Prestigio PMP-3670B Operating Instructions

USER MANUAL | New MultiPad 7.0 ULTRA+ | PMP3670B Tablet PC

New MultiPad 7.0 ULTRA+

PMP3670B

Tablet PC

User Manual

www.prestigio.com

USER MANUAL | New MultiPad 7.0 ULTRA+ | PMP3670B Tablet PC

Common information

Dear Customer, Thank you for choosing Prestigio New MultiPad 7.0 ULTRA+ (PMP3670B) Tablet PC. Before starting to use the tablet, please read this manual carefully to discover all its features. Please save this manual and refer to it in the future if you have questions concerning your device. This manual contains safety information, technical specifications of Prestigio New MultiPad 7.0 ULTRA+ (PMP3670B) Tablet PC, preinstalled software basic features, setup and other useful information, which will help you to improve your use of the device, Android operating system and applications. For information about meaning of the terms used in this manual, please refer to the "Glossary" section at the end of this manual, as well as to other open information sources or Prestigio customer support line.

Disclaimer

As the Prestigio products are constantly updated and improved, your device’s software may have a slightly different

appearance or modified functionality than presented in this User Manual. We make every effort to ensure that the information and procedures in this user manual are accurate and complete. No liability can and will be accepted for any errors or omissions. Prestigio reserves the right to make any changes without further notice to any products herein.

Important Safety Instructions

Your Prestigio New MultiPad 7.0 ULTRA+ (PMP3670B) Tablet PC is manufactured and designed for mobile usage. Please read the following instructions carefully. It helps you to use your device without safety issues and keep your Tablet PC in good working condition:

1. Do not place objects on top of the MultiPad as objects may scratch the screen.

2. MultiPad should be kept away from extreme changes of temperature.

3. Protect it from direct sunlight or heat sources.

4. Protect the device from moisture and from dusty or smoky environment as it can harm the tablet.

5. Keep your MultiPad away from contact with active chemicals.

6. Do not place the MultiPad on an uneven or unstable surface. Fall of the device can cause damage to the LCD screen which is not covered with warranty.

7. Do not expose the MultiPad to strong magnetic or electrical field.

8. Protect your MultiPad from hits and extreme pressure.

9. Operation Temperature: This MultiPad should only be used in environments with ambient temperatures between 0°C (32°F) and 50°C (122°F).

10. Do not insert into MultiPad devices or items not matching to standard sockets on it.

11. Do not use MultiPad in the rain - it is NOT a waterproof device. Protect the Multipad from dust, dirt and high humidity.

12. Do not use Your MultiPad during driving.

13. Use only manufacturer approved chargers. Using non-original chargers may cause damage of the device and be harmful to your health.

14. The MultiPad and the adapter may produce some heat during normal operation or charging. Avoid placing it to the soft surfaces, other places and conditions which may prevent normal dispersion of the heat, causing device overheating. Do not leave the MultiPad on your lap or other part of the body to prevent discomfort or injury from heat exposure.

15. Disconnect the MultiPad from an electrical outlet after it is charged.

16. Do not use a pen or any sharp object to tap the screen. Clean the touch screen with a soft cloth. If needed, dampen the cloth slightly before cleaning. Never use abrasives or cleaning solutions.

17. DO NOT disassemble the MultiPad, only a Prestigio certified service technician should perform repair.

18. Always power off the MultiPad to install or remove external devices that does not support hot-plug.

29. Your MultiPad must be switched off during airplane take-off and landing.

Warranty Information

Warranty information could be found at http://www.prestigio.com/support/service-centers. Prestigio New MultiPad 7.0

ULTRA+ (PMP3670B) Tablet PC life cycle is 2 years.

USER MANUAL | New MultiPad 7.0 ULTRA+ | PMP3670B Tablet PC

Contents

1. Product Overview

1.1 Package Contents

1.2 Device Overview

2. Getting Started

2.1 Charging the battery

2.2 Using the storage card

2.3 Hot plug of storage card

2.4 Memory space

2.5 Power on/off and Device Reset

2.6 Startup Wizard

3. Home Screen

3.1 Status and notifications

3.2 Shortcuts to Add widgets

3.3 Finger gestures

3.4 Coping files to and from the storage card

3.5 Searching the device and the web

4. Personalizing

4.1 Change the Notification ringtone

4.2 Change your wallpaper

4.3 Personalize your Home screen with folders

4.4 Rearrange widgets and shortcuts on your Home screen

5. Web browsing

6. Manage Applications

7. Typical applications

7.1 Music Player

7.2 Video Player

7.3 Gallery

7.4 File Manager

7.5 Instant Messaging tools

7.6 E-mails

7.7 Camera

8.Prestigio preinstalled applications

9. Settings

9.1 Wireless & networks

9.2 Sound

9.3 Display

9.4 Storage

9.5 Apps

9.6 Accounts& Sync

9.7 Location service

9.8 Security settings

9.9 Language & input setting

9.10 Backup &reset

9.11 Date & Time setting

9.12 Accessibility

9.13 Developer options

9.14 About tablet

10. Troubleshooting

10.1 Force shutdown

10.2 Restore default settings

10.3 System updating

11. Glossary Appendix. eReader Prestigio Manual

USER MANUAL | New MultiPad 7.0 ULTRA+ | PMP3670B Tablet PC

Prestigio New MultiPad 7.0 ULTRA+ (PMP3670B)

Tablet PC – 1x OTG Cable – 1x USB Cable – 1x Power Adapter – 1x Quick Start Guide – 1x Legal and Safety Notices – 1x Warranty Card – 1x

Power Button

Turn on/off the device; Suspend/Activate the device

Earphone Jack

Earphones connection

USB port

USB connection

Vol +\ Vol - Button

Adjust the volume level.

Speaker

Emit sound, voice or music

Camera

Take photos.

Reset

Reset the device if it fails to operate correctly

Micro SD Card Slot

Insert Micro SD card.

8 5 7

1 2 3

1. Product Overview

1.1 Package Content:

1.2 Device Overview

Control Buttons and Connectivity:

USER MANUAL | New MultiPad 7.0 ULTRA+ | PMP3670B Tablet PC

Technical Specifications:

Processor

CPU

High performance ARM Cortex A8

CPU Internal Clock Rate

1.0 GHz

Display

Display Size

7.0 inches

Display Resolution

800 x 480 pixels

Display Technology

TFT LCD

Display Features

Capacitive multi touch screen

Screen rotation

G-Sensor

Graphic Card

CPU

Mali 400 MP

GPU Speed

360Mhz

Memory

Internal Memory Size

4 GB

Installed RAM Storage Capacity

512 MB

Flash Card

Supported Micro SD/Micro SDHC Card up to 32GB

Interfaces

Interface ports available

Micro SD, Micro SDHC, Micro USB 2.0

Interface Wi-Fi

IEEE 802.11b/g/n

Interface Bluetooth

Interface USB

1 x micro USB

Interface Audio

1 x 3.5 mm mini jack

Multimedia

Digital Camera

Front : 0.3 Mpix

Supported eBook Formats

EPUB, PDF, TXT, FB2, PDB, RTF

Supported Audio Formats

MP3, WMA, FLAC, AAC, AMR, M4A, OGG, MP2, WAV, APE, MID

Supported Picture Formats

BMP, JPG, GIF, PNG

Supported Video Formats

AVI, 3GP, WMV, MP4, MOV, MPG, RM, RMVB, FLV, MKV, VOB, M2TS, TP, TS

Video Features

FullHD Video Playback

Sound Features

Stereo Audio Playback

Software

Operating System

Android 4.1 (upgradable)

Battery

Battery Technology

Lithium Polymer

Battery Current Capacity

3200 mAh

Battery Video playback Time

Up to 4hr

Battery Audio playback Time

Up to 18hr

Battery Standby Time

Up to 120hr

Miscellaneous

Built-in Devices

Card Reader, Microphone, Speakers

Included Accessories

Power Adapter, USB Cable, Quick Start guide, Warranty Card, OTG-cable

System Requirements

Microsoft Windows 2000, Microsoft Windows 7, Microsoft Windows Vista, Microsoft Windows XP, Apple Mac OS X 10.4 or Later, Linux 2.4.0 or Later

Applications Installed

Google Play, Browser, Explorer, Gmail, E-Mail, Google Maps, Office Suite, Blue, Facebook, Twitter, Youtube, eBook, Music, Video, Gallery, Calculator, Calendar, FreeNote, Stock Alert, Barcode Scanner, Currency Converter, Angry Birds, Chess Free, 250+ Solitairs, Camera, Skype, eReader Prestigio, SugarSync, OTA updates

Warranty

Warranty Term (month)

24 month

Temperature and Humidity

Storage Temperature

-10°C (50°F) ~ +60°C (140°F)

Operation Temperature

0°C (32°F) ~ +50°C (122°F)

Storage Relative Humidity

20% ~ 90%, Non-Condensed

Operating Relative Humidity

20% ~ 90%, Non-Condensed

USER MANUAL | New MultiPad 7.0 ULTRA+ | PMP3670B Tablet PC

Getting Started

2.1 Charging the battery

Prestigio MultiPad comes with a built-in Lithium Polymer rechargeable battery and is designed to use only manufacture-specified original batteries and accessories. You can see battery status on status bar of MultiPad in the lower right corner of the home screen. Android OS has battery charge detection system and notify user if battery charge is low and device need

to be connected to AC adapter. If you will see such message, or your device couldn’t power on, connect

original AC power adapter to charge your device. Plug one end of the adapter into the power jack of the device, and the other to the power socket. To extend the battery operation life, wait for finish of charge process.

Please, fully charge your new device after unpacking. Normally it takes approximately 4 hours to fully charge the device. Operating the device while charging with the AC adapter may extend the time of full charging. [Note]: it is normal if the device is warm or hot during charging, you can use it as usual, just follow the respective security precautions. Please be informed, that Lithium Polymer is considered to be a consumable part of your MultiPad, it’s rated capacity might fall up to 50% during first two years from the date of purchase; such reduction of capacity is not a defect and is not covered with warranty.

2.2 Using the storage card

Your new Prestigio MultiPad 7.0 ULTRA+ (PMP3670B) Tablet PC is equipped with Micro SD card slot to extend available device memory. It is compatible with Micro SD/ Micro SDHC/ TF-Flash card formats of size up to 32Gb. Proper functioning of larger capacity cards is not guaranteed.

Insert the storage card

To insert a Micro SD card, place the card connector towards the front side of the device and the printing side of the card towards the rear side of the device, place the card into the slot and press it until click. Card must be inserted effortlessly. Do not push the card too strong, this could damage the card slot or storage card.

Browse files in the storage card

To browse the files you should do one of the following:

● Select “Explorer” icon to view files in the storage card;

● You can also install and run any other third party file browser applications.

Remove the storage card

To avoid data loss or damage, please stop using files/programs in the storage card, and then tap Settings> Storage>USB Storage> Unmounts SD card to remove it safely.

To remove the storage card, gently press the edge of the card to release the safety lock and pull the card out of the slot.

[Note]:

1. Make sure the location and direction of the storage card is correct when inserting.

2. To avoid possible issues or incompatibility of the storage card with your MultiPad, major brands of

USER MANUAL | New MultiPad 7.0 ULTRA+ | PMP3670B Tablet PC

storage card are recommended. Never use damaged or cracked storage cards as this might damage the MultiPad or cause loss of your data.

3. When you are reading the file from micro SD card, please don’t remove it, or the device could fail to

operate correctly.

2.3 Hot plug of storage card

Please do not hot plug the storage card when using or browsing its files.

For example, when you are running the Music/Video Player/ Gallery, the storage card could be damaged and files on it might become corrupt if you take out the storage card without proper preparation. As for details of inserting/removing storage card, see 2.2 Use the storage card.

2.4 Memory space

The capacity of built-in flash chip is 4GB. The device contains 2 memory partitions: Internal storage & NAND Flash storage. The space is partitioned to store apps, setting and user data. A part of storage will be reserved for system resources and wouldn’t be available for user. The exact size of available memory may vary depending on Firmware version. MultiPad supports extended storage – micro SD cards of 32GB maximum capacity.

2.5 Power on/off and Device Reset

1. Power on: press down the Power Button and hold it for a while to turn on the device when the

battery is full enough.

2. Power off: press down the Power Button and hold it for about 3 seconds and then select Power Off

in popup menu to turn off the device.

3. Screen Lock：short-press down the Power Button once to shut down the screen to save battery life.

Short-press down the Power Button again to activate the lock screen. After unlocking, the device will resume the screen before locking.

4. Reset: Use a paper clip to press the reset button (marked as “reset” on a back side of the MultiPad).

Press the power button for about 8 seconds to perform forced reset of device.

2.6 Startup Wizard

Prestigio Startup Wizard will guide you through the initial setup of your MultiPad. It appears at first start and consists of several steps. Following information will help you to avoid issues during that stage. Welcome! Screen allows you to choose the desired language of the operational system of Prestigio

MultiPad. Tap “Change language” button to access a list of available languages. You can select the language you need in this list, than you’ll return back to the Welcome screen. Tap next, read and accept

End User License agreement to continue.

Please, note that in case you refuse to accept EULA (Dismiss button) you won’t be able to proceed with

device activation.

USER MANUAL | New MultiPad 7.0 ULTRA+ | PMP3670B Tablet PC

Keyboard Input Language screen provides users with option to select the necessary layouts of Android

Keyboard.

USER MANUAL | New MultiPad 7.0 ULTRA+ | PMP3670B Tablet PC

You may select several layouts (e.g. English (US) and German) by checking respective checkboxes.

Tap and to continue when ready.

Date and Time screen has to be used for exact Time Zone setup. By default the MultiPad tries to retrieve time information from Internet time servers. In case you do not have an Internet access right now you may use Advanced Options button, turn Automatic date & time OFF and configure manually.

USER MANUAL | New MultiPad 7.0 ULTRA+ | PMP3670B Tablet PC

Tap Next button to continue to Wi-Fi connections screen.

To connect to a Wi-Fi network, you should tap button Configure Wi-Fi, choose your wireless network name in a list and enter its password in pop-up menu:

USER MANUAL | New MultiPad 7.0 ULTRA+ | PMP3670B Tablet PC

You may check the Show Password option in order to make it visible, but please consider the possible security risks.

After successful connection, the Wi-Fi connected icon will appear on the status bar.

Tap and to continue. Third party applications screen allows the customer to install the pack of programs which enhance Multipads functionality. Depending on the exact version of Firmware, the following options are available: A default Android Third party applications tool. In case of this option (see screenshot below) a user can either decide to install the pre-loaded content by tapping Install button, or skip the third party application stage. In case of Don’t Install choice the wizard will automatically continue to final screen. Otherwise the installation sequence will be initiated. Alternatively, an Installer Prestigio could be launched

instead of default third party installation wizard.

USER MANUAL | New MultiPad 7.0 ULTRA+ | PMP3670B Tablet PC

This utility has the extended functionality comparing the default Third party application utility. It provides user with the better tools for management of pre-loaded applications and games. Installer Prestigio scans the MultiPad for installation files pre-loaded during production, displaying the found application in a list. In addition, it offers the customer to check online Prestigio repository for applications and games for this particular model and region. Tap Check Online Now button to use this option. Application name, as well as its brief description and size to download will be displayed in the list.

USER MANUAL | New MultiPad 7.0 ULTRA+ | PMP3670B Tablet PC

You may check the desired ones and tap Download and Install button. After you accept the Legal disclaimer the installation starts. After it finishes installation successfully Wizard will automatically continue to the Thank you! Screen.

Now you can tap OK button and start using your MultiPad. Hope you will enjoy this experience. Thank you!

USER MANUAL | New MultiPad 7.0 ULTRA+ | PMP3670B Tablet PC

3. Home Screen

The Home screen is your starting point to access all the features on your device. It displays application icons, widgets, shortcuts, and other features. You can customize the Home screen with different wallpaper & widgets and display items you want. See the Personalizing section in this manual. When you start, the Home screen appears.

Sleep mode

Sleep mode suspends your device to a low power state while the display is off in order to save battery power. You will still be able to receive messages while the device is in Sleep mode. [Note]: By default the device enters sleep mode automatically in case it’s not operated for 2 minutes. You may change this time or even disable automatic sleep mode activation in menu Settings-Device-

Display-Sleep.

Wake up from sleep mode

To wake up your device manually, press the Power Button. You will see a Lock Screen than.

Unlocking the screen

Touch the lock icon , hold it and slide towards.

USER MANUAL | New MultiPad 7.0 ULTRA+ | PMP3670B Tablet PC

Please note, that depending on the direction you move the unlock icon, you may just unlock the

MultiPad and enter Home screen, or start any other applications. Otherwise the installation sequence will be initiated.

Other unlock ways, like PIN code, Face Unlock, Pattern etc. could be set up by user in menu Settings-

Personal-Security-Screen Security – Screen Unlock.

Browse Home Screen

You can go to the extended Home screen by sliding your finger horizontally across the screen to go to

the left or right side of the Home screen. Tap the icon to view all applications on your device.

USER MANUAL | New MultiPad 7.0 ULTRA+ | PMP3670B Tablet PC

3.1 Status and notifications

Status icons and its meanings

Tap to go to the Home screen

Back

Recently applications view

Menu icon Android debug bridge enabled

Connected to a Wi-Fi network and display the signal strength

Battery status

Notification icons its meanings

New Gmail (Google Mail) message

New Email message

Music player is ongoing

SD card is mounted

USB Connected

Airplane mode

Settings

Status and Notification Icons may appear.

The status bar contains different information like time and date, battery status, wireless networks status, active notifications from Android OS or installed applications and so on. When an application is running, corresponding notification icon will appear in the notification area. Icons you may often see are listed as follows:

USER MANUAL | New MultiPad 7.0 ULTRA+ | PMP3670B Tablet PC

Open notification panel

If a new notification icon displays in the status bar, touch and hold the status bar, then slide your finger upwards to open the Notifications panel as follows:

If you have several notifications, you can scroll down the screen to view more notifications. In the notification panel there are shortcuts for quick access to Settings and Wi-Fi tabs.

Close the Notifications panel

Simply touch the button on the device panel.

USER MANUAL | New MultiPad 7.0 ULTRA+ | PMP3670B Tablet PC

3.2 Shortcuts to Add widgets

Widgets put at-a-glance important information and media content up front on your Home screen. Some widgets are already added to your Home screen for your convenience. You can add more from the available selection of widgets, or download more widgets.

Adding a widget to your Home screen

To add widgets to Home screen, you can:

- Tap on the home screen to enter into all apps interface as follows

+ 40 hidden pages