![](/html/45/454b/454b2a07245e46db33ceb9eb3b169b41b29ae5a26558af51ff50bba54fdaed81/bg2.png)
2"
Venus W36 LED Moving Wash – User Manual
TABLE OF CONTENTS
1. Summary 3!
Product Introduction 3"
Content List 3"
2. Safety Information 3!
Safety notes 3"
Safety instructionS 4"
3. Product diagram 4!
4. Features 5!
5. DMX Control 6!
14CH 6"
10CH: 7"
6. Display Operation Instructions 8!
7. Menu InstructionS 9!
8. XLR cable connecting 10!
XRL cable 10"
9. Wiring Diagram 11!
10. Trouble Shooting 12!
11. Technical Specifications 13!
![](/html/45/454b/454b2a07245e46db33ceb9eb3b169b41b29ae5a26558af51ff50bba54fdaed81/bg3.png)
3"
Venus W36 LED Moving Wash – User Manual
1. SUMMARY
Thank you for purchasing our Venus W36 LED Moving Wash. Please read these
instructions carefully before operating the system to avoid any possible damage or
misuse.
PRODUCT INTRODUCTION
The Venus W36 LED Moving Wash has a light source that uses 36 high powered 4-
in-1 10W LED lights, each made up of R, G, B, and W LEDs which can be
independently dimmed and altered. This fixture has a long life span, low power
consumption, good colour mixing effects and high brightness. The built-in programs
include dimming, strobe, gradual change, fading etc. settings. It is recommended that
an international standard DMX 512 signal is used for best results.
.
CONTENT LIST
o LED moving head light (x1)
o Bracket (x1)
o DMX signal cable (x1)
o Power in cable (x1)
o The user manual (x1)
o Warranty Card (x1)
2. SAFETY INFORMATION
SAFETY NOTES
Seek advice from a professional prior to authoring any repairs
Always ensure the system is disconnected from the power source before assembling,
deconstructing and moving
Avoid direct eye exposure when in use
![](/html/45/454b/454b2a07245e46db33ceb9eb3b169b41b29ae5a26558af51ff50bba54fdaed81/bg4.png)
4"
Venus W36 LED Moving Wash – User Manual
SAFETY INSTR UCTIONS
Ensure the power supply voltage corresponds with the required voltage for the lights,
and is within the range of the requested technical restrictions.
Before installing, check the lights’ fasteners and mechanical structures are in good
condition and there is no apparent damage.
This light is designed for indoor and outdoor use, however the working
temperature must be kept below 50 degrees.
The fixtures can be mounted in any position, provided there is adequate room for
ventilation. Make sure there are no inflammable and explosive items within 0.5 meters
of the fixture.
The yellow/green cables are for earthling safety. These should not flicker when fixture
is in use.
3. PRODUCT DIAGRAM