Thank you for choosing Prestigio MultiPad Tablet PC. Before starting to use the tablet, please
Disclaimer
Important Safety Instructions
1. Do not place objects on top of the MultiPad as objects may scratch the screen.
2. MultiPad should be kept away from extreme changes of temperature.
3. Protect it from direct sunlight or heat sources.
4. Protect the device from moisture and from dusty or smoky environment as it can harm the
5. Keep your MultiPad away from contact with active chemicals.
6. Do not place the MultiPad on an uneven or unstable surface. Fall of the device can cause
7. Do not expose the MultiPad to strong magnetic or electrical field.
8. Protect your MultiPad from hits and extreme pressure.
9. Operation Temperature: This MultiPad should only be used in environments with ambient
10. Do not insert into MultiPad devices or items not matching to standard sockets on it.
11. Do not use MultiPad in the rain - it is NOT a waterproof device. Protect the Multipad from dust,
12. Do not use Your MultiPad during driving.
13. Use only manufacturer approved chargers. Using non-original chargers may cause damage of
14. The MultiPad and the adapter may produce some heat during normal operation or charging.
15. Disconnect the MultiPad from an electrical outlet after it is charged.
16. Do not use a pen or any sharp object to tap the screen. Clean the touch screen with a soft
17. DO NOT disassemble the MultiPad, only a Prestigio certified service technician should perform
18. Always power off the MultiPad to install or remove external devices that does not support hot-
19. Your MultiPad must be switched off during airplane take-off and landing.
read this manual carefully to discover all its features. Please save this manual and refer to it in
the future if you have questions concerning your device. This manual contains safety information,
technical specifications of Prestigio MultiPad Tablet PC, preinstalled software basic features, setup
and other useful information, which will help you to improve your use of the device, Android
operating system and applications.
As Prestigio products are constantly updated and improved, your device’s software may have a
slightly different appearance or modified functionality than presented in this User Manual. We
make every effort to ensure that the information and procedures in this user manual are accurate
and complete. No liability can and will be accepted for any errors or omissions. Prestigio reserves
the right to make any changes without further notice to any products herein.
Your Prestigio MultiPad Tablet PC is manufactured and designed for mobile usage. Please read the
following instructions carefully. It helps you to use your device without safety issues and keep your
Tablet PC in good working condition:
tablet.
damage to the LCD screen which is not covered with warranty.
temperatures between 0°C (32°F) and 45°C (113°F).
dirt and high humidity.
the device and be harmful to your health.
Avoid placing it to the soft surfaces, other places and conditions which may prevent normal
dispersion of the heat, causing device overheating. Do not leave the MultiPad on your lap or other
part of the body to prevent discomfort or injury from heat exposure.
cloth. If needed, dampen the cloth slightly before cleaning. Never use abrasives or cleaning
solutions.
repair.
plug.
Page 3
Warranty Information
Warranty information could be found at www.prestigio.com/service. MultiPad Tablet PC life
cycle is 2 years.
The menu, home and back keys help you navigate your t ablet.
• Tapto open the list of recent apps.
• Tapto return to the Home screen.
• Tapto return to the previous screen.
1
2
Microphone
3
4
5Speaker
Earphone jack
6
7Micro USB port
8Rear camera
MulPad PMT3408_4G
Page 7
2
2
2.
Getting started
Congratulations on your purchase and welcome to Prestigio.
To get the most from your product and enjoy all that Prestigio has to offer,
www.prestigio.com/catalogue/MultiPads
More details about your product, please visit:
www.prestigio.com/support
Do not cover the antenna area with your hands or other objects. This may cause
connectivity problems or drain the battery.
Install the SIM card
1. Turn off your device, and then open the SIM card cover on the side.
2. With the standard SIM card’s gold contacts facing down and its angled corner facing inwards,
clicks into place.
3. Close the SIM card cover.
• The use of
incompatible SIM
cards, manually cut SIM cards, or SIM card adapters may damage the cards or the
device, and it may corrupt the data stored on the cards.
• Scratching or bending of the SIM cards may result in the loss of contacts and
information, so be careful when handling, inserting, or removing the cards.
• Keep all SIM cards out of the reach of children.
Insert a memory card
1. Insert a memory card with the gold contacts facing downwards.
2. Push the memory card into the slot until it locks in place.
3.
• Some memory
cards may not be fully compatible with
the device. Using an incompatible card may damage the device or the memory
card, or corrupt the data stored in it.
please visit:
Please read the "Legal and safety notices" in your package before use.
insert the standard SIM card all the way into the SIM card slot. Push the SIM card in until it
Frequent writing and erasing of data shortens the lifespan of memory cards.
UserManual MultiPad PMT3408_4G
Page 8
3
Charge the battery
A new battery is partially charged. The battery icon at the upper-right corner shows the level of
charging status.
1. Plug the small end of the USB cable into the micro USB port of the device, and plug the large
end of the cable into travel charger.
2. After being fully charged, disconnect the device from the charger. First unplug the charger from
the device, and then unplug it from the electric socket.
Always use authentic accessories to optimise your battery performance. Non-authentic
accessories (eg. chargers) can damage your battery and even your tablet.
- Always ensure that your tablet profile is appropriately set to meet your actual usage.
- If you are not using Bluetooth, Wi-Fi or other applications, turn them off.
- Adjust the intensity of your display screen’s backlight to low or medium level and for the
- Avoid using or placing your tablet near magnetic objects (eg. a radio or television) or on metal
1. After turning on the device for the first time, Prestigio Installer Wizard will appear on the
screen. It offers you a few third-party apps, tap the apps you want to install on your tablet.
Follow the on-screen instructions to install the apps.
2. It may take a few minutes for your tablet to install the apps.
To turn off your tablet, press and hold the power button, and then tap
Power off on the
pop-up screen.
If you do not install apps provided by Prestigio Installer Wizard the first time, you can tap
on the Home screen to install these apps the next time.
Optimise your battery performance
Here are some tips to help you optimise your battery performance.
shortest duration.
surfaces, which will impact the network connection and ultimately drain power from your
battery.
Power on your tablet
Press and hold the power button for a few seconds to power on your tablet.
Home screen
Your Home screen is the starting point to access all of your tablet’s features. The Home screen can
have multiple panels. To view other panels, swipe left or right.
Tapto return to the Home screen. Your tablet’s Home screen consists of the following:
UserManual MultiPad PMT3408_4G
Page 9
4
Google search
Status bar
Applications
and widgets
On-screen keys
List menu
Personalise your wallpaper
Pick your favourite photo as your Home wallpaper. Choose from the available wallpapers, or use
1. Tap and hold the blank area on the Home screen.
2. Select one of the following: ES File Explorer, Gallery, Live wallpapers, or Wallpapers.
3. Select an image and tap Set wallpaper. Or, select an image, resize it by dragging the frame, and
Add an app icon to Home screen
1. On the Home screen, tapto open the list menu.
2. Tap and hold an application icon.
3. Drag it into a panel preview.
Remove an item on Home screen
1. Tap and hold an item to remove.
2. The Remove option appears at the top of the Home screen.
3. Drag the item to the Remove option.
4. When the Remove option turns red, release the item.
List menu
orto return to the Home screen. Your tablet’s list menu consists of the following:
any photo you have taken with the camera.
then tap OK.
All your apps and widgets can be found on the list menu. On the Home screen, tapto open the
list menu. The list menu can have multiple panels. To view other panels, swipe left or right. Tap
UserManual MultiPad PMT3408_4G
Page 10
5
Applications tab
Widgets tab
Tap to enter
app shop
Applications
UserManual MultiPad PMT3408_4G
Page 11
6
3.Basics
Finger tips
Only use your fingers to use the touch screen.
Tap
To open an application, to select a menu item,
to press an on-screen button, or to enter a
character using the on-screen keyboard, tap it
with a finger.
3
Tap and hold
Tap and hold an item for more than 2 seconds
to access available options.
Swipe
Quickly swipe your finger vertically or
horizontally across the screen to go to other
home pages, scroll through documents, and
more.
Zoom in
Spread two fingers apart on a web page, map,
or image to zoom in a part.
Slide or scroll
Slide your finger vertically across the screen
to open drop-down menu. Drag up or down to
scroll.
Zoom out
Pinch two fingers together on a web page,
map, or image to zoom out a part.
UserManual MultiPad PMT3408_4G
Page 12
7
Flick
Flick left or right on the Home screen or the
Notifications panel
-
To open the notifications panel, slide down from the top left of the screen.
-
To close the notifications panel, drag up the panel.
- To dismiss the notification, tap.
Quick settings
-
Slide down from the top right corner on the screen to open quick settings.
applications screen to see another panel. Flick
up or down to scroll through a web page or a
list, such as contacts.
When you get a new notification, you can open the notifications panel to see what event
notification or new information you have received.
Quick settings allows you to easily turn on airplane mode, Wi-Fi, and it also provides a quick
shortcut to change the mode, set the brightness, and auto rotation.
UserManual MultiPad PMT3408_4G
Page 13
8
Status icons
Connect to your PC
Your tablet’s micro USB port allows you to exchange media and other files with a PC.
Load files from your PC
1. Connect your tablet to the PC with the included USB cable.
2. Open the notifications panel, and then tap Connected as a media device > Media device (MTP).
3. Transfer files between your tablet and the PC.
Lock and unlock the screen
When not in use, lock your tablet to prevent unwanted operations and save the battery power.
• Lock: press the power button.
• Unlock: press the power button, and then slide the lock icon to unlock your screen.
Your tablet can still:
• Receive calls, text messages, and other updates.
• Play music.
• Adjust the volume.
You can use the earphones to answer a call or listen to music.
Auto lock
You can set a time span for the screen to be locked automatically.
1. On the list menu, tap Settings >Display > Sleep.
2. Select your desired time span.
The icons in the status bar at the top of the screen give information about your tablet:
IconsWhat it meansIconsWhat it means
Silent mode activated.3G network connected.
Vibration mode activated.Wi-Fi connected.
Airplane mode activated.
Battery power level.Bluetooth is activated.
Call in progress.Connected to PC.
Missed call.
New SMS or MMS.Wired eartablet connected
GPRS network connected.No SIM card detected.
EDGE network connected.Alarm is set.
HSPA network connected.
Roaming (outside of normal service
area).
Wired eartablet + microphone
connected.
When your tablet is locked, nothing happens if you touch the screen.
UserManual MultiPad PMT3408_4G
Page 14
9
Set screen lock pattern
Protect your personal information and prevent others from using your tablet without your
• On the list menu, tap Settings >Security > Screen lock.
Unlock your tablet
Turn on the screen by pressing the power button, and enter the unlock code.
If you have forgotten your screen lock pattern or code, you have up to five attempts to
try and unlock your tablet. If this fails, take the device to your dealer to reset it.
Change the input method
1. On the list menu, tap Settings >Language & input > Default.
2. Choose the desired input method.
Enter text
• Type uppercase: tap the Shift keybefore tapping a letter. Or touch and hold the Shift key,
then tap a letter.
• Type lowercase: tap the Shift key again and then tap a letter.
• Enter numbers, symbols or punctuation: tap.
Cut or Copy text
1. Select the text you want, and tapor. The selected text is then cutted or copied to the
2. In a text entry field, press and hold at the point where you want to paste the text.
3. Tap Paste.
Your tablet can check and notify you if there is a new upgrade available. You can also manually
check if there is an available update. You can set this option in Settings > About tablet > System
updates.
permission by setting a screen lock pattern, PIN, or password. You will be asked to unlock the
screen every time your tablet is powered on or when it is idle for a certain period of time.
Enter text
You can download an input app or use the input method pre-installed on your tablet. To change
the input method, follow these steps:
Use the Prestigio keyboard
clipboard.
System upgrade
Do not press any buttons while the device is upgrading.
UserManual MultiPad PMT3408_4G
Page 15
4.Web & network
Youcan connect yourtablet tothe Internet andbrowse aweb page.
4
Connect to the Internet
Your tablet connects to the Internet whenever necessary, using a Wi-Fi
Data connection
Turn on or off data connection
1. On the Home screen or list menu, tap.
2. Tap More... > Mobile networks > Data enabled.
3. Tap to turn on or off data connection.
If you do not have the data connection turned on and you are also not connected to a Wi-
Fi network, you will not receive automatic updates to your e-mail, social network accounts,
and other synced information.
Turn on or off data roaming
Using data services while roaming may be costly. Check with your mobile operator for
data roaming rates before you use data roaming.
1. On the Home screen or list menu, tap.
2. Tap More... > Mobile networks > Data roaming.
3. Tap to turn on or off data connection.
Keep track of your data usage
To help you save on data usage, connect to a Wi-Fi network whenever possible and set
your online accounts and e-mails to sync less frequently.
1. On the Home screen or list menu, tap.
2. Tap Data usage.
3. Turn on data connection, select Set mobile data limit to automatically disable your data
4. Tap Data usage cycle, you can set a particular time interval to see how much data you have
5. Drag the red line marker to set your monthly data limit.
connection (if available) or your mobile operator's data connection.
You can use your mobile operator's data connection. Some apps and services may transfer data
over your mobile operator's cellular network, which may result in additional fees. Contact your
mobile operator for details.
Connect to your mobile operator’s partner networks and access data services when you are out of
your mobile operator’s coverage area.
If you are on a limited data allowance, it is important to keep track of the activities and apps that
send and receive data, such as browsing the web, syncing online accounts, and receiving e-mails or
sharing status updates.
Data usage measured by your tablet may vary with your actual data usage.
connection when you reach the set limit.
used.
UserManual MultiPad PMT3408_4G
10
Page 16
11
Wi-Fi
Connect the device to a Wi-Fi network to use the Internet or share media files with other devices.
The availability and strength of the Wi-Fi signal will vary depending on the environment,
such as building structure or simply a wall between rooms. Wi-Fi signal has to pass
through.
Connect to a wireless network
1. On the Home screen or list menu, tap, and then tap Wi-Fi to turn it on.
2. The Wi-Fi section will show the list of networks detected.
3. Tap the desired Wi-Fi network you want to connect to.
- If you selected a secured network, you will be asked to enter the network key or password.
Turn on or off Wi-Fi
Follow these steps:
-
On quick settings, and then tap WI-FI.
-
On the Home screen or list menu, tap, and then tap Wi-Fi to turn it on or off.
Erase a saved wireless network
1. On the Home screen or list menu, tap, and then tap Wi-Fi.
2. Tap the wireless network you have previously been connected to.
3. Tap Forget.
Use your tablet as a wireless router
Share your data connection with other devices by turning your tablet into a wireless router.
• Make sure the data connection is turned on.
• You must have an approved data plan associated with your account from your mobile
1. On the Home screen or list menu, tap.
2. Tap More....> Tethering & portable hotspot.
3. In Set up Wi-Fi hotspot, enter a router name or use the default router name.
4. Choose the type of security and set the password (key) for your wireless router.
5. Tap to turn on portable Wi-Fi hotspot.
Share your mobile data connection by USB tethering
You can use the data connection of your tablet for your computer to connect to the Internet.
• Make sure your SIM card is inserted on your tablet.
• You may need to have USB tethering added to your data plan, and it may incur
1. Connect your tablet to the computer with the included USB cable.
2. On the Home screen or list menu, tap.
To use Wi-Fi, you need access to a wireless point or hotspot.
The next time your tablet connects to a previously accessed wireless network, you will
not be asked to enter the key or other security information again.
Any network that has ever been used, including the current network, can be erased. Your tablet
will not automatically connect to it.
service provider to use this service.
- If you selected None in Security, you do not need to enter a password. The password is the
key other people need to enter on their device so they can connect and use your tablet as a
wireless router.
additional cost. Contact your mobile service provider for details.
UserManual MultiPad PMT3408_4G
Page 17
12
3. Make sure that data connection is turned on.
4. Tap More....> Tethering & portable hotspot.
5. Tap to turn on USB tethering.
Web browse
You can use your tablet to browse websites. Before browsing a website, please confirm that you
Browse a web page
1. On the Home screen or list menu, tap.
2. Enter your search keywords or a web page address.
3. While browsing a web page, you can:
- Tapto go to the previous web page.
- Tapto go to the next web page.
- Tapto reload the current web page; While the device is loading a web page, this icon
-
Tapto bookmark the current web page.
-
Tapto search for information.
-
Tapto close the current tab.
-
Tapto open a new tab.
- Tapto browse web pages from Bookmarks, History and Saved pages.
Add bookmarks
1. On the Home screen or list menu, tap.
2. Enter your search keywords or a web page address.
3. Browse a web page.
4. Tap.
Download files
You can download files and apps directly from your favourite websites.
Files and apps downloaded from the web can be from unknown sources. To protect your
tablet and personal data, we strongly recommend that you download and open only the
files you trust.
Before you can install the downloaded app, you need to set your tablet to allow
installation of third-party apps in System settings > Security > Unknown sources.
1. On the Home screen or list menu, tap.
2. Go to the website where you can download the file you want.
3. Follow the website's download instructions for apps.
View your downloads
1. On the Home screen, tap.
2. Tap the file to open it.
Browser settings
• From the browser screen, tap > Settings.
have turn on data connection or Wi-Fi.
changes to.
Customise the web browser to suit your browsing needs. Set display, privacy, and security options
when using the web browser.
UserManual MultiPad PMT3408_4G
Page 18
13
5
5.Mail
Use this application to send or view e-mail messages. Learn to send or view e-
mail messages via your personal or company e-mail account.
Set up an e-mail account
1. On the Home screen or list menu, tapand do one of the following:
- If this is your first time adding an e-mail account in Mail, move to the next step.
- If you have already added an e-mail account, then tap> Settings > ADD ACCOUNT.
2. Enter the e-mail address and password for your e-mail account.
3. Tap Next for a private e-mail account, or tap Manual setup for a company e-mail account.
4. Follow the prompts to complete the setup.
When you finish setting up the e-mail account, the e-mail messages will download to your
device.
Send a mail
1. On the Home screen or list menu, tap.
2. Switch to the e-mail account that you want to use.
3. Tap.
4. Fill in one or more recipients.
- If you want to loop in more recipients in a carbon copy (Cc) or blind carbon copy (Bcc) of the
5. Enter the subject, and then compose your mail.
-
Add an attachment: tap> Attach file and then choose the files you want to send out.
6. Tapto send the mail.
1. On the e-mail inbox, tapto check whether there is a new mail.
2. Tap the desired mail to read it.
Search for a mail
1. Tapto display the search bar.
2. Choose a search option in the drop-down list.
3. Enter the first few letters of the mail sender or subject in the search bar.
4. Select the mail from the list.
Reply to a mail
1. On the e-mail inbox, tap the e-mail message.
2. Tap, and then compose your mail.
3. Tapto send the mail.
Delete mails
• Tap the mail you wish to delete, and then tap.
Consult your mail service provider for the mail server configuration.
e-mail message, tap> Add Cc/Bcc.
View your mails
- Useorto view the previous or next mail.
UserManual MultiPad PMT3408_4G
Page 19
14
Gmail
Use this application to quickly and directly access the Google Mail service.
View your Gmail Inbox
All your received e-mail messages are delivered to your Inbox.
1. On the Home screen or list menu, tap.
2. Your mail inbox is displayed on the screen.
3. Tap> Refresh to check whether there is a new mail.
4. Tap the desired mail to read it.
5. Swipe left or right to view the previous or next mail.
Add this e-mail
address to
contacts list.
Mark the e-mail as a
reminder.
Reply to this e-mail.
Reply to all recipients
or forward this e-mail
to others.
Keep this e-mail for
long-term storage.
Delete this e-mail.
Mark the e-mail as unread.
Add a label to this e-mail.
UserManual MultiPad PMT3408_4G
Page 20
15
6
6.Camera
With your tablet, you can take both photos and videos as desired. In addition to
a rear camera, there is a camera on the front for video calls and self-portraits.
An LED flash on the back gives you extra light when you need it.
- To use the camera, on the Home screen or list menu, tap.
Your camera at a galance
Tap to select
capture mode.
Select capture mode
Capture a
photo.
Tap to switch cameras
and change settings.
While using your camera, you can scroll down to select your desired capture mode. You can
choose the following capture modes:
Take a single photo.
Record a video.
Take a panoramic photo. You can take a photo composed of many photos strung together.
UserManual MultiPad PMT3408_4G
Page 21
16
Take a photo
1. Turn on the camera.
2. Spread or pinch the screen to zoom in or out.
3. Change the camera setting if necessary.
4. Just point the camera at what you want to capture. The camera adjusts the focus automatically
5. Tapto capture the photo.
Take a photo of yourself
1. Turn on the camera.
2. On the screen, tap>.
3. Tapto capture the photo.
Take a panoramic photo
You can capture anything wide or tall in a single photo by using your tablet.
1. Turn on the camera.
2. Tap, and then tap.
3. When you’re ready to take the first shot, tap. Directional arrows appear, prompting you to
pan left or right in landscape view (or pan up or down in portrait view).
4. Pan your tablet as smoothly as you can, and then pause when you see a complete frame on the
Viewfinder screen. The camera automatically captures the shot.
5. Repeat the previous step to take the remaining shots.
6. The camera stitches the shots into a single photo.
Using HDR
1. Turn on the camera.
2. Tap>.
3. When you are ready to take the photo, tap.
Record a video
1. Turn on the camera.
2. Tap, and then tap.
3. While recording, use the following actions:
-
Freely zoom in or out.
-
To capture an image from the video while recording, just tap the screen.
4. To stop recording, tap.
Camera and video settings
Before you take a photo or record a video, customise your camera settings.
1. Turn on the camera.
2. Choose/, and then tap>to customize your camera.
as you move it.
Zoom and flash are disabled when you are in this mode.
When shooting portraits against a bright background, use the HDR (High Dynamic Range) scene to
capture your subjects clearly. HDR brings out the details of both the highlights and shadows, even
in high contrast lighting.
Do not move your tablet during HDR capturing.
UserManual MultiPad PMT3408_4G
Page 22
17
- Store location: Attach a GPS location tag to the photo.
- Picture size: Select from various standard sizes for your picture.
- Select ISO: An ISO value indicates the light sensitivity of your camera’s imaging sensor. A high
ISO setting increases light sensitivity, but it can also add noise to the picture. Low values are
- Exposure: This determines how much light the camera’s sensor receives. For lowlight
- White balance: Select an appropriate white balance, so images have a true-to-life colour
- Color Effect: Select among various photo effects to suit your needs.
- Scene mode: Select your desired scene mode.
- Face detection: Set the ideal exposure and clarity of faces.
- Restore defaults: Restore to default settings.
To improve GPS signals, avoid shooting in locations where the signal may be obstructed,
such as between buildings or in low-lying areas, or in poor weather conditions. Your
location may appear on your photos when you upload them to the Internet. To avoid this,
deactivate the GPS location info.
for stationary or brightly-lit objects. Higher values are for fast-moving or poorly-lit objects.
situations, use a higher exposure.
range. The settings are designed for specific lighting situations. These settings are similar to
the heat range for white-balance exposure in professional cameras.
User Manual MultiPad PMT3408_4G
Page 23
User Manual MultiPad PMT3408_4G
18
7
7.Multimedia
Your tablet provides several multimedia for your entertainment. You can view
your photo gallery, enjoy music, and watch videos.
Gallery
Use Gallery to view all your photos and videos on your tablet.
• To open your Gallery, on the Home screen or list menu, tap.
Some file formats may not be supported depending on the software installed on your
device.
View your photos
1. On the Home screen or list menu, tap.
2. Tapto open a drop-down list, and then tap Albums/Locations/Time.
3. Browse an album or a group of photos.
4. Tap a photo to view it full-screen.
Zoom in and out
Use one of the following methods to zoom in or zoom out an image:
• Double-tap anywhere to zoom in.
• Spread two fingers apart on any place to zoom in. Pinch to zoom out, or double-tap to return.
Start a photo slideshow
1. On the Home screen or list menu, tap.
2. Browse to select an album or a group of photos.
3. Tap > Slideshow.
Edit your photos
When viewing a photo, tap to use the following functions:
• Delete: Delete the photo.
• Slideshow: Start a slideshow with images in the current folder.
• Edit: Launch Paper Artist to edit a photo.
• Rotate left: Rotate anticlockwise.
• Rotate right: Rotate clockwise.
• Crop: Resize the orange frame to crop and save your photo.
• Set picture as: Set a photo as your wallpaper or a contact image.
• Details: Check information of the photo file.
Share your photos
You can share your photos with another device via e-mail, MMS or Bluetooth.
1. On the Home screen or list menu, tap.
2. Select the photo(s) that you want to share.
3. Tapto open a drop-down list, and then tap E-mail/Messaging/Bluetooth.
Delete photos
1. On the Home screen or list menu, tap.
2. Select the photo(s) that you want to delete.
3. Tap , and then tap delete.
Page 24
19
Video player
You can use the video player on your tablet to watch videos.
Watch a video with the video player
1. On the Home screen or list menu, tap video player.
2. Select the video that you want to watch.
3. Tap the on-screen keys to control the video playback.
4. Press the volume button to adjust the sound.
5. Tap to select more options.
Share your videos
1. On the Home screen or list menu, tap video player.
2. Select the video(s) that you want to share.
3. Tapto open a drop-down list, and then tap E-mail/Messaging/Bluetooth.
Music player
You can listen to your favourite music with the music player. The music app is a central hub for
• To use the music player, on the Home screen or list menu, tap.
Browse music
1. From the Home screen, tap.
2. You can:
- Tap Artists/Albums/Playlists to browse songs sorted by artists, albums, or playlists.
- Tap Songs to browse all songs.
- Tap Now playing to check the song that is playing now.
Listen to music
1. On the Home screen or list menu, tap.
2. Tap a song from the list.
3. Use the following keys to control playback:
Set a song as ringtone
1. On the Home screen or list menu, tap.
2. Tap a song from the list.
3. Tap and select Use as ringtone.
your favourite music whether it is stored in your tablet or streamed through a music service.
Back to current playlist.
Turn on shuffle.
Select play mode: Repeat one, Repeat all or Off.
Skip to the previous song. Tap and hold to move backwards quickly.
Skip to the next song. Tap and hold to move forwards quickly.
Pause and resume playback.
UserManual MultiPad PMT3408_4G
Page 25
Delete a song
1. Tap a song from the list.
2. Tap and select Delete.
Your playlist
Create a playlist
You can make your own playlist.
1. Tap a song from the list.
2. Tap and select Add to playlist.
3. On the pop-up screen, tap New to create a new playlist.
4. Enter a title and tap Save.
Rename or delete the playlist
1. Tap Playlists to view all your playlists.
2. Tap and hold the playlist you want to rename or delete.
3. Select Rename/Delete on the pop-up screen.
FM radio
You can listen to radio programs with your tablet.
You must connect a headset before using the FM radio on your tablet.
Listen to a radio station
1. On the Home screen or list menu, tap FM radio.
2. Tap > Scan. It will start scanning automatically and save the available channels.
3. Use the following keys to control playback:
Record radio programs
You can record a radio program when listening to it.
1. Tune to your desired radio station.
2. Tap > Start recording.
3. Tap > Stop recording.
4. the sound clip will be automatically saved.
Turn on or off FM radio.
Switch between stereo and mono.
More options.
Skip to previous channel.
Skip to next channel.
UserManual MultiPad PMT3408_4G
20
Page 26
21
8
8.Messages
Messages let you exchange text messages with other SMS and MMS devices via
your cellular connection. Your sent and received messages are neatly grouped
into conversations, by contact name or phone number.
Send a message
1. On the Home screen or list menu, tap.
2. Tapto start composing a new message.
3. Use the following methods to add recipients:
- Enter a phone number.
- Tap, select contacts, and then tap OK.
4. Enter the text message in the text box.
5. Tapto add picture/video/audio/slideshow if you want to send an MMS message.
6. Tapto send the message.
There is a limit on the number of characters for a single text message (displayed above
the send button). If you exceed the limit, your text message will be delivered as one but
will be billed as more than one message.
Check your message
Depending on your notification settings, your tablet plays a sound, vibrates, or displays the
• Open the notifications panel, and then tap the new message notification.
• Go to the messages app and open the message.
Reply to a message
1. On the messages screen, tap a contact (or phone number) to display the exchange of messages
2. In the text box, enter your message.
3. Tapto send the message.
Forward or delete a message
1. On the messages screen, tap a contact (or phone number) to view the exchange of messages
2. Tap and hold a message.
3. In the pop-up window (Message options), select Forward or Delete.
Delete a conversation
1. On the Home screen or list menu, tap.
2. The messages screen is displayed.
3. Tap and hold a contact or phone number.
4. Tap.
message briefly in the status bar when you receive a new message. A new message icon is also
displayed in the status bar. Incoming messages are grouped into message threads by contact.
with that contact.
with that contact.
UserManual MultiPad PMT3408_4G
Page 27
22
9
9.Bluetooth
Bluetooth
Your tablet can connect to a compatible Bluetooth device for exchanging data.
Do not use the Bluetooth feature for illegal purposes (for example, pirating copies of files
or illegally tapping communications for commercial purposes).
Pair with a Bluetooth device
1. Tap.
2. Tap to turn on or off Bluetooth.
3. A list of available Bluetooth devices will appear.
4. Select the device you wish to connect with.
5. Tap Pair. The pairing is made if your pairing request is accepted by the other device.
1. Select the device you want to unpair and then tap.
2. Tap Unpair.
Send data via Bluetooth
1. Tap.
2. Tap to turn on or off Bluetooth.
3. Pair with a Bluetooth device.
4. Select the file you want to share.
5. Tapto send the file via Bluetooth.
6. Select a device to start sending the file.
Receive data via Bluetooth
1. Tap.
2. Tap to turn on or off Bluetooth.
3. Tap your tablet model to make it visible to all nearby Bluetooth devices.
4. Accept the request and pair with the other Bluetooth device.
5. Open notifications panel, tap Accept.
Bluetooth creates a direct wireless connection between two devices over short
distances.
Unpair with a Bluetooth device
The files received via Bluetooth are stored in the Bluetooth folder.
UserManual MultiPad PMT3408_4G
Page 28
23
10. eReader Prestigio
With the eReader Prestigio, you can easily and quickly download and read
e-books on your tablet.
• On the Home screen or list menu, tap.
Your eReader at a glance
View your
bookshelf.
10
Find e-books in
your library.
Go to Bookstore.
Change different
search item.
e-books.
Search e-books
by keyword.
Edit your
collections.
Edit your bookshelf.
Download an e-book
You can download e-books via eReader Prestigio. Some e-books are free to download, and some e-
1. On the Home screen or list menu, tap.
2. Tap Bookstore.
3. Search for your desired e-book.
4. Tapto download the e-book.
books need a payment.
You will be asked to confirm the method of payment when you purchase a paid e-book.
UserManual MultiPad PMT3408_4G
Page 29
24
Read an e-book
1. On the Home screen or list menu, tap.
2. Tap My shelf or My library.
3. Find your desired e-book.
4. Tap the e-book to read it.
Add a bookmark
1. While reading an e-book, tap .
2. Tap, and then tap New bookmark.
3. The selected page is added to bookmark.
Zoom in and out
While reading an e-book, you can zoom in or out the screen to fit your reading.
1. While reading an e-book, tap .
2. Tap.
3. Tap Zoom in or Zoom out.
eReader settings
You can set up your eReader Prestigio while reading an e-book.
1. While reading an e-book, tap .
2. Tap Settings.
3. Select your desired options.
UserManual MultiPad PMT3408_4G
Page 30
25
11
11. Google maps
Use this application to pinpoint the location of your tablet, search for places, or
get directions.
Use Google Maps
Google Maps lets you track your current location and receive detailed directions to your
• On the Home screen or list menu, tap.
Turn on or off location service
In order to find your location on your tablet, you need to enable location service.
1. On the Home screen or list menu, tap.
2. Tap Location access.
3. Turn on Access to my location.
Find your location
1. On the Home screen or list menu, tap.
2. Tapto find your location on the map.
If you are in an area where there are a lot of surrounding buildings, Locations may have a
hard time pinpointing your location.
Search for a place
1. On the Home screen or list menu, tap.
2. Tap.
3. Enter the place you want to search for.
4. Select the desired place in the result list.
Get directions
1. On the Home screen or list menu, tap.
2. Tapto get directions.
3. Choose how you want to get to your destination.
4. Enter your start point and end point.
5. The map opens showing the route to your destination.
destination. It also provides a search tool where you can locate places of interest or an address on
a map, or view locations at street level.
The Google Maps app does not cover every country or city.
Find a location
You can search for a name of an establishment, street, or city. Suggested matches will be shown
while you type.
Maps settings
You can set up the Google Maps, tap> Settings while viewing the maps.
User Manual MultiPad PMT3408_4G
Page 31
26
Z
12. Utilities
Clock
12
Use the clock app to set alarms, check the time of any location in the world,
• On the Home screen or list menu, tap.
World clock
You can add a city to the world clock screen.
1. On the Home screen or list menu, tap.
2. Tap .
3. Scroll through the list and tap the city that you want to add.
Alarm
You can set up one or more alarms.
Set an alarm
1. On the clock screen, tap.
2. Tap+to add a new alarm.
3. Use the virtual digit keyboard to set the alarm time.
4. Tap OK.
5. If you want the alarm for multiple days, tap Repeat.
Turn off an alarm
1. Select the alarm you want to turn off.
2. Drag the slider to Off.
Stop an alarm
When the alarm rings,
- Slide to: The alarm stops.
-
Slide to
Z
Z
: The alarm will sound again after a specific length of time.
Delete an alarm
1. Tap and hold the alarm you want to delete.
2. Tap.
Calendar
You can create events and make plans on your calendar.
• On the Home screen or list menu, tap. Tapto change your calendar to day, week, month
1. Go to, select a date.
2. Tapto create a new event.
3. Edit reminder settings.
4. Tap Done to save the event.
measure the duration of an event, or set a timer.
or agenda view.
Create an event
UserManual MultiPad PMT3408_4G
Page 32
27
Manage your events
Edit an event
You can only edit events you have created.
1. While viewing your calendar, tapto change it to agenda view.
2. Tap the event your want to edit, and then tap.
3. Make changes to the event.
4. Tap Done.
• Select the event your want to delete, and then tap.
Clear all events
• Go to, and then tap > Clear events.
Share an event
1. While viewing the calendar, tapto change your calendar to Agenda view.
2. Select the event your want to share, and then tap.
3. Choose how you want to send the event.
Delete an event
You can share a calendar event as a vCalendar via Bluetooth or as a file attachment via an e-mail
or a message.
UserManual MultiPad PMT3408_4G
Page 33
28
13
13.
Set up your tablet
Use this app to control and customise your tablet's settings .
- On the Home screen or list menu, tap.
Wireless & Networks
Wi-Fi
Bluetooth
Activate the Bluetooth feature to exchange information over short distances.
Data usage
Keep track of your data usage amount, and customise the setting for a limitation.
More...
Set up the following items.
• Airplane mode
• VPN
Set up and manage virtual private networks (VPNs).
• Tethering & portable hotspot
- Set to use your device as a wireless modem by making a USB connection with a computer.
- Set to use your device as a wireless access point for other devices.
- Activate the Bluetooth tethering feature to share your mobile network with computers via
• Mobile networks
-
Data connection: Use to allow packet switching data networks for network services.
- Data roaming: Use the device to connect to another network when you are roaming or your
- Network mode: Selected a preferred network mode.
- Access Point Names: Set up access point names (APNs).
- Use only 2G networks to save battery.
-
Network operators: Search for available networks and select a network for roaming.
Device
Sound
- Select the audio profiles for your tablet.
- Set the volume, type of ringtone and notification.
Display
Change the settings to control the display and backlight on your device.
Activate the Wi-Fi feature to connect to a Wi-Fi network and access the Internet or other network
devices.
Activate airplane mode to disable all wireless functions on your device. You can use only
nonnetwork features.
Airplane mode disables the wireless features in order to reduce potential interference with
aircraft operations and other electrical equipment.
Bluetooth.
home network is not available.
UserManual MultiPad PMT3408_4G
Page 34
29
Storage
View memory information for your device and memory card. You can also format the memory
The actual available capacity of the internal memory is less than the specified capacity
because the operating system and default applications occupy part of the memory.
Battery
View the amount of battery power consumed by your device.
Apps
Personal
Location access
Select the sources to use when determining your location.
- Access to my location: Set to use Wi-Fi and/or mobile networks for finding the current
-
GPS satellites: Set to use the GPS satellite for finding the current location.
- Wi-Fi & mobile network location: Let apps use Google's location service to estimate your
Security
Set a screen lock or manage the credential storage.
Language & input
Set the operating system language and region. You can also set on-screen keyboard options.
Backup & reset
Change the settings for managing settings and data.
- Back up my data: Set to back up settings and application data to the Google server.
- Backup account: Set up or edit your Google backup account.
- Automatic restore: Set to restore settings and application data when the applications are
- Factory data reset: Reset settings to the factory default values and delete all data.
Accounts
Add and manage your e-mail, Google, Face-book and Twitter accounts.
System
Date & time
Access and alter the following settings to control how the device displays the time and date.
-
Automatic date & time: Automatically update the time and date when moving across time
- Automatic time zone: Set to receive time zone information from the network when you move
- Set date: Set your local date manually.
- Set time: Set your local time manually.
card.
Formatting a memory card permanently deletes all data from it.
Manage running applications, move applications to or from the storage card, and install or
uninstall programs.
location.
location faster.
reinstalled on the device.
zones.
across time zones.
User Manual MultiPad PMT3408_4G
Page 35
30
- Select time zone: Set your local time zone.
- Use 24-hour format: Display time in 24-hour format.
- Choose date format: Select a date format.
Accessibility
Use these settings when you have downloaded and installed an accessibility tool, such as a screen
About tablet
reader that provides voice feedback. You can turn accessibility functions or services on or off.
Access device information and update device software. View different information about the
tablet, such as the battery, legal information, model number, software version, baseband version
and build number.
User Manual MultiPad PMT3408_4G
Page 36
User Manual MultiPad PMT3408_4G
31
14.
Specifications
14
Page 37
32
15.
Specific Absorption Rate
Information
International standards
Your mobile tablet is a radio transmitter and receiver. It is designed and manufactured not
The highest SAR value for this PMT3341_3G model when tested for compliance against the
standard was 0.796 W/kg (10g) for ICNIRP recommendation. For limiting the radio waves
exposure, it is recommended to reduce the mobile tablet call duration or to use a headset. The
purpose of those precautions is to take the mobile tablet away from the head and the body.
THIS MOBILE Tablet MEETS THE INTERNATIONAL RECOMMENDATIONS FOR EXPOSURE TO RADIO
WAVES.
to exceed the limits for exposure to radio frequency (RF) energy defined by the international
standards. These recommendations have been established by the International Commission
on Non-Ionizing Radiation Protection (ICNIRP) and, the Institute of Electrical and Electronics
Engineers (IEEE) that forecast a substantial safety margin for assuring the protection of all
persons, regardless of age and health. The exposure recommendations for mobile tablets use a
measurement unit known as the Specific Absorption Rate (SAR). The SAR limit recommended by
the ICNIRP for the mobile tablets used by the general public is 2.0W/kg averaged over ten gramsof tissue and, is 1.6W/kg averaged over one gram of tissue by IEEE Std 1528 for the head. Tests
for SAR have been conducted using recommended operating positions with the mobile tablet
transmitting at its highest certified power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR levels of the mobile tablet while
operating are generally below the maximum SAR value. This is because the tablet is designed to
operate at multiple power levels so as to use only the power required to reach the network. In
general, the closer you are to a base station antenna, the lower the power output. While there
may be differences between the SAR levels of various tablets and at various positions, they all
meet the international protection standards for exposure to radio waves.
15
UserManual MultiPad PMT3408_4G
Page 38
33
16
16.
Troubleshooting
The display shows BLOCKED when you switch on the tablet
Somebody tried to use your tablet but did not know the PIN code nor the
The display shows IMSI failure
This problem is related to your subscription. Contact your operator.
The network symbol is not displayed
The touch screen responds slowly or improperly
- Remove any protective covers from the touch screen. Protective covers may prevent the
- Ensure that your hands are clean and dry when tapping the touch screen.
- Restart your device to clear any temporary software bugs.
- Ensure that your device software is upgraded to the latest version.
- If the touch screen is scratched or damaged, take it to your local dealer.
Your battery seems to over heat
Your tablet does not display the phone numbers of incoming calls
You can not send text messages
You can not receive and/or store JPEG pictures
You feel that you have missed some calls
Check your call divert options.
When charging, the battery icon shows no bar and the outline is flashing
unblocking code (PUK). Contact your service provider.
The network connection is lost. Either you are in a radio shadow (in a tunnel or between tall
buildings) or you are outside the network coverage area. Try from another place, try to reconnect
to the network (especially when abroad), or contact your network operator for assistance/
information.
If your device has a touch screen and the touch screen is not responding properly, try the
following:
device from recognising your inputs and are not recommended for touch screen devices.
You might be using a charger that was not intended for use with your tablet. Make sure you
always use the authentic accessory shipped with your tablet.
This feature is network and subscription dependent. If the network does not send the caller’s
number, the phone will display Call 1 or Withheld instead. Contact your operator for detailed
information on this subject.
Some networks do not allow message exchanges with other networks. First check that you have
entered the number of your SMS centre, or contact your operator for detailed information on this
subject.
A picture may not be accepted by your tablet if it is too large, if its name is too long, or if it does
not have the correct file format.
Only charge the battery in an environment where the temperature does not go below 0°C (32°F)
or above 45°C (113°F). In other cases please contact your tablet supplier.
UserManual MultiPad PMT3408_4G
Page 39
34
The display shows SIM failure
Check that the SIM card has been inserted correctly. If the problem persists, your SIM card may be
Your tablet does not work well in your car
Check with the local authorities whether or not you are allowed to use the tablet while driving.
Your tablet is not charging
The picture captured with the tablet camera is not clear
Make sure that the camera lens on both sides is clean.
When you turn on your device or while you are using the device, it prompts you to enter one of
the following codes:
-
Password: When the device lock feature is enabled, you must enter the password you set for
the device.
-
PIN: When using the device for the first time or when the PIN requirement is enabled, you
must enter the PIN supplied with the SIM or USIM card. You can disable this feature by using
the Lock SIM card menu.
-
PUK: Your SIM or USIM card is blocked, usually as a result of entering your PIN incorrectly
several times. You must enter the PUK supplied by your service provider.
-
PIN2: When you access a menu requiring the PIN2, you must enter the PIN2 supplied with the
SIM or USIM card. For details, contact your service provider.
Your device freezes or has fatal errors
Others cannot hear you speaking on a call
- Ensure that you are not covering the built-in microphone.
- Ensure that the microphone is close to your mouth.
- If using a headset, ensure that it is properly connected.
Error messages appear when launching the FM radio
Another Bluetooth device is not located
- Ensure that the Bluetooth wireless feature is activated on your device.
-
Ensure that the Bluetooth wireless feature is activated on the device you wish to connect to,
- Ensure that your device and the other Bluetooth device are within the maximum Bluetooth
damaged. Contact your operator.
A car contains many metallic parts that absorb electromagnetic waves which can affect the
tablet’s performance. A car kit is available to provide you with an external antenna and enables
you to make and receive phone calls without handling the handset.
If the battery is completely flat, it might take several minutes of precharge (up to 5 minutes in
some cases) before the charging icon is displayed on the screen.
If your device freezes or hangs, you may need to close programs or reset the device to regain
functionality. If your device is frozen and unresponsive, press and hold the Power button for 8-10
seconds. The device reboots automatically.
If this does not solve the problem, perform a factory data reset. On the list menu, tap Settings >
Back up & reset > Factory data reset > Reset device > Erase everything.
The FM radio application on your tablet uses the headset cable as an antenna. Without a headset
connected, the FM radio cannot receive radio stations. To use the FM radio, first ensure that the
headset is properly connected. Next, scan for and save the available radio stations.
if necessary.
range (10 m).
UserManual MultiPad PMT3408_4G
Page 40
35
A connection is not established when you connect the device to a computer
- Ensure that the USB cable you are using is compatible with your device.
- Ensure that you have the proper drivers installed and updated on your computer.
- If you are a Windows XP user, ensure that you have Windows XP Service Pack 3 or higher
installed on your computer.
- Ensure that you have Windows Media Player 10 or higher installed on your computer.
User Manual MultiPad PMT3408_4G
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.