Premier View 20-CM-32AH, 20-CM-32AHW Instruction Manual

Download

ver. 1.0 PRINTED IN KOREA

20-CM-32AH

20-CM-32AHW

REAR-VIEW FOR VEHICLE

Thank you for purchasing this product.

For proper usages and application,

Please read this instruction manual thoroughly.

INSTRUCTION MANUAL

※ Design and speci cations could be changed without notices.

CONTENTS

Safety Rules

1. Features

2. Box Contents

3. Installation

4. Connection

5. Cleaning & General maintenance

6. Speci cations

..................................................................................... 4

........................................................................................ 5

.............................................................................. 5

.................................................................................. 6

................................................................................. 7

...................................... 8

............................................................................. 9

4 5

■ 1/3” COLOR CCD image sensor

■ 6 pcs of IR LEDs for night

■ Audio Built-in

■ Waterproof (IP-66)

■ Heating function Built-in

■ Aluminum die-casting housing

■ Night vision using the CdS sensor

1 FEATURES

2 BOX CONTENTS

Camera Bracket

Camera

Instruction

Manual

Sun Visor

Extension Cable

70ft (22m)

Accessory Pack

WARNING

Please read the “Safety Rules” carefully before using this product. Following the

safety rules prevents users from damages related with the misuse of the product.

It is very important to follow these safety rules. We state “Caution” and “Warning”

to clarify any potential risk for a damage associated with the misuse of the product.

SAFTY RULES

May cause bodily harm or even death if the user ignores these warnings in the safety rules.

Warning

May cause a damage or shorten the life time of the product if the user ignores these cautions in the safety rules.

Caution

CAUTION

When the power cable cord touches a metal case, cover it with a insulation tape.

--- Short circuit or disconnection of wire may cause a  re or accident.

Do not use bolts or nuts from a parts for vehicle.

--- Using bolt or nuts from steering column or break may cause an accident.

Let professional engineers or the sale store install the camera.

--- It require the experience and skills from professional engineers for proper installation and wiring.

After installing the camera, check it break lamp, head lamp and wipe works properly.

Install this camera to the vehicle with DC 12V.

Do not dissassemble the device.

--- It may cause a  re or malfunction of device.

Do not install the camera projected out from the vehicle.

--- It may harm the pedestriants.

Do not let the extension cable pass through the seat rail. properly wire the cables.

--- It may cause a  re or and accident.

Do not install the camera bracket on the surface of glass.

--- Use the screws to install the camera bracket.

6 7

3 INSTALLATION

※ Based on the condition and place, the installation procedures

could be varied.

(1) Determine a position and a direction of installation so that the rear

view can be e ectively seen on the monitor screen.

(2) Fix the camera bracket to the vehicle using the provided adhesive

tape and tapping screws with spring washers.

(3) Fix the camera between the camera bracket and sunvisor using

machine screws and adjust the angle of camera and fasten the screws  rmly.

(4) Run the cable from the monitor to the camera.

Monitor (Option)

Extension Cable

70ft (22m)

Camera

4 CONNECTION

CAMERA CONNECTOR

1. POWER IN (DC +12V)

2. HEATING B+ (DC +12V)

3. N.C

4. VIDEO OUT

5. AUDIO OUT

6. NOR/MIR

7. GND

⑥

TAPPING SCREW T1 M4.0 X 10 (3ea)

SPRING WASHER M4 (3ea)

FLAT WASHER M4 (3ea)

⑤

Before making the connection, disconnect the ground terminal of the car battery to avoid short circuiting.

Before inserting plug, should check pin speci cation and the plug should insert to jack or connector  rmly. If forced insert wrong direction, it may cause malfunction.

When connect extension cable, turn it right direction as described arrow.

MACHINE SCREW M3.0 X 5 (2ea)

MACHINE SCREW M3.0 X 7 (4ea)

8 9

5 CLEANING & GENERAL MAINTENANCE 6 SPECIFICATION

※ If your vehicle has been parked in direct sun light resulting in a considerable

rise in temperature inside the vehicle, allow the unit to cool o before operating.

CLEANING

Unplug or power o mode before cleaning. Do not use liquid cleaners or aerosol ceaners. Use a damp cloth for cleaning.

OBJECT AND LIQUID ENTRY

Never push objects of any kind into this monitor equipment through holes as they may touch dangerous voltage points or short-out parts that could result in a  re of electric shock. Never spill liquid of any kind on the product.

SERVICING

Do not attempt to service this system by yourself as opening or removing covers may eapose you to dangerous voltage or other hazards. Refer all servicing to quali ed service personnel.

Operating temperature

-5℉ to 149℉ / -20℃ to 65℃

0.88lb (0.4kg)

Minimum illumination

0.01Lux

Image device (NTSC)

1/3” COLOR CCD Image Sensor

View of angle

95 (H) / 70(V) / 120 (D)

Input Voltage

DC 12V/200mA max

Camera Weight

Demension

2.7(W) x 1.7(H) x 2.2(D) inch

70(W) x 44(H) x 57(D) mm

Camera Bracket ----------------------------------------- 1

Accessories

Sun Visor -------------------------------------------------- 1

Extension Cable --------------------------------------- 1

Accessory Pack ---------------------------------------- 1