Page 1
1. Packing List
1. Prestigio MultiPad
2. AC Adapter
3. Carrying Case
4. USB Cable
5. Quick Start Guide
7. Legal and Safety Notices
6. Warranty Card
8. OTG cable
Quick Start Guide
Prestigio MultiPad
PMP7100D3G_DUO
EN
1 2 4
7
12
10 9 6
11
5 8 3
2. Device Overview
PMP7100D3G_DUO EN - 1
Page 2
Power
Turn on/off the device;
Suspend/Activate the device
Vol +\ Vol - Button
Adjust the volume level.
Built-in Microphone
Record sounds.
Earphone Jack
Earphones connection.
SIM Card Slot
Insert SIM card
USB port
USB connection
HDMI
HDMI cable connection
DC port
AC adapter connection
Front Camera
Take photos or video chat
Micro SD Card Slot
Insert the Micro SD card
Speaker
Emit the voice
Rear Camera
Take photos.
Getting Started
9 3 11
10 5 4
8 7 6
1
EN
Quick Start Guide
Prestigio MultiPad
PMP7100D3G_DUO
2
12
3. Charging
Insert the connector of adaptor to the DC port of the device and
connect the power adapter to the wall socket for charging.
Normally it takes approximately 4 hours to fully charge the device.
Operating the device while charging with the AC adapter may extend
the time of full charging.
4. Power on/Power off
To turn on the device, press and hold the Power Button until you see
the start-up screen then release. It will automatically enter the Home
screen.If it is first time to use it, it will enter Prestigio Wizard
screen.please follow the on-screen instructions
Press the Power Button once to enter sleep mode and press it again
to awake the device.
Press and hold the Power Button, and then tap on OK to power off
the device.
EN – 2 PMP7100D3G_DUO
Page 3
EN
Quick Start Guide
Prestigio MultiPad
PMP7100D3G_DUO
5．Inserting a Memory Card
The device supports micro SD/SDHC cards.
To insert a Micro SD card, place the card connector towards the front
side of the device and the printing side of the card towards the rear
side of the device.
To remove the micro SD card, gently press the edge of the card to
release the safety lock and pull the card out of the slot.
Notice:
When you are reading the file from micro SD card, please don’t
remove it, or the device could fail to operate correctly.
6. Connecting to Wi-Fi
In the Home menu press the icon and select Settings icon to
access the list of options. Select Wireless & networks.
If the Wi-Fi is off, tap on the Wi-Fi line to turn it on.
The device will scan for available Wi-Fi networks and display them at
the right of the screen.
Tap on the network you want to connect to. Then tap inside the
Wireless password field to make the virtual keyboard appear. Enter
the required network information, tap on Enter, and then tap on
Connect.
Your device will now attempt to establish a connection to the Wi-Fi
access point with the network parameters you entered.
7. Transferring content from PC
Connect the device to your PC/Notebook via USB cable.
Select the content you want to transfer from your PC/Notebook.
Drag the content from the PC/Notebook to the device.
Please do not disconnect the USB cable during loading. It may cause
malfunction of the device and files.
Left click on to disconnect the device and PC/Notebook safely.
PMP7100D3G_DUO EN - 3
Page 4
Technical Specifications
Processor
ARM Cortex A9 Dual core up to 1.6GHz &Mali
400 Quad Core GPU
RAM
1GB DDR3
Display
10.1” MVA LCD, Capacitive multi-touch
Resolution
1280 x 800 pixels
Storage capacity
16GB flash memory (about 14.0GB are
accessible by user), Memory card slot
supports micro SDHC card up to 32 GB
Interfaces
USB 2.0, Micro SD (micro SDHC
compatible), USB Host
Communications
WiFi (802.11 b/g/n)
Battery
6400 mAh Li-Pol battery
Dimensions
257 x 175 x 10.5mm (L x W x H) (appro.)
Weight
680 g (appro.)
Storage Temperature
-20℃ ～ +55℃
Operation
Temperature
5℃ ～ +35℃
Operation Relative
Humidity
35% ～ 85%
Storage Relative
Humidity
20% ～ 93%
Disclaimer
Quick Start Guide
Prestigio MultiPad
PMP7100D3G_DUO
EN
As the Prestigio products are constantly updated and improved, your
device’s software may have a slightly different appearance or modified
functionality than presented in this Quick Start Guide.
EN – 4 PMP7100D3G_DUO
Loading...