Prem-I-Air C307, C309, C3011T Instruction Manual

SERVICE & WARRANTY

Do not operate the unit with a damaged cord or plug, after the unit malfunctions, or
has been dropped or damaged. Return the product to an authorised service facility
for examination and repair to avoid a hazard.

For your convenience record the complete model number and product name
(located on the Product Identification Plate), the date you purchased the product
and your purchase receipt as proof of purchase.

To ensure your product is covered by warranty, the complete faulty product
together with your purchase receipt should be returned to your retailer.

This product has been manufactured to comply with

EEC Directives 73/23/EEC and 89/336/EEC

Please read these instructions carefully before use retain for future reference

0

5/05

OIL FILLED RADIATOR

MODEL

C307, C309 & C3011T

ONE (1) YEAR LIMITED WARRANTY

Save This Warranty Information

EHS (International) Ltd. Guarantees this product free from
defects in materials and workmanship for a period of one (1)
year.

Should this unit be operated under conditions other than those
recommended, at voltages other than the voltage indicated on
the unit, or any attempts made to service or modify the unit, will
render this WARRANTY VOID. The product you buy ma

y

sometimes differ slightly from illustration. This warranty is in
addition to, and does not affect, your statutory rights

Should you have a problem with this product, please call ou

r

Help Desk on: [phone].

C307 C309 C3011T

EHS, Manchester, M17 1RN

Please read this instruction manual before

operating and keep safe for future reference

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS
PRODUCT.

Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause a fire or electrical shock.

When using electrical appliances, basic safety precautions should always be
followed:

1. Before operating the heater remove the unit from its packaging and
check it is in good condition.

2. The surfaces of this heater are hot whilst in operation. Always allow a

cool down period before moving it to another location. Keep all

flammable materials well away from the heater.

3 . Extreme caution is necessary when any heater is used by or near children
or pets and whenever the heater is left operating and unattended.

4. Always unplug heater when not in use.

5. Do not operate any heater with a damaged cord or plug, after the heater

malfunctions, has been dropped or damaged in any manner. Re turn the
heater to a n authorised service facility for examination and repair.

6. Do not use outdoors. It is not intended for use in wet or damp locations.
Never locate heater where it may fall into a bathtub or other water container.

7. Do not run cord under carpeting. Do not cover cord with rugs or

runners. Arrange cord away from an are a where it may be tripped
over. Do not use this heater with a programmer, timer or any other device that
switches the heater on automatically, since a fire risk exists if the heater is
covered or positioned incorrectly.

8. To disconnect heater, turn switches to the off position and remove plug from the

power socket. Pull only by the plug. Never pull on the cord.

9. Do not place the heater on soft surfaces. Always place on a flat level surface.

10. Do not use it in areas where p etro l, paint, or flammable liquids are used or

stored.

11. Do not let children play with the packaging, for example plastic bags.

12. Check household voltage to ensure it matches the rating plate specification.

13. Avoid the use of an extens ion cord as it could overheat and cause a fire.

14. This heater is filled with a precise quantity of special oil. Repairs requiring

t h e opening of the oil container are only to be made by the
manufacturer or a qualified service engineer, who should be contacted if
there is any leakage.

READ & SAVE THESE IMPORTAN T INSTRUCTIONS

BS PLUG WIRING

Wiring Instructions: Should it be necessary to change the plug please
note the wires in the mains lead are coloured in accordance with the
following code:

BLUE - NEUTRAL

BROWN - LIVE

GREEN AND YELLOW - EARTH

As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your plug,
proceed as follows:

1. The BLUE wire is the NEUTRAL and must be connected to the terminal
which is marked with the letter N or coloured BLACK.

2. The BROWN wire is the LIVE and must be connected to the terminal
which is marked with the letter L or coloured RED.

3. The GREEN/YELLOW is the EARTH and must be connected to the
terminal which is marked with the letter E or or coloured GREEN OR
GREEN/YELLOW.

4. Always ensure that the cord grip is positioned and fastened correctly.

If a 13A (BS 1363) fused plug is used it must be fitted with a 13A fuse. If in
doubt consult a qualified electrician.

Wiring for a 13 Amp Plug (BS1363)

Please note. The Earth Terminal is marked with the letter E or Earth Symbol