Presto Saladshooter User Manual
SaladShooter electric slicer/shredder
Visit us on the web at www.GoPresto.com
• Slices or shreds fruits and vegetables. Shred
cheese for tacos, pizza and more.
• Just point and shoot right where you want.
• Cleanup is easy. Stores anywhere.
INSTRUCTIONS
Estas instrucciones están disponibles en
español. Para obtener una copia impresa:
• Descargue en formato PDF en
www.GoPresto.com/español.
• Envíe un correo electrónico a
contact@GoPresto.com.
• Llame al 1-800-877-0441, oprima
2016 National Presto Industries, Inc.
This is a Listed appliance. The following important safeguards are recommended by most portable appliance manufacturers.
IMPORTANT SAFEGUARDS
To reduce the risk of personal injury or property damage when using electrical appliances, basic safety precautions should always be
followed, including the following:
1. Read all instructions before using the slicer/shredder.
2. To protect against the risk of electrical shock, never put the motorized base, cord, or plug in water or other liquids.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
5. Do not operate any appliance with a damaged cord or plug or in the event the appliance malfunctions or is dropped or damaged
in any manner. Return the appliance to the Presto Factory Service Department for examination, repair, or electrical or mechanical
adjustment.
6. The use of attachments not recommended or sold by the appliance manufacturer may cause fire, electric shock, or injury. Use only
genuine Presto replacement parts.
7. Do not use outdoors.
8. Do not let cord hang over edge of table or counter or touch hot surfaces.
9. Avoid contact with moving parts.
10. Never feed the food through the food chamber with your hands; always use the food guide.
11. Keep fingers out of the slicing/shredding chute.
12. The metal portions of the slicing and shredding cones are sharp. Handle with care.
13. Do not use the slicer/shredder for other than intended use.
2 y deje un mensaje.
SAVE THESE INSTRUCTIONS
THIS PRODUCT IS FOR HOUSEHOLD USE ONLY.
Important Cord and Plug Information
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit
into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to modify the plug in any way. Connect the power supply cord to a 120VAC electrical outlet only.
WARNING! FOR CALIFORNIA RESIDENTS
State of California Proposition 65 requires that we include the following warning:
This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Getting Acquainted
Before using your Presto SaladShooter electric
slicer/shredder, study the diagram to the right to become familiar with the various parts of the unit and
read the instructions carefully.
Food chamber assembly
Food chamber
Motorized base
Fingertip
power
switch
Before initial use, and after each subsequent use, wash
all parts except the motorized base in warm, sudsy
water. Wipe the motorized base with a damp cloth to
clean. Never immerse the motorized base in water
or any other liquid.
Slicing/
shredding chute
Driving end
How To Use
1. Select either the slicing or the shredding cone and
insert it narrow end first (Fig. A) into the slicing/
shredding chute.
Then attach the twist-lock ring to the slicing/
shredding chute by turning it clockwise until it
locks into place (Fig. B).
CAUTION! The metal portions of the slicing and
shredding cones are sharp. Handle with care.
2. Attach the food chamber assembly to the motor-
Shredding
cone
Slicing cone
Twist-lock ring
ized base by inserting the portion containing the
driving end of the slicing or shredding cone
into the socket of the motorized base (Fig. C).
Then rotate the food chamber assembly clock-
Fig. A
Food
chamber
Fig. B
Food
chamber
wise until it is upright and centered with the
handle. To be sure the food chamber assembly
is attached properly, check to see that the
interlock bracket (Fig. D) is positioned in the
bracket slot (Fig. E).
Slicing/
shredding chute
Twist-lock
ring
Bracket slot
Proper assembly is important. This unit is
designed with safety in mind. The food chamber assembly cannot be removed
Fig. D
Fig. E
from the base unless the power switch is in the OFF position.
Likewise, the motor will not turn on unless the assembly is attached to the
Bracket
slot
unit. The motor stops automatically if an incorrectly attached assembly slips
off the base during operation.
Should the motor stop in the middle of operation, turn the switch to the OFF
position. Reassemble, making sure the interlock bracket on the bottom of
the slicing/shredding chute is positioned in the bracket slot on the motorized
Interlock
bracket
base before using the unit again.
3. For best slicing and shredding results, it is important that the food be prepared properly and placed in the food chamber as follows:
• Cut food so that it will fit easily and loosely into the food chamber. Food that does not fit loosely in the food chamber may become
wedged in the food chamber and therefore will not discharge properly. If food is too large to fit loosely in the food chamber, cut
it into smaller pieces.
2
Food guide
Fig. C
Driving
end
Socket
Loading...