Pressol PNEUMAxx Operating Instructions
88103 A401 GB
Grease Guns
PNEUMAxx
Lever Operated Grease Gun ● One Hand Operated Grease Gun ●
Air Operated Grease Gun
Operating Instructions
Contents:
1. General Data
1.1 Recommended Usage
1.2 Structure and Application Description
1.3 Technical Data
1.4 Recommended Operation Areas
2. General Safety Instructions
2.1 Safety Requirements
2.2 Explanation of the General Safety
Instructions
2.3 Dangers when utilizing the Grease Gun
3. Assembly
4. Initial or Repeated Operation
4.1 Filling of the Grease Gun
4.2. Readiness for Service
5. Standard Operation
5.1 Change of Cartridges
6. Maintenance/Service
7. Repair/Service
8. Declaration of the Manufacturer
Grease Guns PNEUMAxx Operating Instructions
2 Issue 08.10.13
1. General Data
1.1 Recommended Usage
The grease gun PNEUMAxx is exclusively designed for the use of lubricating grease.
We ask you to follow up strictly the recommendations for usage shown in these operating
instructions.
Every further usage (other media or using force) or unauthorised modification (reconstruction,
no original accessories) may cause dangers and will not be covered by our warranty
regulation. The operator is liable for damages caused by non-authorized operations.
1.2 Structure and Application Description
PNEUMAxx is a grease gun with a manually operated air pump supporting the grease flow
into the grease gun head.
PNEUMAxx can be completed with various accessories (with PRESSOL parts).
PNEUMAxx is available in the following versions:
Lever Operated Grease Gun, HHFP
One Hand Operated Grease Gun, EHFP
Air Operated Grease Gun, DLFP
1.3 Technical Data
HHFP
EHFP
DLFP
Supply pressure (load pressure into
the grease gun head):
4 bar
4 bar
4 bar
Grease supply (load pressure):
manually air pressurized
manually air pressurized
manually air pressurized
Diameter of piston:
8 mm
8 mm
6 mm
Operation of the grease piston:
manually lever operated
manually lever operated
air operated providing a
continuous grease flow
Maximum air pressure:
- - 8 bar
Delivery volume per stroke:
1,2 cm
з
0,8 cm
з
0,8 cm
з
Operating pressure:
up to 400 bar
up to 260 bar
at the point of lubrication:
from 100 up to 400 bar
Connection for accessories utilizing a
steel connector:
M 10 x 1 or G ⅛“
M 10 x 1 or G ⅛“
M 10 x 1 or G ⅛“
Burst pressure (system):
850 bar
850 bar
850 bar
Burst pressure (grease gun head):
1200 bar
1200 bar
1200 bar
Capacity:
500 cm
з
500 cm
з
500 cm
з
Loading:
400 g grease cartridge
(DIN 1284)
grease gun filling pump
400 g screw-in cartridge (to
be utilized with separately
ordered adapter only)
400 g grease cartridge
(DIN 1284)
grease gun filling pump
400 g screw-in cartridge (to
be utilized with separately
ordered adapter only)
400 g grease cartridge
(DIN 1284)
grease gun filling pump
400 g screw-in cartridge (to
be utilized with separately
ordered adapter only)
Grease Guns PNEUMAxx Operating Instructions
Issue 08.10.13 3
1.4 Recommended Operation Areas
The grease gun PNEUMAxx is designed to be utilized with lubricating grease up to a viscosity
class NLGI 3 at a minimum temperature down to –10 ºC.
The grease gun can be filled with standard grease cartridges according to DIN 1284 or with a
grease gun filling pump (utilizing an empty cartridge placed in the grease gun tube).
Screw-in cartridges can be processed with an adapter which is available as an accessory,
PRESSOL article no. 12 091.
2. General Safety Instructions
2.1 Safety Requirements
The grease gun PNEUMAxx is designed and manufactured with regards to the general safety
and health requirements and according to the relevant European Community regulations.
However, risks cannot be avoided if this product will not be used according to the
recommended usage or when utilizing it without the necessary diligence and care.
To prevent accidents we recommend to use our product strictly according to the local safety
regulations and as well according to our safety instructions shown in these operating
instructions.
2.2 Explanation of the General Safety Instructions
When studying these General Safety Instructions please consider the different levels of danger.
These levels of danger are marked by the following signal terms or pictograms:
Pictogram
Signal term
Consequences when ignoring the General Safety Instructions.
Attention!
Potential minor or medium personal harm or material-damages.
Table. 2-1: Classification of the safety instructions according to the kind of the dangers
Furthermore, an other advise for the operation of this product is also used.
Pictogram
Signal term
Consequences when ignoring the General Safety Instructions.
Note
Basic knowledge and advises for the correct operation of this product.
Table 2-2: General Advise
Loading...