HD Color Box Camera
The user manual
V1.8 edition
（Englishedition）
Contents
1 Notes...........................................................................................................................2
2 Main Features .............................................................................................................2
3 Standard Accessories ..................................................................................................2
4 Interface description ...................................................................................................3
5 OSD Menu Operation .................................................................................................4
6 Serial port command ..................................................................................................7
7 Network Contro ..........................................................................................................8
8 Maintenance and.........................................................................................................9
9 Fault phenomenon and processing .............................................................................9
10 Standard Specification ............................................................................................10
11 Dimension............................................................................................................... 11
12 Copyright Notice .................................................................................................... 11
1
1 Notes
● Electric Safety
Installation and oper ation must accord With
electric safety standard.
● Caution to transport
Avoid stress, vibration and soakage in
transport, storage and installation.
● Polarity of power supply
The power supply of the product is +12V,
the max electrical current is 2A .Polarity of the
power supply plug drawing as follows.
● Careful of inst allation
Do not grasp the camera head when carrying
the camera. Don’t tu rn camera head by hand.
2 Main Features
● Highest resol ution 1920 x1080, outpu t Full
HD 1080p real-time image.
● Advanced coding technology, time delay
within 200 ms.
● Support HD-SDI interface, the effective
transmission distance up to 200 meters.
● High SNR of CMOS senso r, sensitivity high,
low-light good.
● Support 2D and 3D noise reduction.
● ICR infrared filter plate automatic switch,
achieve monitoring day and night.
● Support PoE powe r supply
● Supports dual st ream.
● Support automatic apertu re, automatic
electronic shutter, adapt different monitoring
environment.
● Support SDK.
Doing so may result in mechanical damage.
Never power on before installation is not
completed.
● Don’t dismantle the camera
We are not responsible for any unauthorized
modification or dismantl- eing.
CAUTION!
The specific frequency of electromagnetic
field may affect the image of th e camera!
3 Standard Accessories
When opened the package, pl eas e check
and confirm that all attachments shall be
provided:
HD color gun type camera x1
The user manual x1
Certificate/warranty card x1
2
4 Interface description
● Camera appearance
1. Lens focal adjustment after fixed screw
holes
2. Lens mounting position (only for C / CS
lens *)
3. Aperture control interface (only applicable
DC automatic aperture)
4. The installation location hole
5. Fuselage
Operating tips
Both sides threaded hole is consistent with
the positioning hole size, installation can be
used instead of each o ther.
Notice
● Use C camera lens, you need to use special
adapter ring.
● The back of the interface specifications
1. power interface
Connect external adapter, 12V power
supply.
2. power light
3. OK key
4. Up select key
5. Internet interface
Internet interface for 10/100 m adaptive
Ethernet interface, through the interface be
connected with various internet Settings, such
as hubs, routers, switches etc.
6. HD-SDI interface
7. Right select key
8. Down select key
9. Left select key
10. RS485 interface
Operating tips
Press "OK" button and then to electricity
and keep holding down the "OK" button 8
3
seconds, the camera will restore factory
Exit
Settings.
MENU
Exposure
5 OSD Menu Operation
● Key Description
The camera USES five but to ns , respect ivel y,
to determine key [OK] , select key 【 】 up
and down, left and right sides choose key "
【
】; Under normal image press "OK" key,
the screen displays the main menu, press
【
】, from top to bottom cycle options
menu item and press 【
options, use a scroll arrow or highlight the
selected item, press menu button "OK" to
highlight the menu item; Each menu page h as a
"Return" option, to Return to the superior
menu or exit the menu.
● MENU
Directly press "OK" button to enter the main
menu.
】 select menu
Color
Image
N oise Reduction
Setting
Information
R es tore Factory Settings
Operating tips
Use the select key up and down【 】
Choose a menu item, press【OK】 to enter
submenu.
choose[Exit]press【OK】 to
● EXPOSURE
EXPOSURE
Mode Full Auto
ExpCompMod Off
Backlight Off
exit menu.
DRC Strength 4
Anti Flicker 50Hz
Lens Manual
Return
Operating tips
Mode: Set the camera exposure mode,
Optional items: Full Auto, Bright, Shutter
Priority.
4
Shutter: Set the Shutter values, only when
● COLOR
the Mode for the Shutter Priority Mode
effective, Optional items: 1/10000s,1/6000s,
1/4000s,1/3000s,1/2000s,1/1500s,1/1000s,1/72
5s,1/500s,1/350s,1/250s,1/200s,1/125s,1/100s,
1/90s,1/60s,1/30s.
Bright: Set the brightness values, only when
the effective Mode for Brigh t Mode, Optional
items: 0 ~ 17.
ExpCompMode: Set the exposure
compensation mode, Optional items: On, Off.
ExpComp: Set the exposure compensation
value, only when ExpCompMode item to On
effective, Optional items: -7 ~ 7.
Backlight: Set the backlight compensation,
Optional items: On, Off.
DRC Strength: Set up digital wide dynamic
strength, can set up different levels of wide
dynamic effect, Optional items: 0 ~ 8.
Anti Flicker: Set the flashing function,
Optional items: 50Hz, 60Hz, Off.
Lens: Set lens mode, Optional items:
Manual, DC.
Return: get back
COLOR
WB Mode Auto
Saturation 140%
Hue 7
AWB Sens Low
Style Fujifilm(301)
Return
Operating ti ps
WB Mode: Set the camera white balance
mode, Optional items: Auto, 3000K(Indoor),
4000K,5000K(Outdoor),6500K-1,6500K-2,65
00K-3,One Push WB(ok), Manual.
R Gain: Adjust the camera white balance
mode of red gain, are ef fective only when the
white balance mode to Manual, Optional items:
0 ~ 255.
B Gain: Adjust the camera white balance
mode of blue gain, are effective only when the
white balance mode to Manual, Optional items:
0 ~ 255.
Saturation: Color saturation adjustment,
Optional items: 60% ~ 200%.
Hue: Chroma adjustment, Optional items:
5
0 ~ 14.
AWB Sens: The white balance sensitivity,
Optional items: Low, Middle, High.
Style: Optional items: Ricom, Fujifilm(301),
Fujifilm(300), Fujifilm(500),HE45.
Return: get back.
● IMAGE
Return: get back.
● NOISE REDUCTION
NOISE REDUCTION
2D NR 3
3D NR 3
Return
IMAGE
Luminance 6
Contrast 7
Sharpness 1
Flip-H Off
Flip-V Off
LDC Off
Return
Operating tips
Luminance: Brightness adjustment, Optional
items: 0~14.
Contrast: Contrast adjustment, Optional
items: 0~14.
Sharpness: Sharpness adjustment, Optional
items: Auto, 0~15.
Flip-H: Image flipped horizontally. Optional
items: On, Off.
Flip-V: Image Flip Vertical. Optional items:
On, Off.
LDC: Lens distortion correction, Optional
items: 1~10, Off.
Operating tips
2D NR: 2D noise red uction, Optional items:
1 ~ 5, Close, Auto.
3D NR: 3D noise reduction, Optional items:
1 ~ 8, Close.
Return: get back.
● SETTING
Protocol VISCA
Visca Address 1
Baudrate 9600
Video Format 1080P30
EPTZ Off
Return
Operating tips
Language: Language Settings, Optional
items: English, Chinese.
Protocol: Communication protocol Settings,
Optional items: VISCA, PELCO-D, PELCO-P.
SETTING
Language English
6
Visca Address: Address of the Visca
ent to
Settings, Optional items: 0 ~ 7.
P-D Addr ess: P-D address settings, valid in
PELCO-D mode, Optional items: 0~254.
P-P Address: P-P address settings, valid in
PELCO-P model, Optional items: 0~31.
Baudrate: Camera baud rate Settings,
RESTORE FACTORY SETTINGS
Yes
No
Return
Optional items: 38400,19200, 9600,4800,2400.
Video Format: Camera system Settings,
Optional items: 1080P30, 1080P25, 1080I60,
1080I50, 720P60, 720P50.
EPTZ: e-PTZ, Optional items: On, Off.
Zoom Limit: Optional items: 1.5x, 2x, 3x,
4x, 8x.
Return: get back.
● INFROMATION
INFORMATION
Version 1.53D-H
Data 2015-07-02
IP 192.168.100.88
Gateway 192.168.100.1
Netmask 255.255.255.0
Return
● RESTORE FACTORY SETTINGS
Operating tips
Yes: verify, press【OK】to restore factory
Settings.
No: cancel, press【OK】to back to menu.
Return: get back.
6 Serial port command description
● Serial port control
Camera on the electric initialization
complete, available command (VISCA) with
RS485 and RS232 serial port for
communication. The camera provides the
following commands to control menu:
function command packet Notes
UP
DOWN
LEFT
8x 01 06 01 08 08 03 01
FF
8x 01 06 01 08 08 03 02
FF
8x 01 06 01 08 08 01 03
FF
Equival
the back
four
directio
n keys.
7
RIGHT
ent to
8x 01 06 01 08 08 02 03
FF
Equival
8x 01 04 0B 02 FF
OK
或
8x 01 04 0B 03 FF
the back
【 OK 】
key.
x:Camera address.
7 Network Contro
1. View from Web browser (better in IE)
● To view from web browser, firstly need
to check camera IP ad dress.Connect camera to
PC with ethernet cable, use upgrade software
to search for IP address(If you need the
upgrade software, please contract the
manufacturer)
Method 2: Open "upgrade_En.exe", change
IP and click "Set"
● Please enter the IP add ress, username,
password to web browser you have got via the
above methods, then enter network
control/viewing.
2. Change IP address,2 methods as below:
Method 1: On web control page, find
"Network"--->Change IP---->Click "Apply"
----> Restart camera
3. Once IP changed, need to restart the camera.
2 methods to restart as below:
Method 1: Turn off and turn on manually
to restart camera
Method 2: On web page, find "System"
8
and click "Apply" (when under remote
controlling environment, better use this
method)
Operating tips
Default IP address: 192.168.100.88
● The camera should avoid using at the
following specific situation
Camera should avoid shooting especially
bright objects, such as sunshine, lamplight, etc.
The camera don't work in lighting conditions
unstable environment, otherwise the image will
happen.
Don't can launch a large power of the
facilities around the use of radio waves, such
as television or radio transmitters, etc.
8 Maintenance and troubleshooting
● Maintenance of the camera
If the camera is not used for a long time,
after use, please disconn ect the power switch,
at the same time the ac power adapter and ac
socket to disconnect .
Clear the dust on the camera ho usin g, please
use soft cloth or cotton paper.
Clean the camera lens, please use dry soft
cloth to wipe, such as dirt serious when, please
use neutral detergent wipe gently. Don't use
strong or with corrosive cleaner, so as to avoid
the lens scratches, influence the image effect;
● Beyond the camera work intensity of
illumination
Camera may be more than camera work
intensity of illumination, the image cannot
achieve the best effect.
9 Fault phenomenon and processing
9.1 Images
● Display shows no image
1,Check whether the camera power supply is
connected and the vo ltage is normal, whether
the power light shine.
2,Check whether video platform, TV cable
connection is normal
3,Check for manual lens aperture and open the
aperture.
● Sometimes there is no i mage
1, Check whether video platform, TV cable
connection is normal.
2, check whether the camera in stallat ion safety,
if there is a strong shock.
● image blurring
1, Check whether the installation.
2, Check whether the lens focusing accurately.
9
● When modify IP address in an incorrect way
One Push
Support auto/manual white
A key recovery, flicker, double
1x,RJ45:10M/100M adaptive
x port,
WB(ok), Manual
cause the wrong IP address or forget web
passwords, press OK button 2 s to restore the
default value (Default IP: 192.168.100.88
Default username: admin Default password:
admin),restart pages times will have image.
9.2 Control
Serial port can't control
1, The camera control parameters is set up
correctly.
2, Check whether control line connection is
good.
10 Standard Specification
Model
parameter
Camera
Video System
Sensor Type
Scanning Mode Progressive
Lens C/CS lens
Auto Iris DC
minimal
illumination
shutter 1s ~ 1/10000s
white balance
HD Color Box Camera
1080i/60,1080i/50,1080p/30,108
0p/25,720p/60,720p/50
1/2.7", CMOS, Effective pixel:
2.07M
0.05 Lux @ (F1.2, AGC ON)
Auto, 3000K(Indoor), 4000K,
5000K(Outdoor),6000K,6500K_
1,6500K_2,6500K_3,
Day-night mode ICR Infrared filter plate
Digital noise
reduction
Backlight
compensation
Video standard H.264
Video rate 32 Kbps~8Mbps
Audio standard AAC
Audio rate 96K, 128K, 256K
Control mode
Auto/manual
control
Support protocols
Interface protocols ONVIF,SDK etc
General function
Video output 1x,HD-SDI:75Ω/BNC
Internet
Communication
interface
Power Connector JEITA（DC IN 12V）
Reset Button Support
2D&3D Digital noise
reduction
Support
Support control port and
internet control method
balance,auto/manual
exposure(aperture , shutter,
gain), fixed focus
TCP/IP,HTTP,DHCP,DNS,RTP,
RTMP,RTSP,NTP,QoS,802.11X
(Optional)
stream, heartbeat, mirror,
password etc
Ethernet ports
1xRS-485: 2pin Phoeni
Max Distance: 1200m, Pr otocol:
VISCA/Pelco-D/Pelco-P
10
General specification
Input Voltage DC 12V DC
Current
Consumption
Operating
Temperature
Storage
Temperature
Power
Consumption
Size 127.5mm x 72.0mm x 60.0mm
Weight 0.5Kg
0.4A（Maximum）
-15°C ~ 60°C
-20°C ~ 80°C
4.8W
11 Dimension
front view
top view
12 Copyright Notice
All contents of this manual, whose copyright
left view
belongs to our Corporatio
copied or translated without the permission of
the company. Product specifications and
information which were referred to in this
document are for reference only, and the
content will be updated at any time without
prior notice. All rights reserved, infringement.
n. Cannot be cloned,
2015/7
11
Loading...