PRESIDENT Grant II Owner's Manual

Owner's manual

Your PRESIDENT GRANT II ASC at a glance

SUMMARY

INSTALLATION
HOW TO USE YOUR CB
TECHNICAL CHARACTERISTICS
TROUBLE SHOOTING
HOW TO TRANSMIT OR RECEIVE A MESSAGE
GLOSSARY
CERTIFICATE OF CONFORMITY
FREQUENCY TABLES
NORMS - F

English

WARNING !

MULTI-NORMS TRANSCEIVER!

Before using, be careful never to transmit without
first having connected the antenna (connection
"B" situated on the back panel of the equipment)
or without having set the SWR (Standing Wave
Ratio) ! Failure to do so may result in destruction
of the power amplifier, which is not covered by
the guarantee.

See function “F” on page 32 and the Con-

figuration table on page 53.

The guarantee of this transceiver is valid only in the country of purchase.

English

Welcome to the world of the new generation of CB radios. The new
PRESIDENT range gives you access to top performance CB equipment. With the
use of up-to-date technology, which guarantees unprecedented quality, your
PRESIDENT GRANT II ASC is a new step in personal communication and is the
surest choice for the most demanding of professional CB radio users. To ensure
that you make the most of all its capacities, we advise you to read carefully this
manual before installing and using your PRESIDENT GRANT II ASC.

A) INSTALLATION

1) WHERE AND HOW TO MOUNT YOUR MOBILE CB RADIO

a) You should choose the most appropriate setting from a simple and practical

point of view.

b) Your CB radio should not interfere with the driver or the passengers.
c) Remember to provide for the passing and protection of different wires (e.g.

power, antenna, accessory cabling) so that they do not in any way interfere
with the driving of the vehicle.

d) To install your equipment, use the cradle (1) and the self-tapping screws (2)

provided (drilling diameter 3.2 mm). Take care not to damage the vehicle’s
electrical system while drilling the dash board.

- N.B. : As the transceiver has a frontal microphone socket, it can be set into

the dash board. In this case, you will need to add an external loud speaker
to improve the sound quality of communications (connector EXT.SP situated
on the back panel: C). Ask your dealer for advice on mounting your CB radio.

2) ANTENNA INSTALLATION

a) Choosing your antenna

- For CB radios, the longer the antenna, the better its results. Your dealer will
be able to help you with your choice of antenna.

b) Mobile antenna

- Must be fixed to the vehicle where there is a maximum of metallic surface
(ground plane), away from windscreen mountings.

- If you already have a radio-telephone antenna installed, the CB antenna
should be higher than this.

e) Do not forget to insert the rubber joints (3) between the CB and its support as

these have a shock-absorbing effect which permits gentle orientation and
tightening of the set.

f) Choose where to place the microphone support and remember that the

microphone cord must stretch to the driver without interfering with the controls
of the vehicle.

English