Page 1
I
bakes, makes casseroles and
1.
2.
3.
4.
5.
6.
7.
8.
9.
be pulled on by children or tripped over.
Page 2
heat
heat control into the skillet so the two electrical pins on the skillet are fully inserted into the heat
heat control to desired temperature (see page 3 for cooking temperatures). Remove cover and preheat skillet.
preference and particular food being cooked. During cooking, pilot light will go on and off indicating desired temperature is being
Soaking for more than two hours may damage the nonstick nish.
destainer**. These cleaners are available at most grocery and hardware stores. For best results,
before using. The outside nish of the skillet is easy to keep attractive and looking new. Simply wipe away spills and drips as they
To ensure continued accuracy of the Control Master
heat control, avoid rough handling in use and storage.
Page 3
300° - 325°
8-10
275° - 300°
325° - 350°
25-40
250° - 275°
3-5
250° - 275°
325° - 375°
300° - 325°
⁄
˝ thick
325° - 350°
⁄
˝ thick
⁄
˝ thick
325° - 375°
8-12
325° - 350°
5-10
375° - 400°
4-5
⁄
˝ thick
325° - 375°
15-20
⁄
˝ thick
325° - 375°
20-25
300° - 350°
10-12
300° - 325°
20-30
precooked
325° - 350°
10-12
300° - 325°
5-10
350° - 400°
6-7
350° - 400°
10-12
⁄
˝ thick
350° - 400°
8-10
350° - 400°
18-20
5-10
Warm - 225°
Warm
Page 4
appliance or need parts for your appliance, call our Consumer Service
parts. Genuine PRESTO
replacement parts are manufactured to the same exacting quality standards as
appliances and are engineered speci cally to function properly with its appliances. Presto can only guarantee the quality
parts. “Look-alikes” might not be of the same quality or function in the same manner. To ensure
replacement parts, look for the PRESTO
trademark.
Presto Limited Warranty
appliance is designed and built to provide many years of satisfactory performance under normal house-
appliance, shipping prepaid, to the Factory Service Department
We want you to obtain maximum enjoyment from using this PRESTO
appliance and ask that you read and follow the in-
Loading...