How it Works
Presto
Loading...
26amp 3b forte ht highly dynamic temperature
Control
46 pgs10.15 Mb0

Presto 26amp 3b forte ht highly dynamic temperature Control

Download
New Models 2023
Highly Dynamic Temperature Control Systems
& FORTE HT
ENGLISH
The Thermal Bath Fluids
ENGLISH
BEST PERFORMANCE IN HIGHLY DYNAMIC TEMPERATURE CONTROL SYSTEMS
HIGHLIGHTS
- Ideal for highly precise, external temperature control tasks from -93 °C to +250 °C
- Wide working temperature ranges using one thermal fluid
- Rapid heating and cooling
- Powerful circulation pumps, electronically adjustable in stages or by setting the pressure value
The PRESTO principle
Expansion vessel (1)
Heat exchanger: Heating section (2) Refrigeration section (3)
Circulation pump (4)
˚C
+200
+150
+100
+50
0
-50
A41, W41 A38 A30
A40, W40
30 60 90
Flexible set up
min
+200
+150
+100
-100
+50
-50
0
A38_____
A41, W41
__A30
__A40, W40
40 80
min0
2
Space saving design
JULABO PRESTO are the only highly dynamic temperature control systems with closed side panels without ventilation slits. Save space by placing PRESTO units directly next to each other or your application.
COMFORT
SAFETY
- Side panels without ventilation slits
- Important interfaces directly accessible from the front
- Easy to transport
- Hydraulically sealed to prevent unpleasant vapors and odors
PERFORMANCE
- Rapid heating and cooling
- Heating capacity up to 36 kW
- Cooling capacity up to 33 kW
- Wide temperature ranges covered with only one thermal fluid
- Powerful, magnetically coupled pumps (free of seals and leak free)
- Actively cooled expansion vessel compensates for temperature-induced vo­lume changes in the heat exchanger
- Simple and safe filling procedure
- Hot or cold thermal bath fluid does not come into contact with oxygen
- Three user levels with password protection
PROCESS SAFETY
- Fully automated degassing procedure
- eproducible results
- Maximum uptime
- Electronically adjustable pumps in stages or by setting the pressure value (except A30)
COST EFFICIENCY
- Less thermal bath fluid needed compared to open bath circulators
- Smaller footprint
3
THE PERFECT TEMPERATURE CONTROL SOLUTION
PRESTO for extremely wide temperature ranges
PRESTO is the perfect solution if you need to cover wide working temperature ranges. The PRESTO are designed to work in wide temperature ranges with one and the same thermal fluid. Forget about frequently changing the bath fluid and reduce your stock.
Filling is made easy: The filling funnel can be easily accessed from the top of the PRESTO allowing safe and easy filling.
PRESTO systems are closed
The closed system design of the PRESTO prevents the hot or cold thermal fluid from getting in contact with ambient air. This lowers oxidation of the fluid at high tempe­ratures to a minimum and prevents crystallization of humidity at low temperatures. In addition, the built-in expansion vessel is actively cooled. Your benefit: Increased user safety and an extended life expectancy of the thermal fluid.
The absolute asset: Thanks to the closed design, the PRESTO prevents unpleasant oil vapor.
4
PRESTO with maximum performance
10 20 30 l/min0
Providing strong cooling and heating capacities, the PRESTO systems cover a working temperature range of -93 °C to +250 °C. Highly efficient components compensate exothermic and endothermic reactions in no time (extremely fast).
The smaller active heat exchange volume ensures faster heat-up and cool-down times.
PRESTO
pump capacity
PRESTO units generate the desired pressure at any time – to protect your applications and investments. The pumps even dynamically compensate for viscosity changes in the heat transfer fluid (except A30). Permanent internal monitoring and magnetically coupled pumps (without seals and leak free) provide best performance and maximum uptime.
BOOST the PRESSURE
use the JULABO Booster Pump to increase pump pressure
Pump capacity
bar
0.6
0.4
0.2
0
__A30
10
20 30 l/min
bar
1.8
1.2
__Stage 2
0.6
_________Stage 4
_______Stage 3
__Stage 1
A40, W40
The pump capacity can be adjusted gradually or by using a pressure value (except A30). The pressure build-up is constantly monitored. Viscosity changes are compensated interactively.
5
THE BEST CHOICE FOR EVERY APPLICATION
PRESTO A30
PRESTO A38
PRESTO A40 and W40
PRESTO A41 and W41
PRESTO A45 and A45t
PRESTO W50 and W50t
PRESTO W55
Heating
capacity / kW
2.7 0.5 0.4 0.2 0.02
2.7 0.79 0.73 0.44 0.28 0.05
2.7 1.2
2.7 1.33 1.24 0.46 0.31 0.07
6 (A45)
12 (A45t)
6 (W50)
12 (W50t)
15 15 10 4 2.5 1.2
Cooling capacity / kW
+20 °C 0 °C -20 °C -30 °C -40 °C -60 °C -80 °C
0.9
(A40)
1 (W40)
3.5 3.3 1.8 1 0.3
7.5 6.5 2.8 1.6 0.6
0.4
0.15
(A40)
0.12
(W40)
PRESTO W56 and W56x
PRESTO W58x
PRESTO A70
PRESTO A80 and W80 Series
PRESTO A85 and W85 Series
PRESTO W91 Series
PRESTO W92 Series
PRESTO W93 Series
27 25.8 23.1 11.5 7.1 3.5
27 33 32 19 12 7
1.8 1 0.91 0.84 0.79 0.75 0.38
1.8 (A80, W80)
3.4 (A80t, W80t)
6 (A85, W85)
15 (A85t, W85t)
18 (W91, W91x)
36 (W91tt, W91ttx)
18 (W92, W92x)
36 (W92tt, W92ttx)
27 19.5 19.5 19.5 19.5 19.5 13 3.5
1.2 1.2 1.1 1.1 1.1 0.65 0.1
2.5 2.4 2.4 2.4 2.4 2.2 0.4
11 11 11 10.5 10.5 8 2
27 20 11 10.5 10.5 8 2
6
-100 °C -50 °C 0 °C +50 °C +150 °C+100 °C +200 °C +250 °C
A30
A38
A40, W40
A41, W41
A45, A45t
W50, W50t
W55
1 stage
W56
W56x
W58x
A70
A80, W80, A80t, W80t
A85, W85, A85t, W85t
W91, W91x, W91tt, W91ttx
W92, W92x, W92tt, W92ttx
W93, W93x
2 stages
7
PRESTO
PRESTO – small and powerful
For working temperatures from -45 °C to +250 °C
All the advantages of the PRESTO series for a working temperature range of -45 °C up to +250 °C.
- Heating capacity up to 2.7 kW
- Cooling capacity up to 1.33 kW
- Temperature stability ±0.01 °C ... ±0.05 °C
- Built-in 5.7’’ industrial color touchscreen
- Ports for USB, Ethernet, RS232, Modbus
- Alarm output
- External Pt100 sensor connection
- Analog connections, RS485, Profibus DP (accessory)
- Second external Pt100 sensor connection for A40 and W40 (accessory)
Air-cooled or water-cooled
The PRESTO units are available as air-cooled or water-coo­led units. Air-cooled units do not require water and can be installed anywhere. If you are looking for a flexible solution or if you expect to move the unit frequently, an air-cooled unit will be the best choice. However, it is important to know that air-cooled units slightly elevate the ambient temperature during operation.
TIP
TIP
TIP
Units with this symbol work with environmentally friendly, natural refrigerants.
Pump capacity
bar
0.6
0.4
0.2
__A30
Water-cooled units must be connected to an existing coo­ling water line. These units are even more quiet and can be virtually enclosed during operation. Robust heat exchangers are installed in the water-cooled PRESTO units. Clogging up the heat exchanger by particles or impure water is virtually impossible.
Cool-down time
Bath fluid: Thermal HL
˚C
+200
+150
+100
+50
0
-50
-100
All data refers to the nominal voltage of 230 V, nominal frequency of 50 Hz and ambient temperature of +20 °C. Cooling capacity measured at max. pump stage. All pump data refers to a bath fluid with a specific density of 1 kg/dm³. Cooling capacity measured with Thermal HL (+200 °C) or Ethanol (except +200 °C)
A38_____
A41, W41
__A30
__A40, W40
40 80
min0
Heat-up time
Bath fluid: Thermal HL
˚C
+200
+150
+100
+50
0
-50
A41, W41 A38 A30
A40, W40
30 60 90
min
10
_______Stage 3
__Stage 2
__Stage1
15 30 45 l/min0
_________Stage 4
__Stage 2
__Stage 1
10 20 30 l/min0
20 30 l/min
A38, A41, W41
_________Stage 4
A40, W40
_______Stage 3
0
bar
1.5
1.0
0.5
bar
1.8
1.2
0.6
8
A30
Order No. 9 420 300
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 2.7
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type single stage, air cooled
Dimensions cm
-30 … +250
±0.01 … ±0.05
+200 °C
-20 °C
l/min 25 bar 0.5
2.4
W × L × H 25 × 59 × 62
0.5
0.2
+20 °C
0.5
-30 °C
0.02
0 °C
0.4
-40°C
-
A38
Order No. 9 420 381.N1
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 2.7
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type single stage, air cooled
Dimensions cm
-45 ... +250
±0.01 … ±0.05
+200 °C
-20 °C
l/min 50 bar 0.1 ... 1.6
3.5
W × L × H 33 x 75 x 67
0.79
0.44
+20 °C
0.79
-30 °C
0.28
0 °C
0.73
-40°C
0.05
A40
Order No. 9 420 401
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 2.7
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type single stage, air cooled
Dimensions cm
-40 … +250
±0.01 … ±0.05
+200 °C
-20 °C
l/min 40 bar 0.1 … 1.7
3.5
W × L × H 33 × 59 × 67
1.2
0.4
+20 °C
1.2
-30 °C
0.15
0 °C
0.9
-40°C
-
Cool-down time
Order No. 9 420 411.N1
Bath fluid: Thermal HL
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 2.7
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type single stage, air cooled
Dimensions cm
A41
-45 ... +250
±0.01 … ±0.05
+200 °C
-20 °C
l/min 50 bar 0.1 ... 1.6
3.5
W × L × H 33 x 75 x 67
1.33
0.46
+20 °C
1.33
-30 °C
0.31
0 °C
1.24
-40°C
0.07
Heat-up time
Order No. 9 421 401
Bath fluid: Thermal HL
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 2.7
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type single stage, water cooled
Dimensions cm
W40
-40 … +250
±0.01 … ±0.05
+200 °C
-20 °C
l/min 40 bar 0.1 … 1.7
3.5
W × L × H 33 × 59 × 67
1.2
0.4
+20 °C
1.2
-30 °C
0.12
-40°C
0 °C
1.0
-
W41
Order No. 9 421 411.N1
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 2.7
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type single stage, water cooled
Dimensions cm
-45 ... +250
±0.01 … ±0.05
+200 °C
-20 °C
l/min 50 bar 0.1 ... 1.6
3.5
W × L × H 33 x 75 x 67
1.33
0.46
+20 °C
1.33
-30 °C
0.31
-40°C
0 °C
1.24
0.07
9
PRESTO
PRESTO A45 / A45t Air-cooled top performance
For working temperatures from -45 °C to +250 °C
Top PRESTO performance down to -45 °C, increased heating power with the A45t.
- Heating capacity up to 12 kW
- Cooling capacity up to 3.5 kW
- Temperature stability ±0.05 °C ... ±0.1 °C
- Built-in 5.7’’ industrial color touchscreen
- Ports for USB, Ethernet, RS232, Modbus
- Alarm output
- External Pt100 sensor connection
- Analog connections, RS485, Profibus DP (accessory)
- Second external Pt100 sensor connection (accessory)
A45
Order No. 9 420 452
Working temperature range °C
Temperature stability °C
Cooling capacity kW
-45 … +250
±0.05 … ±0.1
+200 °C
+20 °C
3.4
-20 °C
-30 °C1-40°C
3.5
1.8
Heating capacity kW 6
Pump capacity Flow rate / Pressure
Process volume min. liters
l/min 80 bar 0.1 … 3.0
7.5
Cooling type single stage, air cooled
Dimensions cm
W × L × H 53 × 66.5 × 126
0 °C
3.3
0.3
A45t
Order No. 9 420 452.T
Working temperature range °C
Temperature stability °C
Cooling capacity kW
-45 … +250
±0.05 … ±0.1
+200 °C
+20 °C
3.4
-20 °C
-30 °C1-40°C
3.5
1.8
Heating capacity kW 12
Pump capacity Flow rate / Pressure
Process volume min. liters
l/min 80 bar 0.1 … 3.0
7.5
Cooling type single stage, air cooled
Dimensions cm
W × L × H 53 × 66.5 × 126
0 °C
3.3
0.3
10
Cool-down time
Bath fluid: Thermal HL
˚C
+200
+150
+100
-100
A45, A45t
+50
0
-50
0
10 20
W50, W50t
30
50
min
40
Heat-up time
Bath fluid: Thermal HL
+200
+150
+100
-100
˚C
+50
0
-50
0
A45
A45t,W50t
10 20
W50
30
40
50
min
All data refers to the nominal voltage of 400 V, nominal frequency of 50 Hz and ambient temperature of +20 °C. Cooling capacity measured at max. pump stage. All pump data refers to a bath fluid with a specific density of 1 kg/dm³. Cooling capacity measured with Thermal HL (+200 °C) or Ethanol (except +200 °C)
PRESTO W50 / W50t Water-cooled and powerful
For working temperatures from -50 °C to +250 °C
W50 and W50t instruments are able to compensate reactions very fast. Maximum heating and cooling performance paired with powerful pumps.
- Heating capacity up to 12 kW
- Cooling capacity up to 7.5 kW
- Temperature stability ±0.05 °C ... ±0.1 °C
- Built-in 5.7’’ industrial color touchscreen
- Ports for USB, Ethernet, RS232, Modbus
- Alarm output
- External Pt100 sensor connection
- Analog connections, RS485, Profibus DP (accessory)
- Second external Pt100 sensor connection
(accessory)
W50
Order No. 9 421 502
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 6
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type single stage, water cooled
Dimensions cm
-50 … +250
±0.05 … ±0.1
+200 °C7+20 °C
-20 °C3-30 °C
l/min 80 bar 0.1 … 3.0
7.5
W × L × H 53 × 66.5 × 126
7.5
-40°C
1.8
0 °C
6.5
0.6
W50t
Order No. 9 421 502.T
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 12
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type single stage, water cooled
Dimensions cm
-50 … +250
±0.05 … ±0.1
+200 °C7+20 °C
-20 °C3-30 °C
l/min 80 bar 0.1 … 3.0
7.5
W × L × H 53 × 66.5 × 126
7.5
-40°C
1.8
0 °C
6.5
0.6
ADJUSTABLE PUMPS FOR MAXIMUM SAFETY
ADJUSTABLE PUMPS FOR MAXIMUM SAFETY
All PRESTO units are equipped with adjustable pumps (except A30). They can be controlled
All PRESTO units are equipped with adjustable pumps (except A30). They can be controlled
not to exceed the maximum allowed fluid pressure in the application (e.g. in glass reactors).
not to exceed the maximum allowed fluid pressure in the application (e.g. in glass reactors). A two-stage, built-in adjustable safety setting is double assurance that the maximum amount
A two-stage, built-in adjustable safety setting is double assurance that the maximum amount of allowed pressure is not exceeded. That means maximum process safety, and an additional
of allowed pressure is not exceeded. That means maximum process safety, and an additional external pressure control is not needed – which saves space and budget.
external pressure control is not needed – which saves space and budget.
The adjustable pumps also ensure more flexibility in connecting the application: high pump
The adjustable pumps also ensure more flexibility in connecting the application: high pump performance allows to bridge long distances or height differences. Set to low pressure, sensitive
performance allows to bridge long distances or height differences. Set to low pressure, sensitive systems can also be connected with short lines.
systems can also be connected with short lines.
11
PRESTO
W55
min
˚C
+50
+100
+150
+200
-50
10 20
30
40
50
-100
0
0
PRESTO W55 Water-cooled and powerful
For working temperatures from -55 °C to +250 °C
The powerful W55 regulates temperatures with high precision and convinces with faster cool-down and heat-up times. It is ideal for use in large external applications such as reactor temperature control, material stress testing or temperature simulation. By using highly efficient components, the PRESTO W55 compensates for exothermic and endothermic reactions even faster.
- Heating capacity up to 15 kW
- Cooling capacity up to 15 kW
- Temperature stability ± 0.05 ... ±0.1 °C
- Built-in 5.7‘‘ industrial color touchscreen
- Connection for alarm output
- Connection for external Pt100 sensor
- RS232, SD memory card, USB, Ethernet, Modbus
- Alarm output, RS485 (accessories), Profibus (accessories)
- Analog inputs / outputs (accessories)
W55
Order No. 9 421 552
Working temperature range °C
Temperature stability °C
Cooling capacity kW
-55 … +250
±0.05 … ±0.1
+200 °C
+20 °C150 °C
13.5
-20 °C4-30 °C
-40°C
2.5
Heating capacity kW 15
Pump capacity Flow rate / Pressure
Process volume min. liters
l/min 80 bar 0.1 … 3.0
11.5
Cooling type single stage, water cooled
Dimensions cm
W × L × H 61 × 84.5 × 125
10
1.2
Heat-up time
Bath fluid: Thermal HL
˚C
+200
+150
+100
+50
-50
-100
W55
0
30
0
10 20
50
min
40
Cool-down time
Bath fluid: Thermal HL
All data refers to the nominal voltage of 400 V, nominal frequency of 50 Hz and ambient temperature of +20 °C. Cooling capacity measured at max. pump stage. All pump data refers to a bath fluid with a specific density of 1 kg/dm³. Cooling capacity measured with Thermal HL (+200 °C) or Ethanol (except +200 °C)
12
PRESTO W56 / W56x and W58x Water-cooled and powerful
For working temperatures from -56 °C to +250 °C
The water-cooled PRESTO W56, W56x and W58x can temperature control applications with high performance requirements very quickly and efficiently. Even at low temperatures they have large power reserves for challenging external applications.
The magnetically coupled pump allows the user to optimally adjust pump capacity to suit the application, even over large dis­tances and height differences, as well as for pressure-sensitive applications. Use of the latest thermodynamic technologies means that the cooling capacity is automatically adjusted to the current power requirements.
The PRESTO W56x and W58x have a gear pump, which also allows use of bath fluids with a higher viscosity.
- Heating capacity up to 27 kW
- Cooling capacity up to 33 kW
- Temperature stability ± 0.05 ... ±0.1 °C
- Connections for alarm output and external Pt100 sensor
- RS232, SD memory card, USB, Ethernet, Modbus
- Alarm output, RS485 (accessories), Profibus (accessories)
- Analog inputs / outputs (accessories)
Overview pump pressure
W56, W56x and W58x
bar
5
4
3
2
1
0
Medium: Water / Glycol 40:60
W56
20 60 7010 30 40 50
W56x W58x
20 °C -30 °C -40 °C
l/min0
W56
Order No. 9 421 562
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 27
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type single stage, water cooled
Dimensions cm
-56 … +250
±0.05 … ±0.1
+200 °C19+20 °C
-20 °C
11.5
l/min 80 bar 0.1 … 3.0
11
W × L × H 60 × 94 × 164
25.8
-30 °C
7.1
0 °C
23.1
-40°C
3.5
W56x
Order No. 9 421 563
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 27
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type single stage, water cooled
Dimensions cm
-50 ... +250
±0.05 … ±0.1
+200 °C19+20 °C
-20 °C
11.5
l/min 70 bar 0.1 … 5.5
11
W × L × H 60 × 94 × 164
25.8
-30 °C
7.1
-40°C
0 °C
23.1
3.5
W58x
Order No. 9 421 583.S1
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 27
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type single stage, water cooled
Dimensions cm
-50 ... +250
±0.05 … ±0.1
+200 °C24+20 °C330 °C
-20 °C19-30 °C12-40°C
l/min 70 bar 0.1 … 5.5
13
W × L × H 70 × 108 × 174
32
7
13
PRESTO
PRESTO A70, A80 / A80t and W80 / W80t Low temperatures – no problem
For working temperatures from -80 °C to +250 °C
The 2-stage cooling systems provide lower temperatures with all of the other PRESTO advantages.
- Heating capacity up to 3.4 kW
- Cooling capacity up to 1.2 kW
- Temperature stability ±0.01 °C ... ±0.05 °C
- Built-in 5.7’’ industrial color touchscreen
- Ports for USB, Ethernet, RS232, Modbus
- Alarm output
- External Pt100 sensor connection
- Analog connections, RS485, Profibus DP (accessory)
- Second external Pt100 sensor connection (accessory)
A70
Order No. 9 420 701.N1
Working temperature range °C
Temperature stability °C
Cooling capacity kW
-75 ... +250
±0.01 … ±0.05
+200 °C
+20 °C 10 °C
1.3
-40 °C
-60 °C
0.75
0.38
Heating capacity kW 1.8
Pump capacity Flow rate / Pressure
Process volume min. liters
l/min 40
bar 0.1 … 1.7
3.9
Cooling type 2-stage, air cooled
Dimensions cm
W × L × H 57 × 74.5 × 88
0.91
-80 °C
-70 °C
0.12
14
Heat-up time
Bath fluid: Thermal HL
˚C
+200
+150
+100
____A70, A80, W80
+50
____A80t, W80t
0
-50
-100 0
20 3010 40 50
min
Cool-down time
Bath fluid: Thermal HL
˚C
+200
____A70
+150
+100
+50
-50
-100
0
_________A80, A80t W80, W80t
15 30
Pump capacity
bar
A70, A80, A80t,W80, W80t
1.8
1.2
0.6
min0
___________Stage 4
_______Stage 3
__Stage 2
__Stage 1
0 l/min
20 30
10
All data refers to the nominal voltage of 230 V, nominal frequency of 50 Hz (respectively 400 V, 3Ph., 50 Hz) and ambient temperature of +20 °C. Cooling capacity measured at max. pump stage. All pump data refers to a bath fluid with a specific density of 1 kg/dm³. Cooling capacity measured with Thermal HL (+200 °C) or Ethanol (except +200 °C)
A80
Order No. 9 420 801
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 1.8
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type 2-stage, air cooled
Dimensions cm
-80 … +250
±0.01 … ±0.05
+200 °C
l/min 40
bar 0.1 … 1.7
3.9
W × L × H 43 × 65 × 126
1.2
-40 °C
1.1
+20 °C
1.2
-60 °C
0.65
0 °C
1.2
-80 °C
0.1
W80
Order No. 9 421 801
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 1.8
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type 2-stage, water cooled
Dimensions cm
-80 … +250
±0.01 … ±0.05
+200 °C
l/min 40
bar 0.1 … 1.7
3.9
W × L × H 43 × 65 × 126
1.2
-40 °C
1.1
+20 °C
1.2
-60 °C
0.65
0 °C
1.2
-80 °C
0.1
A80t
Order No. 9 420 801.T
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 3.4
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type 2-stage, air cooled
Dimensions cm
-80 … +250
±0.01 … ±0.05
+200 °C
l/min 40
bar 0.1 … 1.7
3.9
W × L × H 43 × 65 × 126
1.2
-40 °C
1.1
+20 °C
1.2
-60 °C
0.65
0 °C
1.2
-80 °C
0.1
W80t
Order No. 9 421 801.T
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 3.4
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type 2-stage, water cooled
Dimensions cm
-80 … +250
±0.01 … ±0.05
+200 °C
l/min 40
bar 0.1 … 1.7
3.9
W × L × H 43 × 65 × 126
1.2
-40 °C
1.1
+20 °C
1.2
-60 °C
0.65
0 °C
1.2
-80 °C
0.1
15
PRESTO
15 30
˚C
min0
___TW20
-50
0
+50
+100
+150
+200
-100
___A85, A85t W85, W85t
2010 30 40 50
˚C
min
0
-50
0
+50
+100
+200
+150
-100
____A85, W85
PRESTO A85 / A85t and W85 / W85t Power packages
For working temperatures from -85 °C to +250 °C
High cooling capacities enable extremely low temperatures down to -85 °C possible. The high heating capacity, particularly with the A85t and the W85t, provides even more flexibility in the application.
- Heating capacity up to 15 kW
- Cooling capacity up to 2.8 kW
- Temperature stability ±0.05 °C ... ±0.1 °C
- Built-in 5.7’’ industrial color touchscreen
- Ports for USB, Ethernet, RS232, Modbus
- Alarm output
- External Pt100 sensor connection
- Analog connections, RS485, Profibus DP (accessory)
- Second external Pt100 sensor connection (accessory)
Heat-up time
Bath fluid: Thermal HL
Cool-down time
Bath fluid: Thermal HL
A85
Order No. 9 420 852
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 6
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type 2-stage, air cooled
Dimensions cm
-85 … +250
±0.05 … ±0.1
+200 °C
-40 °C
l/min 80
bar 0.1 … 3.0
9.5
W × L × H 61 × 108 × 125
2.8
2.4
+20 °C
2.5
-60 °C
2.2
0 °C
2.4
-80 °C
0.4
16
BEST PERFORMANCE
PRESTO provides the best values in heating and cooling performance and enables rapid compensation of temperature changes in the application. Powerful magnetically cou­pled pumps (with no seals and leak free) keep the lab clean and achieve high flow rates without damaging the application connected.
PRESTO is suitable for a wide range of applications such as double-jacketed reactors, autoclaves, combinatorial chemistry, reaction blocks and much more. The W91 and W92 systems are especially well suited for use in pilot plants, material and component testing as well as for environmental testing and simulations.
All data refers to the nominal voltage of 400 V, 3Ph., nominal frequency of 50 Hz and ambient temperature of +20 °C. Cooling capacity measured at max. pump stage. All pump data refers to a bath fluid with a specific density of 1 kg/dm³. Cooling capacity measured with Thermal HL (+200 °C) or Ethanol (except +200 °C)
A85t
Order No. 9 420 852.T
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 15
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type 2-stage, air cooled
Dimensions cm
-85 … +250
±0.05 … ±0.1
+200 °C
l/min 80
bar 0.1 … 3.0
9.5
W × L × H 61 × 108 × 125
2.8
-40 °C
2.4
+20 °C
2.5
-60 °C
2.2
0 °C
2.4
-80 °C
0.4
W85
Order No. 9 421 852
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 6
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type 2-stage, water cooled
Dimensions cm
-85 … +250
±0.05 … ±0.1
+200 °C
l/min 80
bar 0.1 … 3.0
9.5
W × L × H 61 × 84.5 × 125
2.8
-40 °C
2.4
+20 °C
2.5
-60 °C
2.2
0 °C
2.4
-80 °C
0.4
W85t
Order No. 9 421 852.T
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 15
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type 2-stage, water cooled
Dimensions cm
-85 … +250
±0.05 … ±0.1
+200 °C
l/min 80
bar 0.1 … 3.0
9.5
W × L × H 61 × 84.5 × 125
2.8
-40 °C
2.4
+20 °C
2.5
-60 °C
2.2
0 °C
2.4
-80 °C
0.4
Booster Pump
The JULABO magnetically coupled Booster Pump is the ideal solution to increase the pressure or flow rate in your application. The Booster Pump is specifically designed to be easily connected between PRESTO units and your application.
The Mag Drive Booster Pump can increase your fluid pressure up to 2.1 bar. The stainless steel design of the pump provides excellent chemical resistivity. The magnetically coupled design guarantees 100 % leakage free operation over an extraordinary temperature range of -90 °C … +250 °C.
BOOST the PRESSURE
use the JULABO Booster Pump to increase pump pressure
Application Example:
Pump control cable
Booster Pump
Mains power supply
Mains power supply
17
PRESTO
PRESTO W91
For working temperatures from -91 °C to +250 °C
BEST PUMP PERFORMANCE
Best heating performance combined with high cooling capacity – those are the key features of the W91 systems. These models are just as ready for embedding into pilot plants as they are for use in material and component testing.
The W91x and W91ttx models have a gear pump, which also allows use of bath fluids with a higher viscosity.
- Heating capacity up to 36 kW
- Cooling capacity up to 11 kW
- Temperature stability ±0.05 °C ... ±0.2 °C
- Built-in 5.7’’ industrial color touchscreen
- Ports for USB, Ethernet, RS232, Modbus
- Alarm output
- External Pt100 sensor connection
- Analog connections, RS485, Profibus DP (accessory)
- Second external Pt100 sensor connection (accessory)
Cool-down time
Bath fluid: Thermal HL
All PRESTO units are equipped with powerful, magneti­cally coupled pumps (without seals and leak free). The W91 and W92 models can also be equipped with a gear pump. The instruments with gear pumps are indicated with an ‘x’. The gear pumps provide a higher fluid pressure and a more constant flow rate than the centrifugal pumps, especially when high viscosity fluids are used.
+200
+150
+100
+50
-100
˚C
W91, W91x
0
-50
30
0
10 20
50
min
40
W91
Order No. 9 421 912
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 18
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type 2-stage, water cooled
Dimensions cm
-91 … +250
±0.05 … ±0.2
+200 °C
l/min 80
bar 0.1 … 3.0
28
W × L × H 95 × 127 × 190
11
-40 °C
10.5
+20 °C
11
-60 °C8-80 °C
0 °C
11
2
Order No. 9 421 912.TT
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 36
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type 2-stage, water cooled
Dimensions cm
W91tt
-91 … +250
±0.05 … ±0.2
+200 °C
-40 °C
l/min 80
bar 0.1 … 3.0
28
W × L × H 95 × 127 × 190
11
10.5
+20 °C
-60 °C8-80 °C
0 °C
11
11
2
18
All data refers to the nominal voltage of 400 V, 3 Ph., 50 Hz and ambient temperature of +20 °C. Cooling capacity measured at max. pump stage. All pump data refers to a bath fluid with a specific density of 1 kg/dm³. Cooling capacity measured with Thermal HL (+200 °C) or Ethanol (except +200 °C)
Top performance for demanding temperature applications
JULABO PRESTO is synonymous with best performance in highly dynamic temperature control systems. In temperature ranges from
-93 °C to +250 °C, PRESTO provides highest heating and cooling capacity paired with powerful and maintenance-free pumps. The PRESTO portfolio features a wide range of units for various applications.
PRESTO systems are ideal for reactor temperature control.
Various reactors can be connected to the PRESTO system using the available tubing. Such as the PRESTO A80. With a heating capacity of 1.8 kW, the PRESTO A80 can heat up a reactor with the thermal bath fluid in it from 0 °C to +50 °C in 1 hour and 30 minutes without overheating*.
More case studies can be found at https://case-studies.julabo.com
TIP
* tested with the JULABO Thermal HL80 and 20 l reactor
filled with 18 l JULABO Thermal HL40
W91×
Order No. 9 421 913
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 18
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type 2-stage, water cooled
Dimensions cm
-91 … +250
±0.05 … ±0.2
+200 °C
l/min 70
bar 0.1 … 5.5
28
W × L × H 95 × 127 × 190
11
-40 °C
10.5
+20 °C
11
-60 °C8-80 °C
0 °C
11
2
W91tt×
Order No. 9 421 913.TT
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 36
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type 2-stage, water cooled
Dimensions cm
-91 … +250
±0.05 … ±0.2
+200 °C
-40 °C
l/min 70
bar 0.1 … 5.5
28
W × L × H 95 × 127 × 190
11
10.5
+20 °C
11
-60 °C8-80 °C
0 °C
11
2
19
PRESTO
PRESTO W92
For working temperatures from -92 °C to +250 °C
The W92 class process systems are extremely powerful and can also simulate extreme environmental conditions. They are used, for example, in the temperature control of vacuum chambers for component testing in the aerospace industry.
The W92x and W92ttx models have a gear pump, which also allows use of bath fluids with a higher viscosity.
- Heating capacity up to 36 kW
- Cooling capacity up to 31 kW
- Temperature stability ± 0.05 °C ... ±0.2 °C
- Built-in 5.7’’ industrial color touchscreen
- Ports for USB, Ethernet, RS232, Modbus
- Alarm output
- External Pt100 sensor connection
- Analog connections, RS485, Profibus DP (accessory)
- Second external Pt100 sensor connection (accessory)
W92
Order No. 9 421 922
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 18
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type 2-stage, water cooled
Dimensions cm
-92 … +250
±0.05 … ±0.2
+200 °C
-40 °C
l/min 80
bar 0.1 … 3.0
28
W × L × H 95 × 127 × 190
31
10.5
+20 °C
27
-60 °C8-80 °C
0 °C
20
2
20
W92tt
Order No. 9 421 922.TT
Working temperature range °C
Temperature stability °C
Cooling capacity kW
Heating capacity kW 36
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type 2-stage, water cooled
Dimensions cm
-92 … +250
±0.05 … ±0.2
+200 °C
-40 °C
l/min 80
bar 0.1 … 3.0
28
W × L × H 95 × 127 × 190
31
10.5
+20 °C
27
-60 °C8-80 °C
Order No. 9 421 923
Working temperature range °C
Temperature stability °C
0 °C
20
Cooling capacity kW
2
Heating capacity kW 18
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type 2-stage, water cooled
Dimensions cm
W92×
-92 … +250
±0.05 … ±0.2
+200 °C
l/min 70
bar 0.1 … 5.5
28
W × L × H 95 × 127 × 190
31
-40 °C
10.5
+20 °C
-60 °C8-80 °C
0 °C
27
Order No. 9 421 923.TT
Working temperature range °C
Temperature stability °C
20
Cooling capacity kW
2
Heating capacity kW 36
Pump capacity Flow rate / Pressure
Process volume min. liters
Cooling type 2-stage, water cooled
Dimensions cm
-92 … +250
±0.05 … ±0.2
l/min 70
bar 0.1 … 5.5
28
W × L × H 95 × 127 × 190
+200 °C
31
-40 °C
10.5
W92tt×
+20 °C
27
-60 °C8-80 °C
0 °C
20
2
˚C
PRESTO W93 / W93x Full cooling capacity in the low temperature range
for working temperatures from -93 °C...+250 °C
W93 process systems offer users high cooling capacity even in the lowest temperature ranges for dynamic applications. They work with natural refrigerants and are also very energy efficient thanks to state-of-the-art technologies.
The W93x has a gear pump, which also allows use of bath fluids with a higher viscosity.
- Heating capacity of 27 kW
- Cooling capacity up to 19.5 kW
- Temperature stability ±0.05...±0.2 °C
- Built-in 5.7‘‘ industrial color touchscreen
- Ports for USB, Ethernet, RS232, Modbus
- Alarm output
- External Pt100 sensor connection
- Analog connections, RS485, profibus DP (accessory)
- Second external Pt100 sensor connection (accessory)
Heat-up time
Bath fluid: Thermal HL
+200
+150
+100
+50
W92, W92x
0
-50
-100 0
10 20
30
50
min
40
W93
Order No. 9 421 932.N1
Working temperature range °C
Temperature stability °C
-93 ... +250
±0.05 … ±0.2
+200 °C +20 °C
Cooling capacity kW
-40 °C
19.5
-60 °C13-80 °C
19.5
Heating capacity kW 27
Pump capacity Flow rate / Pressure
Process volume min. liters
l/min 80
bar 0.1 ... 3.0
14
Cooling type 2-stage, water cooled
Dimensions cm
W × L × H 93 × 148 × 192
0 °C
19.5
3.5
Cool-down time
Bath fluid: Thermal HL
˚C
+200
+150
+100
+50
W92, W92t
0
-50
-100 0
All data refers to the nominal voltage of 400 V, 3 Ph., 50 Hz and ambient temperature of +20 °C. Cooling capacity measured at max. pump stage. All pump data refers to a bath fluid with a specific density of 1 kg/dm³. Cooling capacity measured with Thermal HL (+200 °C) or Ethanol (except +200 °C)
10 20
30
50
min
40
W93x
Order No. 9 421 933.N1
Working temperature range °C
Temperature stability °C
-93 ... +250
±0.05 … ±0.2
+200 °C +20 °C
Cooling capacity kW
-40 °C
19.5
-60 °C13-80 °C
19.5
Heating capacity kW 27
Pump capacity Flow rate / Pressure
Process volume min. liters
l/min 70
bar 0.1 ... 5.5
14
Cooling type 2-stage, water cooled
Dimensions cm
W × L × H 93 × 148 × 192
0 °C
19.5
3.5
21
Accessories
JULABO Thermal bath fluids for the PRESTO
Advantages
- Broad temperature ranges
- Low viscosity
- High stability
- Good thermal conductivity
- Almost odorless
- Long life
Working temperature range
-100 °C 0 °C +100 °C +200 °C
-30 +90
-60 +250 Thermal HL60
-90 +200 Thermal HL90
Thermal HL30
Makes day-to-day work in labs easier
JULABO Thermal bath fluids with practical drain port included.
22
Thermal HL30
Order No. 5 liters 8 940 139
Order No. 10 liters 8 940 138
A30, A38, A40, W40, A41,
Suitable for
Working temperature range °C
Flash point °C -
Fire point °C -
Viscosity, (kinematic at +20 °C) mm
Density ( at +20 °C ) g/cm
Pour point °C -70
Boiling point °C +108
Ignition temperature °C +430
Color light yellow
2
/s
3
W41, A45, A45t, W50, W50t, W55, W56, W56x, W58x
-30 … +90
4.07
1.08
Thermal HL60
Order No. 5 liters 8 940 141
Order No. 10 liters 8 940 140
Suitable for PRESTO
Working temperature range °C
Flash point °C >+120
Fire point °C +142
Viscosity, (kinematic at +20 °C) mm
Density ( at +20 °C ) g/cm
Pour point °C -100
Boiling point °C +288
Ignition temperature °C +350
Color clear
2
/s
3
-60 … +250
5.66
0.92
Thermal HL90
Order No. 5 liters 8 940 143
Order No. 10 liters 8 940 142
Suitable for PRESTO
Working temperature range °C
Flash point °C >+80
Fire point °C +126
Viscosity, (kinematic at +20 °C) mm
Density ( at +20 °C ) g/cm
Pour point °C -120
Boiling point °C +220
Ignition temperature °C +300
Color clear
2
/s
3
-90 … +200
2.16
0.91
JULABO Thermal bath fluids based on silicone …
… are chemically inert substances which do not affect metals like iron, copper, zinc, aluminum, chrome or nickel. Compared to other fluids, JULABO Thermal fluids have an extraordinarily low electrical conductivity. When properly stored, the fluids will last for 12 months and longer as they are not susceptible to climatic influences.
JULABO Thermal bath fluids based on water-glycol …
… (monoethylenglycol with anti-corrosion additives) have excellent thermal characteristics and a low viscosity. In addition, they provide anti-freeze protection, i.e. they can be applied at temperatures below the freezing point of water.
More information about JULABO Thermal bath fluids …
… in our brochure ‘Thermal Bath Fluids’ at www.julabo.com.
COST EFFICIENT:
LESS THERMAL BATH FLUID
PRESTO instruments need less thermal bath fluid. Compared to conventional bath circulators, PRESTO uses less active heat exchanger volume. The hot or cold fluid does not come in contact with the surrounding air so a larger temperature range can be covered with only one thermal bath fluid.
23
Accessories
External Pt100 sensors / Extension Cable
Order No. Description Suitable for
8 981 003 200 × 6 mm dia., stainless steel, 1.5 m cable PRESTO
8 981 006 20 × 2 mm dia., stainless steel, 1.5 m cable PRESTO
8 981 010 300 × 6 mm dia., stainless steel, 1.5 m cable PRESTO
8 981 017 200 × 6 mm dia., stainless steel/PTFE coated, 3.0 m cable PRESTO
8 981 015 300 × 6 mm dia., stainless steel/PTFE coated, 3.0 m cable PRESTO
8 981 013 600 × 6 mm dia., stainless steel/PTFE coated, 3.0 m cable PRESTO
8 981 016 900 × 6 mm dia., stainless steel/PTFE coated, 3.0 m cable PRESTO
8 981 014 1200 × 6 mm dia., stainless steel/PTFE coated, 3.0 m cable PRESTO
8 981 021 M+R in-line Pt100 sensor, 2 fittings M24 × 1.5 male, 1.5 m cable PRESTO
8 981 022 M+R in-line Pt100 sensor, 2 fittings M30 × 1.5 male, 1.5 m cable PRESTO
8 981 023 M+R in-line Pt100 sensor, 2 fittings M38 × 1.5 male, 1.5 m cable PRESTO
8 981 103 Extension cable 3.5 m for Pt100 sensor PRESTO
8 900 106 Module with Pt100 connection socket for second external Pt100 sensor PRESTO (except A30)
Metal tubing flexible, triple insulated, -100 °C to +350 °C
Order No. Description Suitable for
8 930 261 1.0 m Metal tubing, 2 fittings M24 × 1.5 female PRESTO
8 930 262 1.5 m Metal tubing, 2 fittings M24 × 1.5 female PRESTO
8 930 263 2.0 m Metal tubing, 2 fittings M24 × 1.5 female PRESTO
8 930 264 3.0 m Metal tubing, 2 fittings M24 × 1.5 female PRESTO
8 930 271 1.0 m Metal tubing, 2 fittings M30 × 1.5 female PRESTO
8 930 272 1.5 m Metal tubing, 2 fittings M30 × 1.5 female PRESTO
8 930 273 2.0 m Metal tubing, 2 fittings M30 × 1.5 female PRESTO
8 930 274 3.0 m Metal tubing, 2 fittings M30 × 1.5 female PRESTO
8 930 275 5.0 m Metal tubing, 2 fittings M30 × 1.5 female PRESTO
8 930 282 1.5 m Metal tubing, 2 fittings M38 × 1.5 female PRESTO
8 930 283 2.0 m Metal tubing, 2 fittings M38 × 1.5 female PRESTO
8 930 284 3.0 m Metal tubing, 2 fittings M38 × 1.5 female PRESTO
8 930 285 5.0 m Metal tubing, 2 fittings M38 × 1.5 female PRESTO
PTFE tubing -60 °C to +180 °C
24
Order No. Description Suitable for
8 930 140 1 m PTFE Tubing, 8 mm inner dia.
8 930 142 1 m PTFE Tubing, 12 mm inner dia.
PRESTO
PRESTO
Adapters / Valves / Connectors etc.
Order No. Description Suitable for
8 890 110 Adapter M24 × 1.5 male to M24 × 1.5 male PRESTO
8 890 111 Adapter M30 × 1.5 male to M30 × 1.5 male PRESTO
8 890 112 Adapter M38 × 1.5 male to M38 × 1.5 male PRESTO
8 890 120 2 Elbow fittings 90°, M24 × 1.5 female/male PRESTO
8 890 121 2 Elbow fittings 90°, M30 × 1.5 female/male PRESTO
8 890 122 2 Elbow fittings 90°, M38 × 1.5 female/male PRESTO
8 890 034 2 Adapters M30 × 1.5 female to M16 × 1 male, stainless steel PRESTO
8 890 035 2 Adapters M30 × 1.5 male to M16 × 1 male, stainless steel PRESTO
8 890 052 2 Adapters M24 × 1.5 female to M16 × 1 male PRESTO
8 890 053 2 Adapters M24 × 1.5 female to NPT 1/4" female PRESTO
8 890 054 2 Adapters M24 × 1.5 female to NPT 3/8" female PRESTO
8 890 055 2 Adapters M24 × 1.5 female to NPT 1/2" female PRESTO
8 890 056 2 Adapters M24 × 1.5 female to NPT 3/4" female PRESTO
8 890 057 2 Adapters M24 × 1.5 female to NPT 1" female PRESTO
8 890 058 2 Adapters M24 × 1.5 female to NPT 1/4" male PRESTO
8 890 059 2 Adapters M24 × 1.5 female to NPT 3/8" male PRESTO
8 890 060 2 Adapters M24 × 1.5 female to NPT 1/2" male PRESTO
8 890 061 2 Adapters M24 × 1.5 female to NPT 3/4" male PRESTO
8 890 062 2 Adapters M24 × 1.5 female to NPT 1" male PRESTO
8 890 063 2 Adapters M24 × 1.5 female to tube 1/4" PRESTO
8 890 064 2 Adapters M24 × 1.5 female to tube 3/8" PRESTO
8 890 065 2 Adapters M24 × 1.5 female to tube 1/2" PRESTO
8 890 066 2 Adapters M24 × 1.5 female to tube 1" PRESTO
8 890 067 2 Adapters M24 × 1.5 female/M24 × 1.5 female PRESTO
8 890 068 2 Adapters M24 × 1.5 female/M30 × 1.5 male PRESTO
8 890 069 2 Adapters M24 × 1.5 male/M30 × 1.5 female PRESTO
8 890 070 2 Adapters M24 × 1.5 female/M30 × 1.5 female PRESTO
8 890 071 2 Adapters M24 × 1.5 male/M16 × 1 female PRESTO
8 890 072 2 Adapters M24 × 1.5 male to barbed fitting 12 mm PRESTO
8 890 080 2 Adapters M30 × 1.5 female/M38 × 1.5 male PRESTO
8 890 081 2 Adapters M30 × 1.5 male/M38 × 1.5 female PRESTO
8 890 082 2 Adapters M30 × 1.5 female/M38 × 1.5 female PRESTO
8 890 083 2 Adapters M30 × 1.5 female to NPT 3/4" male PRESTO
8 890 084 2 Adapters M30 × 1.5 female to NPT 3/4" female PRESTO
8 890 085 2 Adapters M30 × 1.5 female to NPT 1" male PRESTO
8 890 086 2 Adapters M30 × 1.5 female to NPT 1" female PRESTO
25
Accessories
Adapters / Valves / Connectors etc.
Order No. Description Suitable for
8 890 087 2 Adapters M30 × 1.5 female to tube 1" PRESTO
8 890 088 2 Adapters M30 × 1.5 female/M30 × 1.5 female PRESTO
8 890 089 2 Adapters M38 × 1.5 female/M38 × 1.5 female PRESTO
8 890 100 2 Adapters M38 × 1.5 female to NPT 1" male PRESTO
8 890 101 2 Adapters M38 × 1.5 female to NPT 1" female PRESTO
8 890 102 2 Adapters M38 × 1.5 female to NPT 1 1/4" male PRESTO
8 890 103 2 Adapters M38 × 1.5 female to NPT 1 1/4" female PRESTO
8 890 104 2 Adapters M38 × 1.5 female to tube 1" PRESTO
8 890 130
8 890 131
8 890 132
8 890 133
8 890 134
8 890 135
8 890 140 Twin distributing adapter M24 × 1.5, 1 × M24 × 1.5 female to 2 × M24 × 1.5 male PRESTO
8 890 141 Quad distributing adapter M24 × 1.5, 1 × M24 × 1.5 female to 4 × M24 × 1.5 male PRESTO
8 890 142 Twin distributing adapter M30 × 1.5, 1 × M30 × 1.5 female to 2 × M30 × 1.5 male PRESTO
8 890 143 Quad distributing adapter M30 × 1.5, 1 × M30 × 1.5 female to 4 × M30 × 1.5 male PRESTO
8 890 144 Twin distributing adapter M38 × 1.5, 1 × M38 × 1.5 female to 2 × M38 × 1.5 male PRESTO
8 890 145 Quad distributing adapter M38 × 1.5, 1 × M38 × 1.5 female to 4 × M38 × 1.5 male PRESTO
8 970 495 2 Collar nuts M24 × 1.5 PRESTO
8 970 496 2 Collar nuts M30 × 1.5 PRESTO
8 970 497 2 Collar nuts M38 × 1.5 PRESTO
8 970 850 Shut-off valve M16 × 1 female/male, -60 °C ... +200 °C PRESTO
8 970 851 Shut-off valve M24 × 1.5 female/male, -60 °C ... +200 °C PRESTO
8 970 852 Shut-off valve M30 × 1.5 female/male, -60 °C ... +200 °C PRESTO
8 970 853 Shut-off valve M38 × 1.5 female/male, -60 °C ... +200 °C PRESTO
Twin distributing adapter M24 × 1.5, isolated, 1 × M24 × 1.5 female to 2 × M24 × 1.5 male
Quad distributing adapter M24 × 1.5, isolated, 1 × M24 × 1.5 female to 4 × M24 × 1.5 male
Twin distributing adapter M30 × 1.5, isolated, 1 × M30 × 1.5 female to 2 × M30 × 1.5 male
Quad distributing adapter M30 × 1.5, isolated, 1 × M30 × 1.5 female to 4 × M30 × 1.5 male
Twin distributing adapter M38 × 1.5, isolated, 1 × M38 × 1.5 female to 2 × M38 × 1.5 male
Quad distributing adapter M38 × 1.5, isolated, 1 × M38 × 1.5 female to 4 × M38 × 1.5 male
PRESTO
PRESTO
PRESTO
PRESTO
PRESTO
PRESTO
26
Self-sealing coupling
Order No. Description Suitable for
8 980 710
8 980 711
8 980 712
8 980 713
Self-sealing coupling (-20 °C … +200°C) Connection M16×1 male Connection temperature: +20 °C Laser engraving with temperature range Materials: Stainless steel Seal: FKM
Self-sealing adapter (-20 °C … +200°C), Connection M16×1 male Connection temperature: +20 °C Laser engraving with temperature range Materials: Stainless steel Seal: FKM
Self-sealing coupling (-20 °C … +200°C), Connection M24×1.5 male Connection temperature: +20 °C Laser engraving with temperature range Materials: Stainless steel Seal: FKM
Self-sealing adapter (-20 °C … +200°C), Connection M24×1.5 male Connection temperature: +20 °C Laser engraving with temperature range Materials: Stainless steel Seal: FKM
PRESTO
PRESTO
PRESTO
PRESTO
Order No. Description Suitable for
8 980 714
8 980 715
8 980 716
8 980 717
8 980 720
8 980 721
8 980 722
8 980 723
8 980 724
8 980 725
Self-sealing coupling (-45 °C … +220°C), Connection M16×1 male Connection temperature: +20 °C, Laser engraving with temperature range Materials: Stainless steel 1.4404/1.4571 or equivalent Seal: FFKM
Self-sealing adapter (-45 °C … +220°C), Connection M16×1 male Connection temperature: +20 °C Materials: Stainless steel 1.4404/1.4571 or equivalent Seal: FFKM
Self-sealing coupling (-45 °C … +220°C), Connection M24×1.5 male Connection temperature: +20 °C, Laser engraving with temperature range Materials: Stainless steel 1.4404/1.4571 or equivalent Seal: FFKM
Self-sealing adapter (-45 °C … +220°C), Connection M24×1.5 male Connection temperature: +20 °C, Laser engraving with temperature range Materials: Stainless steel 1.4404/1.4571 or equivalent Seal: FFKM
Self-sealing coupling (-45 °C … +220°C), Connection male Connection temperature: +20 °C, Laser engraving with temperature range Materials: Stainless steel 1.4404/1.4571 or equivalent Seal: FFKM Double-sided shut-off clean-break technology (low-loss and low-inclusion operation)
Self-sealing adapter (-45 °C … +220°C), Connection M16×1 male Connection temperature: +20 °C, Laser engraving with temperature range Materials: Stainless steel 1.4404/1.4571 or equivalent Seal: FFKM Double-sided shut-off cle­an-break technology (low-loss and low-inclusion operation)
Self-sealing coupling (-45 °C … +220°C), M24×1.5 außen Kuppeltemperatur: +20 °C, Lasergravur mit Temperaturbereich Werkstoff: Edelstahl 1.4404/1.4571 oder gleichwertig Dichtung: FFKM Beidseitig absperrende Clean-Break-Technologie (verlust- und einschlussarme Betätigung)
Self-sealing adapter (-45 °C … +220°C), Connection M24×1.5 male Connection temperature: +20 °C, Laser engraving with temperature range Materials: Stainless steel 1.4404/1.4571 or equivalent Seal: FFKM Double-sided shut-off clean-break technology (low-loss and low-inclusion operation)
Self-sealing coupling (-45 °C … +220°C), Connection M30×1.5 male Connection temperature: +20 °C, Laser engraving with temperature range Materials: Stainless steel 1.4404/1.4571 or equivalent Seal: FFKM Double-sided shut-off clean-break technology (low-loss and low-inclusion operation)
Self-sealing adapter (-45 °C … +220°C), Connection M30×1.5 male Connection temperature: +20 °C, Laser engraving with temperature range Materials: Stainless steel 1.4404/1.4571 or equivalent Seal: FFKM Double-sided shut-off clean-break technology (low-loss and low-inclusion operation)
PRESTO
PRESTO
PRESTO
PRESTO
PRESTO
PRESTO
PRESTO
PRESTO
PRESTO
PRESTO
External expansion vessels
Order No. Description Suitable for
8 970 832 External expansion vessel, 3 liters A30, A40, W40, W41
8 970 833 External expansion vessel, 3 liters
A45, A45t, W50, W50t, W55, A80, A80t, W80, W80t, A85, A85t, W85, W85t
Filter mats
Order No. Description Suitable for
8 970 920 Filter mat
8 970 921 Filter mat
8 970 922 Filter mat
8 970 923 Filter mat
8 970 924 Filter mat
A30
A40, A41
A80
A45
A85
27
Accessories
Cooling water connection
Order No. Description Suitable for
8 930 312 1 m Reinforced tubing (pressure proof) ½“ inner dia. W40, W80
8 970 482 2 Tube clamps W40, W80
8 920 000 Particle filter for cooling water circuit
8 930 331
8 930 332
8 930 341
8 930 342
1.5 m Flexible braided tubing G 3/4“ (-30 … +100 °C) with 2 straight fittings with cap nut for cooling water connection
2 m Flexible braided tubing G 3/4“ (-30 … +100 °C) with 2 stra­ight fittings with cap nut for cooling water connection
1.5 m Flexible braided tubing G 3/4“ (-30 … +100 °C) 1 straight fitting / 1 elbow fitting 90°, both with cap nut for cooling water connection
2 m Flexible braided tubing G 3/4“ (-30 … +100 °C) 1 straight fitting / 1 elbow fitting 90°, both with cap nut for cooling water connection
W40, W41, W50, W50t, W55, W80, W80t, W85, W85t, W91, W92 and W93 models
Water-cooled units
Water-cooled units
Water-cooled units
Water-cooled units
Connection plugs
Order No. Description Suitable for
8 980 131
8 980 133
8 980 135
8 980 136
External Pt100 connector
Standby connector 3 pin
Alarm connector 5 pin
REG+EPROG connector 6 pin
PRESTO PRESTO with electronic module
8 900 105 PRESTO PRESTO with electronic module
8 900 105
Interfaces / Software & Hardware
Order No.
8 900 105
8 900 020 Profibus DP Interface PRESTO
8 900 024 RS485 Interface PRESTO
8 980 771 Pressure sensor, 2 fittings M24 × 1.5 male (-95 ... +250 °C) PRESTO
8 980 772 Pressure sensor, 2 fittings M30 × 1.5 male (-95 ... +250 °C) PRESTO
8 980 773 Pressure sensor, 2 fittings M38 × 1.5 male (-95 ... +250 °C) PRESTO
8 970 815 Sight glass, -100…+280 °C, PN16/Class 230, 2 fittings M30 × 1.5 male PRESTO
8 901 102 EasyTEMP Software (free of charge at www.julabo.com) PRESTO
8 901 105 EasyTEMP Professional Software, incl. USB-Dongle PRESTO
9 900 112 USB 2.0 Repeater extension cable, length 5 m PRESTO
9 900 114 USB 2.0 Repeater extension cable, length 10 m PRESTO
Description Suitable for
Electronic module with analog connectors (Input, Output, Standby-In)
PRESTO
28
Calibration and manufacturer‘s certificates
Order No. Description Suitable for
8 903 035 Manufacturer‘s Testing Certificate for JULABO Units, Category 3 A30, A38, A40, W40,A41, W41
A45, A45t, W50, W50t, W55, W56, W56x,
8 903 045 Manufacturer‘s Testing Certificate for JULABO Units, Category 4
W58x, A70, A80, A80t, W80, W80t, A85, A85t, W85, W85t, A85, A85t, W85, W85t, W91, W91x, W91tt, W91ttx, W92, W92x, W92tt, W92ttx, W93, W93x
IQ/OQ Documentation
Order No. Description Suitable for
2 310 130 IQ/OQ Documentation, Category 3 A30, A38, A40, W40, A41, W41
A45, A45t, W50, W50t, W55, W56, W56x, W58x, A70,
2 310 140 IQ/OQ Documentation, Category 4
A80, A80t, W80, W80t, A85, A85t, W85, W85t, A85, A85t, W85, W85t, W91, W91x, W91tt, W91ttx, W92, W92x, W92tt, W92ttx, W93, W93x
Installation
Order No. Description Suitable for
2 320 103 Installation JULABO Units, Category 3 A30, A38, A40, W40, A41, W41
A45, A45t, W50, W50t, W55, W56, W56x,
2 320 104 Installation JULABO Units, Category 4
W58x, A70, A80, A80t, W80, W80t, A85, A85t, W85, W85t, A85, A85t, W85, W85t, W91, W91x, W91tt, W91ttx, W92, W92x, W92tt, W92ttx, W93, W93x
Booster Pump
Order No. Description Suitable for
8 810 020 Booster Pump (magnetically coupled), 2.1 bar (M30 × 1.5 male) PRESTO
flow control systems
Bestell-Nr. Bestelltext Einsetzbar für
S.4090.0008 Flow control solution MID DN 15 W55
S.4090.0010 Flow control solution MID DN 15 A45/A45t/W50/W50t
S.4090.0020 Flow control solution MID DN 25 A45/A45t/W50/W50t
S.4090.0022 Flow control solution MID DN 25 W55
S.4090.0023 Flow control solution MID DN 25 W56, W56x
S.4090.0025 Flow control solution MID DN 15 W56, W56x
29
FORTE HT
HIGH TEMPERATURES AND A HIGH SAFETY LEVEL
FORTE HT – for extremely high temperatures
High temperature circulators of the FORTE HT series are designed for temperature control in closed external systems. These compact units have a closed design that prevents the escape of oil vapors especially at high temperatures.
- High heating capacity for short heat-up times
- High pump capacity
- Small filling volume
- Cooling water connection for cold oil overlay
- Wide working temperature range without fluid change
- Extended lifetime of the fluid
- Easy to integrate into installations due to the modular concept (separation of circulator and operating panel)
- External Pt100 sensor connection
- Various interfaces
30
FORTE HT with cooling unit
The FORTE HT models with C.U. Cooling units are suitable for temperature control tasks from +40 °C and above. Running tap water through the cooling unit permits rapid cool-down across the entire temperature range. As a result, exothermic reactions can be immediately compensated, especially at high temperatures.
Additional benefits of models with C.U. cooling unit:
- Controlled cooling water supply for temperature applications from +40 °C
- High cooling capacity up to 15 kW (at +20 °C cooling water and +300 °C oil temperature)
- Rapid cooling
- Rapid temperature control i.e. of exothermic reactions
31
FORTE HT
FORTE HT
For working temperatures from +70 °C to +400 °C
High temperature circulators of the FORTE HT series are designed for temperature control in closed external systems. These compact units have a closed design that prevents the escape of oil vapors especially at high temperatures.
- High heating capacity for short heat-up times
- High pump capacity
- Small filling volume
- Cooling water connection for cold oil overlay
- Wide working temperature range without fluid change
- Extended lifetime of the fluid
- Easy to integrate into installations due to the modular concept (separation of circulator and operating panel)
- External Pt100 sensor connection
- Various interfaces
- Reduction of pump pressure via bypass (accessory)
  
Connections Control unit
RS232 / RS485 Analog input Standby input Alarm outputConnector for control
cable to HT Circulator
32
SAFE EVEN AT HIGH TEMPERATURES
FORTE HT high temperature circulators have a closed design that prevents the escape of oil vapors even at high temperatures.
FORTE HT30-M1
Order No. 9 800 031
Model HT30-M1
Working temperature range °C
Temperature stability °C ±0.01 … ±0.1
Cooling capacity kW, max. (Water +20 °C)
Heating capacity kW 3
Pump capacity Flow Rate / Pressure
Filling volume min. liters 2
Power requirement V/Hz 230 / 50 or 230 / 60
Dimensions Circulator cm
Dimensions Control unit cm
+70 … +400
-
l/min 14 … 18
bar 0.8 … 1.2
W × L × H 23 x 23 x 58
W × L × H 25 x 25 x 18
FORTE HT60-M2
Order No. 9 800 062
Model HT60-M2
Working temperature range °C
Temperature stability °C ±0.01 … ±0.1
Cooling capacity kW, max. (Water +20 °C)
Heating capacity kW 7
Pump capacity Flow Rate / Pressure
Filling volume min. liters 2
Power requirement V/Hz 3 x 400 / 50
Dimensions Circulator cm
Dimensions Control unit cm
+70 … +400
-
l/min 14 … 18
bar 0.8 … 1.2
W × L × H 23 x 23 x 58
W × L × H 25 x 25 x 18
FORTE HT60-M3
Order No. 9 800 063
Model HT60-M3
Working temperature range °C
Temperature stability °C ±0.01 … ±0.1
Cooling capacity kW, max. (Water +20 °C)
Heating capacity kW 6
Pump capacity Flow Rate / Pressure
Filling volume min. liters 2
Power requirement V/Hz 3 x 208 / 60
Dimensions Circulator cm
Dimensions Control unit cm
+70 … +400
-
l/min 14 … 18
bar 0.8 … 1.2
W × L × H 23 x 23 x 58
W × L × H 25 x 25 x 18
Heat-up time
Bath fluid: Thermal H
˚C
HT60-M2
+300
+250
+200
+150
+100
+50
0
__HT30-M1
___TW20
10 20
min
Pump capacity
Bath fluid: Thermal H
bar
1.2
0.8
___max.
0.4
min. with adapter__
5 10 15 l/min0
All data refers to the nominal voltage of 230 V, nominal frequency of 50 Hz (respectively 400 V, 3Ph., 50 Hz) and ambient temperature of +20 °C. Cooling capacity measured at max. pump stage. All pump data refers to a bath fluid with a specific density of 1 kg/dm³.
33
FORTE HT
FORTE HT with cooling unit
For working temperatures from +40 °C to +400 °C.
The FORTE HT models with C.U. Cooling unit are suitable for temperature control tasks at +40 °C and above. Running tap water through the cooling unit permits rapid cool-down across the entire temperature range. As a result, exothermic reactions can be immediately compensated, especially at high temperatures.
Additional benefits of models with C.U. cooling unit:
- Controlled cooling water supply for temperature applications from +40 °C
- High cooling capacity up to 15 kW (at +20 °C cooling water and +300 °C oil temperature)
- Rapid cooling
- Rapid temperature control i. e. of exothermic reactions
FORTE HT with cooling unit
FORTE HT high temperature circulators are designed for applications that require very high temperatures, as high as +400 °C. The closed design of FORTE HT avoids oil vapor contamination even at high temperatures. These units have automated heat-up, filling, and degassing features.
The figure shows the major components of high temperature circulators, with complete separation of circulator , control electronics , and C.U. cooling unit .
34
FORTE HT30-M1-C.U.
Order No. 9 800 035
Model HT30-M1-C.U.
Working temperature range °C
Temperature stability °C ±0.01 … ±0.1
Cooling capacity kW, max. (Water +20 °C)
Heating capacity kW 3
Pump capacity Flow Rate / Pressure
Filling volume min. liters 2
Power requirement V/Hz 230 / 50 or 230 / 60
Dimensions Circulator cm
Dimensions Control unit cm
+40 … +400
15
l/min 14 … 18
bar 0.8 … 1.2
W × L × H 43 x 23 x 58
W × L × H 25 x 25 x 18
FORTE HT60-M2-C.U.
Order No. 9 800 065
Model HT60-M2-C.U.
Working temperature range °C
Temperature stability °C ±0.01 … ±0.1
Cooling capacity kW, max. (Water +20 °C)
Heating capacity kW 7
Pump capacity Flow Rate / Pressure
Filling volume min. liters 2
Power requirement V/Hz 3 x 400 / 50
Dimensions Circulator cm
Dimensions Control unit cm
+40 … +400
15
l/min 14 … 18
bar 0.8 … 1.2
W × L × H 43 x 23 x 58
W × L × H 25 x 25 x 18
FORTE HT60-M3-C.U.
Order No. 9 800 066
Model HT60-M3-C.U.
Working temperature range °C
Temperature stability °C ±0.01 … ±0.1
Cooling capacity kW, max. (Water +20 °C)
Heating capacity kW 6
Pump capacity Flow Rate / Pressure
Filling volume min. liters 2
Power requirement V/Hz 3 x 208 / 60
Dimensions Circulator cm
Dimensions Control unit cm
+40 … +400
15
l/min 14 … 18
bar 0.8 … 1.2
W × L × H 43 x 23 x 58
W × L × H 25 x 25 x 18
Cool-down time
Bath fluid: Thermal H
+300
+250
HT30-M1-C.U. HT60-M2-C.U.
+200
HT60-M3-C.U.
+150
+100
+50
___TW20
10 20˚C min0
Reaction compensation
5 liter reactor | Bath fluid: Thermal H
A: Supply temperature B: Internal reactor
__A
+304
+302
+300
+298
+296
__B
temperature
___TW20
5 10 15˚C min0
All data refers to the nominal voltage of 230 V, nominal frequency of 50 Hz (respectively 400 V, 3Ph., 50 Hz) and ambient temperature of +20 °C. Cooling capacity measured at max. pump stage. All pump data refers to a bath fluid with a specific density of 1 kg/dm³.
HT30-M1-C.U. HT60-M2-C.U. HT60-M3-C.U.
35
Accessories
JULABO Thermal bath fluids
JULABO Thermal bath fluids are carefully selected and longterm tested. They are perfectly suited for temperature control tasks in temperature control systems and guarantee safe and reliable operation. Choosing the right thermal bath fluid is very important for achieving optimal temperature control results. The viscosity and thermal conductivity of our thermal bath fluids are designed especially for use with JULABO temperature control instruments.
Advantages
- Broad temperature ranges
- Low viscosity
- High stability
- Good thermal conductivity
- Almost odorless
- Long life
Working temperature range
+20 +250
+50 +350 Thermal H350
+40 +230
+300 °C0 °C +100 °C +200 °C
Thermal H250S
Thermal H300
Heating phaseWorking temperature range
36
Thermal H250S
Order No. 5 liters 8 940 133
Order No. 10 liters 8 940 132
Thermal H350
Order No. 5 liters 8 940 111
Order No. 10 liters --
Thermal H300
Order No. 5 liters 8 940 113
Order No. 10 liters -
Suitable for FORTE HT
Working temperature range °C
Flash point °C >+200
Fire point °C +264
Viscosity, (kinematic at +20 °C) mm
Density ( at +20 °C ) g/cm
Pour point °C -70
Boiling point °C +424
Ignition temperature °C +385
Color light brown
2
/s
3
+20 … +250
20
0.95
Suitable for FORTE HT
Working temperature range °C
Flash point °C +200
Fire point °C +235
Viscosity, (kinematic at +20 °C) mm
Density ( at +20 °C ) g/cm
Pour point °C -34
Boiling point °C +390
Ignition temperature °C +450
Color clear
2
/s
3
+50 …+350
48.3
1.04
Suitable for FORTE HT
Working temperature range °C
Flash point °C +245
Fire point °C +255
Viscosity, (kinematic at +20 °C) mm
Density ( at +20 °C ) g/cm
Pour point °C -18
Boiling point °C +380
Ignition temperature °C +330
Color clear
2
/s
3
+40 … +300
76.5
0.858
JULABO Thermal bath fluids based on silicone …
… are chemically inert substances which do not affect metals like iron, copper, zinc, aluminum, chrome or nickel. Compared to other fluids, JULABO Thermal fluids have an extraordinarily low electrical conductivity. When properly stored, the fluids will last for 12 months and longer as they are not susceptible to climatic influences.
JULABO Thermal bath fluids based on water-glycol …
… (monoethyleneglycol with anti-corrosion additives) have excellent thermal characteristics and a low viscosity. In addition, they provide anti-freeze protection, i.e. they can be applied at temperatures below the freezing point of water.
More information on JULABO Thermal bath fluids …
… in our brochure ‚Thermal Bath Fluids‘ at www.julabo.com.
37
Accessories
External Pt100 sensors / Extention Cable
Order No. Description Suitable for
8 981 003 200 × 6 mm dia., stainless steel, 1.5 m cable FORTE HT
8 981 006 20 × 2 mm dia., stainless steel, 1.5 m cable FORTE HT
8 981 010 300 × 6 mm dia., stainless steel, 1.5 m cable FORTE HT
8 981 017 200 × 6 mm dia., stainless steel/PTFE coated, 3.0 m cable FORTE HT
8 981 015 300 × 6 mm dia., stainless steel/PTFE coated, 3.0 m cable FORTE HT
8 981 013 600 × 6 mm dia., stainless steel/PTFE coated, 3.0 m cable FORTE HT
8 981 016 900 × 6 mm dia., stainless steel/PTFE coated, 3.0 m cable FORTE HT
8 981 014 1200 × 6 mm dia., stainless steel/PTFE coated, 3.0 m cable FORTE HT
8 981 020 M+R in-line Pt100 sensor, 2 fittings M16x1 male FORTE HT
8 981 103 Extension cable 3.5 m for Pt100 sensor FORTE HT
Accessories for FORTE HT
Order No. Description Suitable for
9 790 100 C.U. cooling unit FORTE HT
8 970 802 Adapter for pump pressure reduction (0.8 bar) FORTE HT
8 970 811 Level indicator (with sight glass) FORTE HT
8 970 435 Handle for stand rod attachment
8 970 801 Expansion vessel (1 liter)
8 980 125 Extension cable 5 m (control electronics for HT circulator)
8 980 704 Solenoid valve for cooling water with 2 m tubing 8 mm inner dia.
FORTE HT
FORTE HT
FORTE HT
FORTE HT (without C.U. cooling unit)
Metal tubing
Order No. Description Suitable for
Metal tubing flexible, triple insulated, -100 °C to +350 °C
8 930 209 0.5 m Metal tubing, 2 fittings M16 × 1 female
8 930 210 1.0 m Metal tubing, 2 fittings M16 × 1 female
8 930 211 1.5 m Metal tubing, 2 fittings M16 × 1 female
8 930 214 3.0 m Metal tubing, 2 fittings M16 × 1 female
FORTE HT
FORTE HT
FORTE HT
FORTE HT
38
Metal tubing flexible, insulated, -50 °C to +200 °C
8 930 220 0.5 m Metal tubing, 2 fittings M16 × 1 female
8 930 221 1.0 m Metal tubing, 2 fittings M16 × 1 female
8 930 222 1.5 m Metal tubing, 2 fittings M16 × 1 female
8 930 223 3.0 m Metal tubing, 2 fittings M16 × 1 female
Accessories for connecting metal tubing
8 970 443 Adapter M16 × 1 male to M16 × 1 male
FORTE HT
FORTE HT
FORTE HT
FORTE HT
FORTE HT
Adapters / Valves / Connectors etc.
Order No. Description Suitable for
8 970 457 Shut-off valve for loop circuit (-30 °C ... +200 °C), M16 × 1 FORTE HT
8 970 490 2 Collar nuts M16 × 1 female FORTE HT
8 970 442 2 Elbow fittings 90°, M16 × 1 female/male, side length 2 × 54 mm
8 970 448
8 890 004 2 Adapters M16 × 1 female to NPT 1/4" male
8 890 005 2 Adapters M16 × 1 female to NPT 1/4" female
8 890 006 2 Adapters M16 × 1 female to NPT 3/8" male
8 890 007 2 Adapters M16 × 1 female to NPT 3/8" female
8 890 008 2 Adapters M16 × 1 female to NPT 1/2" male
8 890 009 2 Adapters M16 × 1 female to NPT 1/2" female
8 890 010 2 Adapters M16 × 1 male to NPT 1/4" female
8 891 008 1 Adapter M16 × 1 male to BSP 1/2" female
8 891 009 1 Adapter M16 × 1 male to BSP 3/4" female
8 890 011 2 Adapters M16 × 1 female to tube 1/4" male
8 890 012 2 Adapters M16 × 1 female to tube 3/8" male
8 890 013 2 Adapters M16 × 1 female to tube 1/2" male
8 890 024 2 Adapters M16 × 1 female to M16 × 1 female FORTE HT
2 Elbow fittings 90°, M16 × 1 female/male, side length 2 × 54 mm / 2 × 120 mm
FORTE HT
FORTE HT
FORTE HT
FORTE HT
FORTE HT
FORTE HT
FORTE HT
FORTE HT
FORTE HT
FORTE HT
FORTE HT
FORTE HT
FORTE HT
FORTE HT
Connection plugs
Order No. Description Suitable for
8 980 131 External Pt100 connector FORTE HT
8 980 133 Standby connector 3 pin FORTE HT
8 980 135 Alarm connector 5 pin FORTE HT
8 980 136 REG+EPROG connector 6 pin FORTE HT
39
JULABO advantages
The advantages at a glance.
JULABO temperature control solutions – high-precision and speed
JULABO products include high-quality temperature control solutions to cover the temperature range -95 °C to +400 °C.
Refrigerated circulators
JULABO refrigerated circulators are suit­able for internal and external applications and can be used within the temperature range
-95 °C to +200 °C.
Heating circulators
Heating circulators are available in various designs including heating immersion circulators, heating circulators with open bath, and heating circulators to cover a temperature range from +20 °C to +300 °C.
Highly dynamic temperature control systems
The highly dynamic temperature control systems from JULABO can be used for demand­ing temperature applications ranging from
-93 °C to +400 °C. The PRESTO series offers unique high-performance specifi cations to meet these requirements.
Water baths and shaking water baths
JULABO water baths and shaking water baths can be used for a variety of applications within the temperature range +18 °C to +99.9 °C.
Additional products
In addition, the JULABO product portfolio offers instruments for special requirements such as calibration baths, beer forcing test baths, im­mersion / fl ow-through coolers and temperature controllers.
Wireless communication & software solutions
JULABO facilitates the automation of applications. The temperature control instruments can be comfortably controlled and monitored via PC.
40
Recirculating coolers
The high degree of effi ciency of JULABO recirculating coolers makes them an environ­mentally-friendly and economic alternative to tap water cooling in the temperature range
-25 °C to +130 °C.
Comprehensive service and on-site support
JULABO takes pride in offering customers expert advice for pairing the proper JULABO temperature control solution to their specifi c application. JULABO service and support options include install­ation and calibration, equipment qualifi cation documentation and application training. These invaluable services ensure customer confi dence in the operation and maintenance of any JULABO unit.
Accessories
An extensive range of accessories allows for adaptation of JULABO products for research and industry use.
Custom requirements - custom products
JULABO’s wide range of products provide a solution for almost any application. If no standard product can be used for a specifi c requirement, our specialists will work out a custom solution together with you.
JULABO. Quality.
Highest quality standards to ensure a long product life.
Green technology.
Deliberately engineered with environmentally friendly materials and technologies.
Satisfi ed customers.
11 subsidiaries and more than 100 partners worldwide guarantee fast and qualifi ed JULABO support.
Quality
Assurance
100 % checked.
100 % testing. 100 % quality. Every JULABO product is shipped to customers after a successful fi nal inspection.
Quick start.
Individual JULABO consultation and detailed manuals get your instruments up and running on site.
Services 24/7.
Around the clock availability. You can fi nd suitable accessories, data sheets, manuals, case studies and more at www.julabo.com.
41
Technical Specifications
PRESTO Highly Dynamic Temperature Control Systems | Process Circulators
Model Order No. Working
temperature range
°C
Display / display resolution
Temp. control
Temperature stabillity
°C
Heating capacity
kW
Cooling of refrige­ration unit
Cooling capacity kW
(Medium: JULABO Thermal | Ethanol)
in °C
+200 +20 0 -20 -30 -40 -60 -80
A30 9 420 300 -30 ... +250 5.7“ TFT /±0.01°C ICC ±0.01 ... ±0.05 2.7 1-st. Air 0.5 0.5 0.4 0.2 0.02 - - - 0.5 25 M24 × 1.5 50 2.4 (1.4) 1.5 III (FL) 230/50/15 - 54 - - 8 × 60 yes Accessory yes Accessory - +5 ... +40 25 × 59 × 62 62 A30 A38 9 420 381.N1 -45 ... +250 5.7“ TFT /±0.01°C ICC ±0.01 ... ±0.05 2.7 1-st. Air 0.79 0.79 0.73 0.44 0.28 0.05 - - 0.1 ... 1.6 50 M24 × 1.5 50 3.5 (1.7) 2.7 III (FL) 230/50/16 - 60 - - 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 33 × 75 × 67 80 A38 A40 9 420 401 -40 ... +250 5.7“ TFT /±0.01°C ICC ±0.01 ... ±0.05 2.7 1-st. Air 1.2 1.2 0.9 0.4 0.15 - - - 0.1 ... 1.7 40 M24 × 1.5 50 3.5 (1.7) 2.7 III (FL) 230/50-60/16 - 55 - - 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 33 × 59 × 67 79 A40 W40 9 421 401 -40 ... +250 5.7“ TFT /±0.01°C ICC ±0.01 ... ±0.05 2.7 1-st. Water 1.2 1.2 1 0.4 0.12 - - - 0.1 ... 1.7 40 M24 × 1.5 50 3.5 (1.7) 2.7 III (FL) 230/50-60/16 G 3/4“ 53 1 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 33 × 59 × 67 78 W40 A41 9 420 411.N1 -45 ... +250 5.7“ TFT /±0.01°C ICC ±0.01 ... ±0.05 2.7 1-st. Air 1.33 1.33 1.24 0.46 0.31 0.07 - - 0.1 ... 1.6 50 M24 × 1.5 50 3.5 (1.7) 2.7 III (FL) 230/50/16 - 60 - - 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 33 × 75 × 67 80 A41 W41 9 421 411.N1 -45 ... +250 5.7“ TFT /±0.01°C ICC ±0.01 ... ±0.05 2.7 1-st. Water 1.33 1.33 1.24 0.46 0.31 0.07 - - 0.1 ... 1.6 50 M24 × 1.5 50 3.5 (1.7) 2.7 III (FL) 230/50/17 G 3/4“ 60 1 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 33 × 75 × 67 83 W41 A45 9 420 452 -45 ... +250 5.7“ TFT /±0.01°C ICC ±0.05 ... ±0.1 6 1-st. Air 3.4 3.5 3.3 1.8 1 0.3 - - 0.1 ... 3.0 80 M30 × 1.5 50 7.5 (3.5) 7.5 III (FL) 3 × 400/50/13 - 69 - - 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 53 × 66.5 × 126 210 A45 A45t 9 420 452.T -45 ... +250 5.7“ TFT /±0.01°C ICC ±0.05 ... ±0.1 12 1-st. Air 3.4 3.5 3.3 1.8 1 0.3 - - 0.1 ... 3.0 80 M30 × 1.5 50 7.5 (3.5) 7.5 III (FL) 3 × 400/50/22 - 69 - - 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 53 × 66.5 × 126 210 A45t W50 9 421 502 -50 ... +250 W50t 9 421 502.T -50 ... +250 W55 9 421 552 -55 ... +250 W56 9 421 562 -56 ... +250 W56x W58x A70
9 421 563 9 421 583.S1 9 420 701.N1
-50
...
-50 ... +250
-75
...
5.7“ TFT /±0.01°C
5.7“ TFT /±0.01°C
5.7“ TFT /±0.01°C
5.7“ TFT /±0.01°C
+250
5.7“ TFT /±0.01°C ICC ±0.05 ... ±0.1
ICC ICC ICC ICC
5.7“ TFT /±0.01°C ICC ±0.05 ... ±0.1
+250
5.7“ TFT /±0.01°C ICC ±0.01 ... ±0.05
±0.05 ... ±0.1 ±0.05 ... ±0.1 ±0.05 ... ±0.1 ±0.05 ... ±0.1
6 1-st. Water
7.0 7.5 6.5 2.8 1.6 0.6 - - 0.1 ... 3.0 80 M30 × 1.5 50 7.5 (3.5) 7.5 III (FL) 3 × 400/50/16 G 3/4“ 65 8 ... 12 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 53 × 66.5 × 126 210 W50 12 1-st. Water 7.0 7.5 6.5 3.0 1.8 0.6 - - 15 1-st. Water 27 1-st. Water 27
1-st. Water 19
27
1-st. Water 24
1.8
2-st. Air
13.5 15 10 4 2.5 1.2 19 25.8 23.1 11.5 7.1 3.5
25.8 23.1 11.5 7.1 3.5 33 32 19 12 7
1.3 1 0.91 0.84 0.79 0.75
- -
- -
- -
- -
0.38 -
A80 9 420 801 -80 ... +250 5.7“ TFT /±0.01°C ICC ±0.01 ... ±0.05 1.8 2-st. Air 1.2 1.2 1.2 1.1 1.1 1.1 0.65 0.1 0.1 ... 1.7 40 M24 × 1.5 50 3.9 (1.7) 5.6 III (FL) 230/50/16 - 68 - - 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 43 × 65 × 126 164 A80 A80t 9 420 801.T -80 ... +250 5.7“ TFT /±0.01°C ICC ±0.01 ... ±0.05 3.4 2-st. Air 1.2 1.2 1.2 1.1 1.1 1.1 0.65 0.1 0.1 ... 1.7 40 M24 × 1.5 50 3.9 (1.7) 5.6 III (FL) 3 × 400/50/16 - 68 - - 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 43 × 65 × 126 167 A80t W80 9 421 801 -80 ... +250 5.7“ TFT /±0.01°C ICC ±0.01 ... ±0.05 1.8 2-st. Water 1.2 1.2 1.2 1.1 1.1 1.1 0.65 0.1 0.1 ... 1.7 40 M24 × 1.5 50 3.9 (1.7) 5.6 III (FL) 230/50/16 G 3/4“ 64 2 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 43 × 65 × 126 159 W80 W80t 9 421 801.T -80 ... +250 5.7“ TFT /±0.01°C ICC ±0.01 ... ±0.05 3.4 2-st. Water 1.2 1.2 1.2 1.1 1.1 1.1 0.65 0.1 0.1 ... 1.7 40 M24 × 1.5 50 3.9 (1.7) 5.6 III (FL) 3 × 400/50/16 G 3/4“ 64 2 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 43 × 65 × 126 164 W80t A85 9 420 852 -85 ... +250 5.7“ TFT /±0.01°C ICC ±0.05 ... ±0.1 6 2-st. Air 2.8 2.5 2.4 2.4 2.4 2.4 2.2 0.4 0.1 ... 3.0 80 M30 × 1.5 50 9.5 (5) 7 III (FL) 3 × 400/50/18 - 69 - - 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 61 × 108 × 125 365 A85 A85t 9 420 852.T -85 ... +250 5.7“ TFT /±0.01°C ICC ±0.05 ... ±0.1 15 2-st. Air 2.8 2.5 2.4 2.4 2.4 2.4 2.2 0.4 0.1 ... 3.0 80 M30 × 1.5 50 9.5 (5) 7 III (FL) 3 × 400/50/31 - 69 - - 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 61 × 108 × 125 365 A85t W85 9 421 852 -85 ... +250 5.7“ TFT /±0.01°C ICC ±0.05 ... ±0.1 6 2-st. Water 2.8 2.5 2.4 2.4 2.4 2.4 2.2 0.4 0.1 ... 3.0 80 M30 × 1.5 50 9.5 (5) 7 III (FL) 3 × 400/50/18 W85t 9 421 852.T -85 ... +250 5.7“ TFT /±0.01°C ICC ±0.05 ... ±0.1 15 2-st. Water 2.8 2.5 2.4 2.4 2.4 2.4 2.2 0.4 0.1 ... 3.0 80 M30 × 1.5 50 9.5 (5) 7 III (FL) 3 × 400/50/31 G 3/4“ 69 2 ... 6 W91 9 421 912 -91 ... +250 5.7“ TFT /±0.01°C ICC ±0.05 ... ±0.2 18 2-st. Water 11 11 11 11 10.5 10.5 8 2 0.1 ... 3.0 80 M38 × 1.5 50 28 (16) 40 III (FL) 3 × 400/50/43 G 3/4“ 74 16 ... 43 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 95 × 127 × 190 870 W91 W91tt 9 421 912.TT -91 ... +250 5.7“ TFT /±0.01°C ICC ±0.05 ... ±0.2 36 2-st. Water 11 11 11 11 10.5 10.5 8 2 0.1 ... 3.0 80 M38 × 1.5 50 28 (16) 40 III (FL) 3 × 400/50/76 G 3/4“ 74 16 ... 43 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 95 × 127 × 190 W91x 9 421 913 -91 ... +250 5.7“ TFT /±0.01°C ICC ±0.05 ... ±0.2 18 2-st. Water 11 11 11 11 10.5 10.5 8 2 0.1 ... 5.5 70 M38 × 1.5 70 28 (16) 40 III (FL) 3 × 400/50/46 G 3/4“ 74 16 ... 43 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 95 × 127 × 190 W91ttx 9 421 913.TT -91 ... +250 5.7“ TFT /±0.01°C ICC ±0.05 ... ±0.2 36 2-st. Water 11 11 11 11 10.5 10.5 8 2 0.1 ... 5.5 70 M38 × 1.5 70 28 (16) 40 III (FL) 3 × 400/50/76 G 3/4“ 74 16 ... 43 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 95 × 127 × 190 W92 9 421 922 -92 ... +250 5.7“ TFT /±0.01°C ICC ±0.05 ... ±0.2 18 2-st. Water 31 27 20 11 10.5 10.5 8 2 0.1 ... 3.0 80 M38 × 1.5 50 28 (16) 40 III (FL) 3 × 400/50/43 G 3/4“ 74 16 ... 43 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 95 × 127 × 190 W92tt 9 421 922.TT -92 ... +250 5.7“ TFT /±0.01°C ICC ±0.05 ... ±0.2 36 2-st. Water 31 27 20 11 10.5 10.5 8 2 0.1 ... 3.0 80 M38 × 1.5 50 28 (16) 40 III (FL) 3 × 400/50/66 G 3/4“ 74 16 ... 43 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 95 × 127 × 190 W92x 9 421 923 -92 ... +250 5.7“ TFT /±0.01°C ICC ±0.05 ... ±0.2 18 2-st. Water 31 27 20 11 10.5 10.5 8 2 0.1... 5.5 70 M38 × 1.5 70 28 (16) 40 III (FL) 3 × 400/50/46 G 3/4“ 74 16 ... 43 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 95 × 127 × 190 W92ttx 9 421 923.TT -92 ... +250 5.7“ TFT /±0.01°C ICC ±0.05 ... ±0.2 36 2-st. Water 31 27 20 11 10.5 10.5 8 2 0.1 ... 5.5 70 M38 × 1.5 70 28 (16) 40 III (FL) 3 × 400/50/66 G 3/4“ 74 16 ... 43 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 95 × 127 × 190 W93 9 421 932.N1 -93 ... +250 5.7“ TFT /±0.01°C ICC ±0.05 ... ±0.2 27 2-st. Water - 19.5 19.5 19.5 19.5 19.5 13 3.5 0.1 ... 3.0 80 M38 × 1.5 50 14 (16) 40 III (FL) 400/50/125 G 3/4“ 69 9 ... 30 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 93 × 148 × 192 920 W93 W93x 9 421 933.N1 -93 ... +250 5.7“ TFT /±0.01°C ICC ±0.05 ... ±0.2 27 2-st. Water - 19.5 19.5 19.5 19.5 19.5 13 3.5 0.1 ... 5.5 70 M38 × 1.5 70 14 (16) 35 III (FL) 400/50/125 G 3/4“ 69 9 ... 30 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 93 × 148 × 192 930 W93x
FORTE HT High Temperature Circulators
Model Order No. Working
temperature range °C
HT30-M1 9 800 031 +70 ... +400 0.01 ICC ±0.01 ... ±0.1 3 - 0.8 - 1.2 14 - 18 M16 × 1 2 1.6+0.9 III (FL) IP21 230/50/15 23 × 23 × 58 25 × 25 × 18 27 HT30-M1
HT60-M2 9 800 062 +70 ... +400 0.01 ICC ±0.01 ... ±0.1 7 - 0.8 - 1.2 14 - 18 M16 × 1 2 1.6+0.9 III (FL) IP21 3 × 400/50/11 23 × 23 × 58 25 × 25 × 18 29 HT60-M2
HT60-M3 9 800 063 +70 ... +400 0.01 ICC ±0.01 ... ±0.1 6 - 0.8 - 1.2 14 - 18 M16 × 1 2 1.6+0.9 III (FL) IP21 3 × 208/60/18 23 × 23 × 58 25 × 25 × 18 29 HT60-M3
HT30-M1-C.U. 9 800 035 +40 ... +400 0.01 ICC ±0.01 ... ±0.1 3 yes 15 0.8 - 1.2 14 - 18 M16 × 1 2 1.6+0.9 III (FL) IP21 230/50/15 43 × 23 × 58 25 × 25 × 18 35 HT30-M1-C.U.
HT60-M2-C.U. 9 800 065 +40 ... +400 0.01 ICC ±0.01 ... ±0.1 7 yes 15 0.8 - 1.2 14 - 18 M16 × 1 2 1.6+0.9 III (FL) IP21 3 × 400/50/11 43 × 23 × 58 25 × 25 × 18 37 HT60-M2-C.U.
HT60-M3-C.U. 9 800 066 +40 ... +400 0.01 ICC ±0.01 ... ±0.1 6 yes 15 0.8 - 1.2 14 - 18 M16 × 1 2 1.6+0.9 III (FL) IP21 3 × 208/60/18 43 × 23 × 58 25 × 25 × 18 37 HT60-M3-C.U.
Unless otherwise indicated, all data relates to the operation at nominal voltage and frequency and +20 °C ambient temperature. Cooling capacity measured according to DIN 12876-2. Information about used refrigerants and regulatory requirements regarding installation site, operation, transport or disposal of devices with natural refrigerants can be found at www.julabo.com
42
Setting / display resolution °C
Temperature control
Temperature stability external °C
Heating capacity
kW
-80
Type
Gear
Centrifugal
Pump Pump
Pressure
bar
max. Pump capacity l/min
connec­tions
male
Viscosity max.
cSt.
Process volume min. (active heat exchanger volume) liters
Internal usable expansi­on volu­me liters
Classification acc. to DIN 12876-1
Power requirement
V/Hz/A
Cooling water connection w. barbed fitting for tubing ½‘‘ lD Inch
Noise level (distance 1 m)
dbA
Cooling water consumption
l/min
- 0.1 ... 1.6 50 M24 × 1.5 50 3.5 (1.7) 2.7 III (FL) 230/50/16 - 60 - - 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 33 × 75 × 67 80 A38
- 0.1 ... 1.7 40 M24 × 1.5 50 3.5 (1.7) 2.7 III (FL) 230/50-60/16 - 55 - - 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 33 × 59 × 67 79 A40
- 0.1 ... 1.7 40 M24 × 1.5 50 3.5 (1.7) 2.7 III (FL) 230/50-60/16 G 3/4“ 53 1 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 33 × 59 × 67 78 W40
- 0.1 ... 1.6 50 M24 × 1.5 50 3.5 (1.7) 2.7 III (FL) 230/50/16 - 60 - - 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 33 × 75 × 67 80 A41
- 0.1 ... 1.6 50 M24 × 1.5 50 3.5 (1.7) 2.7 III (FL) 230/50/17 G 3/4“ 60 1 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 33 × 75 × 67 83 W41
- 0.1 ... 3.0 80 M30 × 1.5 50 7.5 (3.5) 7.5 III (FL) 3 × 400/50/13 - 69 - - 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 53 × 66.5 × 126 210 A45
- 0.1 ... 3.0 80 M30 × 1.5 50 7.5 (3.5) 7.5 III (FL) 3 × 400/50/22 - 69 - - 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 53 × 66.5 × 126 210 A45t
0.1 ... 3.0 80 M30 × 1.5 50 7.5 (3.5) 7.5 III (FL) 3 × 400/50/25 G 3/4“ 65 8 ... 12 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 53 × 66.5 × 126 210 W50t
0.1 ... 3.0 80 M30 × 1.5
0.1 ... 3.0 80 M38 × 1.5
0.1 ... 5.5 70 M38 × 1.5 70
0.1 ... 5.5 70 M38 × 1.5 280
0.1 ... 1.7 40 M24 × 1.5 50
50 11.5 (7) 7.5 50 11 (10) 17.5
11 (10) 17.5 13 (12) 17.5
3.9 (1.7) 8
III (FL) 3 × 400/50/32 G 3/4“ 65 8 ... 12 0.5 8 × 60 III (FL) 3 × 400/50/47 G 3/4“ 72 14 ... 25 0.5 8 × 60 III (FL) 3 × 400/50/47 G 3/4“ 72 14 ... 25 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 III (FL) 3 × 400/50/54 G 3/4“ 72 21 ... 28 1.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 III (FL) 230/50/16 - 69 - - 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40
0.1 0.1 ... 1.7 40 M24 × 1.5 50 3.9 (1.7) 5.6 III (FL) 3 × 400/50/16 - 68 - - 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 43 × 65 × 126 167 A80t
0.1 0.1 ... 1.7 40 M24 × 1.5 50 3.9 (1.7) 5.6 III (FL) 230/50/16 G 3/4“ 64 2 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 43 × 65 × 126 159 W80
0.1 0.1 ... 1.7 40 M24 × 1.5 50 3.9 (1.7) 5.6 III (FL) 3 × 400/50/16 G 3/4“ 64 2 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 43 × 65 × 126 164 W80t
0.4 0.1 ... 3.0 80 M30 × 1.5 50 9.5 (5) 7 III (FL) 3 × 400/50/18 - 69 - - 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 61 × 108 × 125 365 A85
0.4 0.1 ... 3.0 80 M30 × 1.5 50 9.5 (5) 7 III (FL) 3 × 400/50/31 - 69 - - 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 61 × 108 × 125 365 A85t
0.4 0.1 ... 3.0 80 M30 × 1.5 50 9.5 (5) 7 III (FL) 3 × 400/50/18
G 3/4“ 69 2 ... 6 0.5
0.4 0.1 ... 3.0 80 M30 × 1.5 50 9.5 (5) 7 III (FL) 3 × 400/50/31 G 3/4“ 69 2 ... 6 2 0.1 ... 3.0 80 M38 × 1.5 50 28 (16) 40 III (FL) 3 × 400/50/43 G 3/4“ 74 16 ... 43 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 95 × 127 × 190 870 W91 2 0.1 ... 3.0 80 M38 × 1.5 50 28 (16) 40 III (FL) 3 × 400/50/76 G 3/4“ 74 16 ... 43 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 95 × 127 × 190 2 0.1 ... 5.5 70 M38 × 1.5 70 28 (16) 40 III (FL) 3 × 400/50/46 G 3/4“ 74 16 ... 43 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 95 × 127 × 190 2 0.1 ... 5.5 70 M38 × 1.5 70 28 (16) 40 III (FL) 3 × 400/50/76 G 3/4“ 74 16 ... 43 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 95 × 127 × 190 2 0.1 ... 3.0 80 M38 × 1.5 50 28 (16) 40 III (FL) 3 × 400/50/43 G 3/4“ 74 16 ... 43 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 95 × 127 × 190 2 0.1 ... 3.0 80 M38 × 1.5 50 28 (16) 40 III (FL) 3 × 400/50/66 G 3/4“ 74 16 ... 43 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 95 × 127 × 190 2 0.1... 5.5 70 M38 × 1.5 70 28 (16) 40 III (FL) 3 × 400/50/46 G 3/4“ 74 16 ... 43 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 95 × 127 × 190 2 0.1 ... 5.5 70 M38 × 1.5 70 28 (16) 40 III (FL) 3 × 400/50/66 G 3/4“ 74 16 ... 43 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 95 × 127 × 190
3.5 0.1 ... 3.0 80 M38 × 1.5 50 14 (16) 40 III (FL) 400/50/125 G 3/4“ 69 9 ... 30 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 93 × 148 × 192 920 W93
3.5 0.1 ... 5.5 70 M38 × 1.5 70 14 (16) 35 III (FL) 400/50/125 G 3/4“ 69 9 ... 30 0.5 8 × 60 yes Accessory yes Accessory Accessory +5 ... +40 93 × 148 × 192 930 W93x
Integrated cooling unit
C.U.
- 0.8 - 1.2 14 - 18 M16 × 1 2 1.6+0.9 III (FL) IP21 3 × 400/50/11 23 × 23 × 58 25 × 25 × 18 29 HT60-M2
- 0.8 - 1.2 14 - 18 M16 × 1 2 1.6+0.9 III (FL) IP21 3 × 208/60/18 23 × 23 × 58 25 × 25 × 18 29 HT60-M3
yes 15 0.8 - 1.2 14 - 18 M16 × 1 2 1.6+0.9 III (FL) IP21 230/50/15 43 × 23 × 58 25 × 25 × 18 35 HT30-M1-C.U.
yes 15 0.8 - 1.2 14 - 18 M16 × 1 2 1.6+0.9 III (FL) IP21 3 × 400/50/11 43 × 23 × 58 25 × 25 × 18 37 HT60-M2-C.U.
yes 15 0.8 - 1.2 14 - 18 M16 × 1 2 1.6+0.9 III (FL) IP21 3 × 208/60/18 43 × 23 × 58 25 × 25 × 18 37 HT60-M3-C.U.
Cooling capacity (Water, +20 °C)
kW, max.
Pump capacity Pump connections
Pressure bar
Flow rate l/min.
male
Filling volume
liters
Filling volume expansion vessel
liters
Classification acc. to
DIN 12876-1
43
Cooling water differential pressure min. bar
Integrated programmer
steps
External Pt100 sensor connec­tion
yes yes
Analog inputs / outputs
RS232, SD­Card, USB, Ethernet, alarm output
Digital interfaces Permissible
RS485 Profibus
2nd external Pt100 sensor
ambient temperature
°C
Accessory yes Accessory Accessory +5 ... +40 Accessory yes Accessory Accessory +5 ... +40
Dimensions W × L × H
cm
Weight
net
kg
Model
61 × 84.5 × 125 288 W55 60 × 94 × 164 385 W56 60 × 94 × 164 70 × 108 × 174 57 × 74.5 × 88
385 486 150
W56x W58x A70
0.5
8 × 60 8 × 60
yes
Accessory yes Accessory Accessory +5 ... +40 61 × 84.5 × 125 335 W85
yes
Accessory yes Accessory Accessory +5 ... +40 61 × 84.5 × 125 335 W85t
870 870 870 870 870 870 870
IP Class acc. to IEC 60529
IP21 230/50/15 23 × 23 × 58 25 × 25 × 18 27 HT30-M1
Power requirement
V / Hz / A
Dimensions Circulator W × L × H
cm
Dimensions Control unit W × L × H cm
Weight net
kg
Model
W91tt W91x W91ttx W92 W92tt W92x W92ttx
Unless otherwise indicated, all data relates to the operation at nominal voltage and frequency and +20 °C ambient temperature. Cooling capacity measured according to DIN 12876-2. Information about used refrigerants and regulatory requirements regarding installation site, operation, transport or disposal of devices with natural refrigerants can be found at www.julabo.com
4443
Voltage Options
PRESTO
Model
voltage
(V)
Single phase units
Rated
A30
200 - 230 50 1 2.1 - 2.7
208 60 1 2.3
Frequency
(Hz)
Mains power
supply type
Voltage range
(V)
180 190 200 210 220 230 240 250 260
Heating
capacity at rated
voltage (kW)
A38 230 50 1 2.7
A40 W40
A41 W41
200 - 230 50-60 1 2.1 - 2.7
208 60 1 2.3
230 50 1 2.7
230 50 1 2.7
A70 230 50 1 1.8
A80 W80
Model
Three phase units:
230 50 1 1.8
208 60 1 1.5
Rated
voltage
(V)
Frequency
(Hz)
Mains power
supply type
Voltage range
(V)
Heating
capacity at rated
voltage (kW)
180 220 260 300 340 380 420 460 500
3 × 400 50 2 6
A45 W50
3 × 230 50 3 6
3 × 208 - 230 60 3 5.5 - 6
3 × 400 50 2 12
A45t W50t
3 × 230 50 3 12
3 × 208 - 230 60 3 10 - 12
W55
W56 (x) W58x
3 × 400 50 2 15
3 × 208 - 230 60 3 15
3 × 400 50 3 27
3 × 480 60 3 27
3 × 400 50 2 3.4
A80t W80t
3 × 230 50 3 3.4
3 × 208 - 220 60 3 2.8 - 3.1
3 × 400 50 2 6
A85 W85
3 × 230 50 3 6
3 × 208 - 230 60 3 5.5 - 6
3 × 400 50 2 15
A85t W85t
3 × 230 50 3 15
3 × 208 - 230 60 3 12.5 - 15
W91 (x) W92 (x)
W91tt (x) W92tt (x)
W93 W93 (x)
3 × 400 50 2 18
3 × 480 60 3 18
3 × 400 50 2 36
3 × 480 60 3 36
3 × 400 50 2 27
3 × 400 50 2 27
Mains power supply type
1
L1 L1L
N
L2 L2
L3 L3
N
PE PEPE
32
rated Voltage
operating Voltage
Unless otherwise indicated, all data related to the operation at nominal voltage and frequency and +20 °C ambient temperature. Cooling capacity measured according to DIN12876-2.
45
GERMAN Headquarters
JULABO GmbH
Gerhard-Juchheim-Strasse 1 77960 Seelbach Germany
Tel. +49 7823 51-0 info.de@julabo.com www.julabo.com
ITALY
JULABO Italia SRL www.julabo.com
UK
JULABO UK, Ltd. www.julabo.com
FRANCE
JULABO France SAS www.julabo.com
NETHERLANDS
JULABO Nederland B.V. www.julabo.com
SWITZERLAND
JULABO Switzerland LLC www.julabo.com
NORTH AMERICA
JULABO USA, Inc. www.julabo.us
JAPAN
JULABO Japan Co., Ltd. www.julabo-japan.co.jp
KOREA
JULABO Korea Co., Ltd. www.julabo-korea.co.kr
CHINA
JULABO Technology (Beijing) Co., Ltd. www.julabo.com.cn
LATIN AMERICA
JULABO Latin America www.julabo-latinamerica.com
SINGAPORE
JULABO Singapore Pte., Ltd. www.julabo.com
INDIA
JULABO India www.julabo.com
Plus more than 100 partner distributors worldwide
Changes without prior notification reserved | Printed in Germany | JULABO No.1.931.1505/0225
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use