit Cover Option
for Metal Enclosure

Model Designation:

IUC

-7X-SLX

Output

1: 1-5 mA (4000 Ohm Drive)
2: 4-20 mA (1000 Ohm Drive)
3: 0-1 mA (20000 Ohm Drive)
4: 10-50 mA (250 Ohm Drive)
5: 1-5 VDC (Zout=250 Ohm)
6: 0-10 VDC (Zout=500 Ohm)
7: Special Output

Example:

If no options specified, unit is 117 VAC Power in metal enclosure

Options:

Slidewire transmitter with 1K Ohm Slidewire and
4-20 mA Output in standard metal enclosure and
117VAC Power is designated by: IUC-72-SL3

(Add letters to end of Model Number)

Input

1: 100 Ohm
2: 500 Ohm
3: 1K Ohm
4: 2K Ohm
5: 5K Ohm
6: 10K Ohm
7: Special Input

Manufactured By:

USA:

USA:

Pribusin Inc.
743 Marquette Ave.

www.pribusin.com

www.pribusin.com
[e-mail]

[e-mail]

Page A17

Muskegon, MI 49442
Ph: [phone]
Fx: [phone]

A - 24 VDC Prime Power
B - 240 VAC Prime Power (not CSA approved)
T - 200 mA Two Wire Supply (24 VDC unreg.)
C - Conduit Cover for Metal Enclosure (see above)
N - NEMA 4X enclosure (see above)

CANADA:

Pribusin Inc.
101 Freshway Dr. Unit 57
Concord, Ontario, L4K 1R9
Ph: [phone]
Fx: [phone]

Rev.A Subject to change without notice