Prepac Queen, BQ-6200-3K, BQ-6212 Assembly Instructions Manual

Queen

Assembly Instructions

DATE STAMP

CALL US FIRST

1-877-PREPAC1
1-877-773-7221

Mon - Fri 7am - 4pm PST

10am - 7pm EST

• For help with assembly

• If you have received a damaged or

defective part or are missing hardware.

We will process replacement parts
business days or less. Parts are shipped via
UPS Ground or mail.

in 2

Platform Storage Bed

Model # BQ-6200-3K

This product is shipped in

3 cartons

1 of 3

+

Make sure you have all cartons.

Sometimes cartons shipped on the same

day get separated and are delivered on

2 of 3

+

different days.

3 of 3

Before you call please:

1) Record the following information from the
shipping label on the outside of the box.
You will need it for warranty purposes:

• Ship To Name

• Sales Order Number

2) Note the

3) Review the contents of your shipment to
determine what you are missing. This unit
is shipped in 3 cartons. Make sure you
have received all cartons.

Online Option:

Fill out the Replacement Parts Order form in the Product
Support section of our website: www.prepacmfg.com

product model number.

Required Tools

Screwdrivers

Hammer

Phillips Head

Flat Head

Optional Tools

Using a power screwdriver
will speed up assembly.

Caution

Do not over tighten any screw.
The last few turns of each screw
should be done very slowly or by hand.

Prepac Manufacturing Ltd.
6705 Dennett Place
Delta, BC V4G 1N4

LB-0625-R
2010-04-22

Hardware Identification

Bed Hardware

JRN Nut

(24)

RM-0312

Drawer Slides for Bed

JCB Connector

(24)

RM-0310 bronze (cherry / espresso)

RM-0311 chrome (white / maple)

RM-0314 black

LEFT Slide (6)

T Spacer

(24)

RM-0628

Drawer Slide Screw

(90)

RM-0074

Allen Key

(1)

RM-0313

4 per drawer

#8 - 1½” Hi Lo Screws

(24)

RM-0504

1 LEFT Drawer Slide per Drawer (Total = 6)

12mm Zinc Cam

(24)

RM-0715

RIGHT Slide (6)

Drawer Hardware

1 RIGHT Drawer Slide per Drawer (Total = 6)

5 per drawer

34mm Black Twister Dowel

(24)

RM-0500

¾” Nail

(30)

RM-0022

8 per drawer

Drawer Slide Screw

(48)

RM-0074

Page 2 of 20

Bed Parts

B5

B6

B3

B4

B1

B1

B2

B2

B3

B4

B1

Outer Gables (2)

GA-4120 black
GA-4920 cherry

GA-4620 espresso

GA-4720 maple
GA-4020 white

B2

Inner Gables (2)

GA-4108 black

GA-4908 cherry

GA-4608 espresso

GA-4708 maple
GA-4008 white

B3

Upper Stabilizer

ST-4120 black

ST-4920 cherry

ST-4620 espresso

ST-4720 maple

ST-4020 white

(2)

Lower Stabilizer

ST-4121 black

ST-4921 cherry

ST-4621 espresso

ST-4721 maple

ST-4021 white

B4

(2)

B5

B5

Plywood Slats (9)

BF-2000-PW

B6

Metal U-channel with

Blocks (2)

BF-3000-C

Page 3 of 20

STEP 1

Attach metal U-channels to each outer
gable using drawer slide screws

Estimated Time: 10 minutes

Drawer
Slide
Screw

STEP 2

Attach T spacers to outer gables with drawer slide screws.

Estimated Time: 15 minutes

Drawer
Slide
Screw

B1

B1

Page 4 of 20

STEP 3

Estimated Time: 10 minutes

Attach drawer glides to T-spacers on
outer gables as shown in the photo

Position the Drawer Glides with:
A) The wheel at the finished side
B) The wheel on the unfinished bottom

Finished
Side

Bottom

Use 14th hole

Use 1st hole

Use 1st hole

Use 14th hole

Page 5 of 20

STEP 4

Insert JRN nuts into the holes on each end of the inner gables.

The holes are drilled through. You can insert them from either side.

Estimated Time: 5 minutes

B2

B2

Insert the nut as shown, so that the
hole lines up with the hole on the
edge of the gable.

Page 6 of 20