Prestigio GeoVision 5050 iGo User Manual

EN
EN - 1
1
Stylus Pen 1
Car Charger 1
ITEM NAME QTY
Accessories
Accessories List
Instructions
Important Safety
USB Cable 1
Mounting Cradle 1
User Manual 1
Driver/Documentation CD 1
Warranty Card
.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
user-serviceable parts inside. Refer servicing to qualified service personnel.
substitutions and modifications of the product without authorization from the
manufacturer or authorized unit
CAUTION
1. To reduce the risk of electric shock, do not remove the cover (or back). No
2. The manufacturer should not hold responsibility for the damage caused by any
WARNING
liquids should be placed on the device. To prevent the GPS from being damaged, be sure to keep the GPS out of direct
sunlight or heat. Maintain well-ventilated conditions around the unit to avoid
overheating.
connector towards device and card
label towards the front side of the
device.
press the edge of the card to release
the safety lock and pull the card out
z To insert a microSD card, place
Device Connection
Inserting microSD Card
7
5
3
of the slot.
z To remove a microSD card, gently
NOTE:
Please always make sure that no application is accessing the microSD
card before extraction.
Charging
1. Connecting to External USB Device
z Flip open the protective rubber cover towards the front of the device.
z Insert USB connector into the appropriate USB port.
z Insert the other USB connector into USB port on PC to start charging.
4
View of Main Unit
Front and Side View
EN
9
1
2
6
8
color when charging.
Insert the SD card into the slot. Used for Mapping Data or user’s music, photo or
video.
Connect an earphone for private listening. When an earphone jack is plugged in,
1. LCD Touch Screen
Tap the screen with a finger to select commands or use the included stylus.
2. Battery Status Indicator
The indicator glows in bright amber color when battery is fully charged and in red
3. microSD Slot
the speaker will be turned off automatically.
4. Mini-USB Port
Connects to USB Cable for data access or battery charging
5. Headphone Port
6. Reset Button
Used to reset the device.
Used for writing on the LCD Touch Screen.
7. Power Button
Press to power ON/OFF device.
8. Speaker
Emits sound, voice or music.
EN - 2
9. Stylus Pen
g
g
EN
EN - 3
in
Char
Cautions on Battery
The device is equipped with a built-in rechargeable battery. Please fully charge the
About Rechargeable Battery
battery (for at least 8 hours) before initial use. The battery status indicator glows in red
color when charging and turns bright amber color when charging is complete. Charging
time is approximately 2 hours.
Working conditions and precautions for the rechargeable battery
z Device with new batteriey should be fully charged before initial use.
z It is not necessary to start charging the device before the battery is fully discharged.
Device Connection
NOTE:
Excessively loud volume is potentially detrimental to hearing. Please turn
down the volume before connecting the earphone and gradually turn up
charging.
Please connect the car charger to vehicle 12V accessory/cigarette socket after
2. Connecting to Car Charger
z Flip open the protective rubber cover towards the left side of the device.
z Insert USB connector into the appropriate USB port.
z Insert car charger connector into vehicle 12V accessory/cigarette socket to start
vehicle engine is started to protect the device from sudden surges in current.
Connecting to Earphones
z Flip open the protective rubber cover towards the front of the device.
z Insert earphone plug (not included) into the appropriate earphone port to switch
NOTE:
the volume to a comfortable level.
audio output from device speaker to earphone.
Loading...
+ 7 hidden pages