PrepPal PPG-22, PPG-12 Owner's/operator's Manual

OWNER /OPERATOR
MANUAL
Models
PPG-12 1 HP, #12 Meat Grinder PPG-22 1.5 HP, #22 Meat Grinder
IMPORTANT NOTICE
This manual contains Important Safety Instructions which must be strictly followed when using this equipment.
1
Safety Reminding
These precautions should be followed at all times. Failure to follow these precautions could
result in injury to yourself and others or damage the equipment.
Plug only into grounded electrical outlets matching the nameplate rated voltage. Do not modify or tamper with safety switches. Do not operate unattended. Do not operate equipment in public areas and/or around children. Should not permit
anyone to touch this equipment unless they are over 18 years old, are adequately trained and supervised, and have read understand this manual.
Do not use an extension cord with this equipment. Do not plug this equipment into a power
strip or multi-outlet power cord.
Non-PrepPal attachments are not recommended. They will not work properly and will void
the warranty.
Check equipment before each use to insure the equipment is clean. When cleaning your
chopper, pay particular attention to cracks, broken seams and any area that may collect food debris. If your chopper or any of its parts, is damaged or broken, it may become more difficult to properly clean and sanitize the unit, the user need to repair or replace damage or broken parts for good sanitation status.
Do not use a hose to clean mixer. Use a damp cloth to wipe down the exterior of the mixer. Unplug equipment, turn off and let it cool before cleaning or moving. Keep equipment and power cord away from open flames, electric burners or excessive heat. Do not operate if equipment has been damaged or is malfunctioning in any way.
2
Meat Grinder View and Key Components
Specification
Model
Productivity
(Lbs/Hr)
Blade Speed
(RPM)
Motor
(HP)
Voltage
Dimension
(mm/In)
Weight
(Kg/Lbs)
PPG-12
250 170 1 115v/60Hz/1p
470*340*480
(18.5*13.5*19)
NW:28(61)
GW:31(68)
PPG-22
450 170 1.5 115v/60Hz/1p
570*360*535
(22.5*14*21)
NW:35(77)
GW:38(84)
Feed Pan
Handle Cover
Fasten Screw
Reset Switch
Control Switch
Feed Stomper
Chopper header
Adjusting Ring
Rubber Feet
Loading...
+ 4 hidden pages