PR Elecronics 5714 User Manual

5714

Programmable
LED Indicator

No. 5714V103-UK
From serial number:
121496001 (A+B)
131077001 (C+D)

1651

PR electronics A/S tilbyder et bredt program af analoge og digitale
signalbehandlingsmoduler til industriel automation. Programmet
består af Isolatorer, Displays, Ex-barrierer, Temperaturtransmittere,
Universaltransmittere mfl. Vi har modulerne, du kan stole på i selv
barske miljøer med elektrisk støj, vibrationer og temperaturudsving,
og alle produkter opfylder de strengeste internationale standarder.
Vores motto »Signals the Best« er indbegrebet af denne filosofi – og
din garanti for kvalitet.

PR electronics A/S oers a wide range of analog and digital
signal conditioning devices for industrial automation. The product
range includes Isolators, Displays, Ex Interfaces, Temperature
Transmitters, and Universal Devices. You can trust our products in
the most extreme environments with electrical noise, vibrations and
temperature fluctuations, and all products comply with the most
exacting international standards. »Signals the Best« is the epitome
of our philosophy – and your guarantee for quality.

PR electronics A/S ore une large gamme de produits pour le
traite ment des signaux analogiques et numériques dans tous
les domaines industriels. La gamme de produits s’étend des
transmetteurs de température aux acheurs, des isolateurs aux
interfaces SI, jusqu’aux modules universels. Vous pouvez compter
sur nos produits même dans les conditions d’utilisation sévères,
p.ex. bruit électrique, vibrations et fluctuations de température.
Tous nos produits sont conformes aux normes internationales les
plus strictes. Notre devise »SIGNALS the BEST« c’est notre ligne
de conduite - et pour vous l’assurance de la meilleure qualité.

PR electronics A/S verfügt über ein breites Produktprogramm
an analogen und digitalen Signalverarbeitungsgeräte für die in­dustrielle Automatisierung. Dieses Programm umfasst Displays,
Temperaturtransmitter, Ex- und galvanische Signaltrenner, und
Universalgeräte. Sie können unsere Geräte auch unter extremen
Einsatzbedingungen wie elektrisches Rauschen, Erschütterungen
und Temperaturschwingungen vertrauen, und alle Produkte von
PR electronics werden in Überein stimmung mit den strengsten
internationalen Normen produziert. »Signals the Best« ist Ihre
Garantie für Qualität!

DK

UK

FR

DE

5714V103-UK 1

PROGRAMMABLE LED INDICATOR

PREVIEW 5714

TABLE OF CONTENTS

Warning ....................................................................................................... 2

Symbol identification ............................................................................ 2

Safety instructions ................................................................................. 3

Front and back layout ........................................................................... 5

Application ................................................................................................. 6

Technical characteristics ...................................................................... 6

Mounting .................................................................................................... 6

Applications............................................................................................... 7

Order: 5714 ............................................................................................... 8

Electrical specifications........................................................................ 8

Sensor error detection /

sensor error detection outside range ......................................... 12

Connections .............................................................................................. 14

Block diagram ........................................................................................... 15

Routing diagram ...................................................................................... 17

Scrolling help text .................................................................................. 18

Configuration / operating the function keys ............................... 20

Graphic depiction of the relay function setpoint....................... 21

2 5714V103-UK

SYMBOL IDENTIFICATION

Triangle with an exclamation mark: Warning / demand. Potentially

lethal situations.

The CE mark proves the compliance of the device with the essen­tial requirements of the directives.

WARNING

This device is designed for connection to hazardous electric vol­tages. Ignoring this warning can result in severe personal injury
or mechanical damage. To avoid the risk of electric shock and fire,
the safety instructions of this manual must be observed and the
guidelines followed. The specifications must not be exceeded,
and the device must only be applied as described in the follo­wing. Prior to the commissioning of the device, this manual must
be examined carefully. Only qualified personnel (technicians)
should install this device.
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be
impaired.

WARNING

Until the device is fixed, do not connect hazardous voltages to
the device.
The following operations should only be carried out on a discon­nected device and under ESD safe conditions:
Troubleshooting the device.

Repair of the device must be done by PR electronics A/S only.

GENERAL

HAZARD -

OUS

VOLTAGE

5714V103-UK 3

SAFETY INSTRUCTIONS

DEFINITIONS:

Hazardous voltages have been defined as the ranges: 75 to 1500 Volt DC, and 50
to 1000 Volt AC.
Technicians are qualified persons educated or trained to mount, operate, and also
troubleshoot technically correct and in accordance with safety regulations.
Operators, being familiar with the contents of this manual, adjust and operate the
knobs or potentiometers during normal operation.

RECEIPT AND UNPACKING:

Unpack the device without damaging it. The packing should always follow the
device until this has been permanently mounted. Check at the receipt of the
device whether the type corresponds to the one ordered.

ENVIRONMENT:

Avoid direct sunlight, dust, high temperatures, mechanical vibrations and shock,
as well as rain and heavy moisture. If necessary, heating in excess of the stated
limits for ambient temperatures should be avoided by way of ventilation.
All devices fall under Installation Category II, Pollution Degree 1, and Insulation
Class II.

MOUNTING:

Only technicians who are familiar with the technical terms, warnings, and instruc­tions in the manual and who are able to follow these should connect the device.
Should there be any doubt as to the correct handling of the device, please con­tact your local distributor or, alternatively,

PR electronics A/S

www.prelectronics.com.

Mounting and connection of the device should comply with national legislation
for mounting of electric materials, i.a. wire cross section, protective fuse, and
location. Descriptions of Input / Output and supply connections are shown in the
block diagram and side label.

4 5714V103-UK

The following apply to fixed hazardous voltages-connected devices:

The max. size of the protective fuse is 10 A and, together with a power
switch, it should be easily accessible and close to the device. The power
switch should be marked with a label telling it will switch off the vol­tage to the device.

UL INSTALLATION REQUIREMENTS:

For use on a flat surface of a type 1 enclosure
Use 60/75°C copper conducters only

Enclosure rating (face only)........................... Type 4X, UL50E

Max. ambient temperature ............................ 60°C

Max. wire size, pins 41...46 ........................... AWG 30-16

Max. wire size, others ...................................... AWG 30-12

UL file number .................................................... E248256

CALIBRATION AND ADJUSTMENT:

During calibration and adjustment, the measuring and connection of external
voltages must be carried out according to the specifications of this manual. The
technician must use tools and instruments that are safe to use.

NORMAL OPERATION:

Operators are only allowed to adjust and operate devices that are safely fixed in
panels, etc., thus avoiding the danger of personal injury and damage. This means
there is no electrical shock hazard, and the device is easily accessible.

CLEANING:

When disconnected, the device may be cleaned with a cloth moistened with
distilled water.

LIABILITY:

To the extent the instructions in this manual are not strictly observed, the
custom er cannot advance a demand against PR electronics A/S that would other­wise exist according to the concluded sales agreement.

5714V103-UK 5

FRONT AND BACK LAYOUT

Picture 1: Front of PReview 5714.

Picture 2: Back of PReview 5714.

6 5714V103-UK

PROGRAMMABLE LED INDICATOR

PREVIEW 5714

• 4-digit 14-segment LED indicator

• Input for mA, V, potentiometer, Ohm, RTD and TC

• 2 relays and analogue output

• Universal voltage supply

• Front key programmable

Application

• Display for digital readout of current, voltage, resistance, temperature or
potentiometer signals.

• Process control with 2 pairs of potential-free relays and / or analogue output.

• For local readout in extremely wet atmospheres with a specially designed
splash-proof cover.

Technical characteristics

• 4-digit LED indicator with 13.8 mm 14-segment characters. Max. display read­out -1999...9999 with programmable decimal point, relay ON / OFF indication.

• All operational parameters can be adjusted to any application by use of the
front keys.

• PReview 5714 is available fully-configured acc. to specifications ready for
process control and visualisation.

• Help texts in eight languages can be selected via a menu item.

• In versions with relay outputs the user can minimise the installation test time
by activating / deactivating each relay independently of the input signal.

Mounting

• To be mounted in front panel. The included rubber packing must be mounted
between the panel cutout hole and the display front to obtain a protection
degree of IP65 (type 4X). For extra protection in extreme environments,
PReview 5714 can be delivered with a speially designed splash-proof cover as
accessory.

12

11

26

25

24

23

22

21

1 2

32

31

1 2

46

45

44

43

42

41

4 3 2

TC

1 2

-

+

-

+

-

+

-

+

-

+

5714V103-UK 7

APPLICATIONS

Input signals:

Current

Poten-

tio meter

Output signals:

2 change over relays

Analogue, 0/4...20 mA

Supply:

21.6...253 VAC
or

19.2...300 VDC

Voltage

RTD & Lin R -

connection, wires

2-wire transmitter

8 5714V103-UK

NB! Please order the splash-proof cover seperately. Order No. 8335.

Electrical specifications

Specifications range:

-20°C to +60°C

Common specifications:

Supply voltage, universal ..................................... 21.6...253 VAC, 50...60 Hz or

19.2...300 VDC

Consumption

Isolation voltage, test / operation ................... 2.3 kVAC / 250 VAC

Signal- / noise ratio ................................................ Min. 60 dB (0...100 kHz)

Response time (0...90 %, 100...10 %), programmable:

Temperature input .......................................... 1...60 s

Current / voltage input ................................. 0.4...60 s

Calibration temperature ....................................... 20...28°C

Accuracy, the greater of general and basic values:

General values

Input type

Absolute

accuracy

Temperature

coefficient

All ≤ ±0.1% of reading ≤ ±0.01% of reading / °C

Type Internal consumption Max. consumption

5714A 2.2 W 2.5 W

5714B/C 2.7 W 3.0 W

5714D 3.2 W 3.5W

Type Version

5714 Standard.......................: A

2 relays........................: B

Analogue output ...............: C

Analogue output and 2 relys....: D

Order: 5714

5714V103-UK 9

Auxiliary supply:

2 wire supply, pin 46...45 ............................. 25...15 VDC / 0...20 mA

Vibration ...................................................................... IEC 60068-2-6 Test FC

2...13.2 Hz ........................................................... ±1 mm

13.2...100 Hz ..................................................... ±0.7 g

Wire size, pin 41...46 max. .................................. 1 x 1.5 mm

2

stranded wire

Wire size, others max. ........................................... 1 x 2.5 mm

2

stranded wire

Relative humidity..................................................... < 95% RH (non cond.)

Dimensions (HxWxD) .............................................. 48 x 96 x 120 mm

Cutout dimensions .................................................. 44.5 x 91.5 mm

Protection degree (mounted in panel) ............ IP65 / Type 4X, UL50E

Weight .......................................................................... 230 g

RTD, linear resistance and potentiometer input:

Basic values

Input

type

Basic

accuracy

Temperature

coefficient

mA ≤ ±4 µA ≤ ±0.4 µA / °C

Volt ≤ ±20 µV ≤ ±2 µV / °C

Pt100 ≤ ±0.2°C ≤ ±0.01°C / °C

Linear resistance ≤ ±0.1 Ω ≤ ±0.01 Ω / °C

Potentiometer ≤ ±0.1 Ω ≤ ±0.01 Ω / °C

TC type:

E, J, K, L, N, T, U

≤ ±1°C

≤ ±0.05°C / °C

TC type: R, S, W3,

W5, LR

≤ ±2°C

≤ ±0.2°C / °C

TC type: B

85...200°C

≤ ±4°C

≤ ±0.4°C / °C

TC type: B

200...1820°C

≤ ±2°C

≤ ±0.2°C / °C

Input

type

Min.

value

Max.

value

Standard

Pt10...Pt1000

Ni50...Ni1000

Cu10...Cu100

Lin. R

Potentiometer

-200°C

-60°C

-200°C
0 Ω

10 Ω

+850°C
+250°C
+260°C

10000 Ω

100 kΩ

IEC 60751

DIN 43760

α = 0.00427

-

-

EMC immunity influence .................................... < ±0.5% of readout

10 5714V103-UK

Input for RTD types:
Pt10, Pt20, Pt50, Pt100, Pt200, PT250, Pt300, Pt400, Pt500, Pt1000
Ni50, Ni100, Ni120, Ni1000, Cu10, Cu20, Cu50, Cu100

Cable resistance pr. wire, RTD (max.) .............. 50 Ω

Sensor current, RTD ................................................ Nom. 0.2 mA

Effect of sensor cable resistance

(3- / 4-wire), RTD ..................................................... < 0.002 Ω / Ω

Sensor error detection, RTD ................................ Yes

Short curcuit detection, RTD ............................... < 15 Ω

TC input:

Cold junction compensation (CJC)

via internal sensor ........................................... ±(2.0°C + 0.4°C * Δt)

Δt = internal temperature - ambient temperature

Sensor error detection, all TC types................. Yes

Sensor error detection ........................................... Yes

Sensor error current:

when detecting ................................................. Nom. 2 μA

else ......................................................................... 0 μA

Current input:

Measurement range ................................................ 0...20 mA

Programmable measurement ranges ............... 0...20 and 4...20 mA

Input resistance........................................................ Nom. 20 Ω + PTC 25 Ω

Sensor error detection:

loop break 4...20 mA ....................................... Yes

Type

Min.

value

Max.

value

Standard

B
E

J

K

L
N
R
S
T
U

W3
W5

LR

0°C

-100°C

-100°C

-180°C

-200°C

-180°C

-50°C

-50°C

-200°C

-200°C
0°C
0°C

-200°C

+1820°C
+1000°C
+1200°C
+1372°C

+900°C
+1300°C
+1760°C
+1760°C

+400°C

+600°C
+2300°C
+2300°C

+800°C

IEC 60584-1
IEC 60584-1
IEC 60584-1
IEC 60584-1

DIN 43710
IEC 60584-1
IEC 60584-1
IEC 60584-1
IEC 60584-1

DIN 43710

ASTM E988-90
ASTM E988-90
GOST 3044-84

5714V103-UK 11

Voltage input:

Measurement range ................................................ 0...12 VDC

Programmable measurement ranges ............... 0...1 / 0.2...1 /

0...10 / 2...10 VDC

Input resistance........................................................ Nom. 10 MΩ

Outputs:
Display:

Display readout......................................................... -1999...9999 (4 digits)

Decimal point ............................................................. Programmable

Digit height ................................................................ 13.8 mm

Display updating ...................................................... 2.2 times / s

Input outside input range is

indicated by................................................................ Explanatory text

Current output:

Signal range (span) ................................................. 0...20 mA

Programmable signal ranges ............................... 0...20 / 4...20 /

20...0 / 20...4 mA

Load (max.) ................................................................. 20 mA / 800 Ω / 16 VDC

Load stability ............................................................. ≤ 0.01% of span / 100 Ω

Sensor error detection ........................................... 0 / 3.5 / 23 mA / none &

NAMUR NE 43 up / downscale ........................... 23 mA / 3.5 mA

Output limitation:

on 4...20 and 20...4 mA signals .................. 3,8...20.5 mA

on 0...20 and 20...0 mA signals .................. 0...20.5 mA

Current limit ............................................................... ≤ 28 mA

Relay outputs:

Relay function ........................................................... Setpoint

Hysteresis ................................................................... 0...100%

On and Off delay ...................................................... 0...3600 s

Sensor error detection ........................................... Make / Break / Hold

Max. voltage .............................................................. 250 VRMS

Max. current ............................................................... 2 A / AC

Max. AC power .......................................................... 500 VA

Max. current at 24 VDC ......................................... 1 A

Marine approval:

Det Norske Veritas, Ships & Offshore ............. Standard for Certification No. 2.4

Observed authority requirements: Standard:

EMC 2004/108/EC .................................................. EN 61326-1

LVD 2006/95/EC ...................................................... EN 61010-1

UL, Standard for Safety ......................................... UL 508

EAC TR-CU 020/2011 ............................................ EN 61326-1

12 5714V103-UK

Sensor error detection / sensor error detection outside range

Sensor error check in 5714 variants

Variant: Configuration Sensor error detection:

5714A Always: ON

5714B

ERR1=NONE, ERR2=NONE: OFF

else: ON

5714C

O.ERR=NONE: OFF

else: ON

5714D

ERR1=NONE, ERR2=NONE, O.ERR=NONE: OFF

else: ON

Outside range readout (IN.LO, IN.HI):

If the valid range of the A/D converter or the polynomial is exceeded

Input Range Readout Limit

VOLT

0...1 V / 0,2...1 V

IN.LO < -25 mV

IN.HI > 1,2 V

0...10 V / 2...10 V

IN.LO < -25 mV

IN.HI > 12 V

CURR 0...20 mA / 4...20 mA

IN.LO < -1,05 mA

IN.HI > 25,05 mA

POTM -

IN.LO < -0,5%

IN.HI > 100,5%

TEMP TC / RTD

IN.LO < temperature range -2°C

IN.HI > temperature range +2°C

LIN R

0...800 ohm

IN.LO < 0 ohm

IN.HI > 1 kohm

0...10 kohm

IN.LO < 0 ohm

IN.HI > 15 kohm

Sensor error detection (SE.BR, SE.SH):

Input Range Readout Limit

CURR Loop break (4..20mA) SE.BR <= 3,6 mA; > = 21 mA

TEMP

TC SE.BR > ca. 750 kohm / (1,25 V)

RTD, 2-, 3- & 4-wire

No SE.SH for Cuxx, Pt10, Pt20 & Pt50

SE.BR > 12 kohm
SE.SH < 15 ohm

LIN R

0...800 ohm SE.BR > 875 ohm

0...10 kohm SE.BR > 12 kohm

Display readout below min. / above max. (-1.9.9.9, 9.9.9.9):

Input Range Readout Limit

CURR

VOLT

All

-1.9.9.9 Display readout <-1999

9.9.9.9 Display readout >9999

LIN R All

-1.9.9.9 Display readout <-1999

9.9.9.9 Display readout >9999

POTM -

-1.9.9.9 Display readout <-1999

9.9.9.9 Display readout >9999

5714V103-UK 13

Readout at hardware error

Error search Readout Error cause
Test of internal communication uC / ADC HW.ER Permanent error in ADC
Test of internal CJC sensor CJ.ER CJC sensor defect
Check-sum test of the configuration in RAM RA.ER Error in RAM
Check-sum test of the configuration in EEPROM EE.ER Error in EEPROM

! Error indications in the display blink once a second. The help text explains the error.

Tx

31 32

41 42 43 44 45 4641 42 43 44 45 4641 42 43 44 45 46

41 42 43 44 45 46 41 42 43 44 45 46 41 42 43 44 45 46

41 42 43 44 45 46 41 42 43 44 45 46

mA

11 12

R2

R1

21 22 23 24 25 26

- +

- +- + - +

- +

14 5714V103-UK

CONNECTIONS

RTD & Lin R, 2-wire RTD & Lin R, 3-wire RTD & Lin R, 4-wire

PotentiometerVoltage

TC 2-wire transmitter Current

Current Relays

Inputs:

Output:

Supply:

I+

11

12

31

32

CPU

AD

EEPROM

PTC

20 Ω

5714

1 2 3 4

46

45

44

43

42

41

+V

4 3 2

2122232425

26

R1

R2

1

3

2

Tx

+

+

+

mA

5714V103-UK 15

BLOCK DIAGRAM

I

Output

Common

Relay 1 N.O.

Relay 1 N.C.

Common

Relay 2 N.O.

Relay 2 N.C.

Supply

Supply

21.6...253 VACor19.2...300 VDC

Version D

Int.

CJC

2-wire supply

> 15 VDC

Input +,

mA

Input gnd.

RTD & Lin R,

wires

Potm.

Power up

50.0

3

F.SET

REL1
REL2

3

1.0

1.2

1 2

1 2

SETP

-1999
9999

/OFF

3

1 2

DI.LO PERC

DI.HI

1.1

0000
9999

1 2

3

CURR

3

RANG

0-20 4-20

1 2

VOLT

3

RANG

1 2

0-1 0.2-1

0-10 2-10

IN

1 2

DEC.P

1111

1.1.1.1

1 2

POTM

TEMP

TYPE

PASS

3

a999
9999

1 2

3

a999
9999

1 2

3

PERC
DISP

1 2

3

1.3

DEC.P

1111

111.1

1 2

UNIT

'C
'F

1 2

ADV

NO

YES

1 2

3

3

LIN.R

3

LR.LO

0-9998

1 2

LR.HI

1-9999

1 2

CONN

1 2

2W 3W 4W

3

3

3

CU.TY CONN

CU

3

1 2 1 2

10-100

2W 3W 4W

3

3

1 2

3

3

3

3

3

1.4

1.4

1.6

ADV.SET

YES

PT.TY

TC

CONN

TC.TY

PT

3

1 2 1 2

NI

NI.TY CONN

50-1000

1 2

2W 3W 4W

1 2

1 2

3

3

3

TC.B-E-J-K-L-N-R

S-T-U-W3-W5-LR

10-1000

2W 3W 4W

3

3

3

3

16 5714V103-UK

1.0 = Default state

1.1 = Only if password­protected

1.2 = Only is FastSet is enabled

1.3 = FastSet and relay test disab­led at password 5000...9999.

1.4 = No relay outputs

1.5 = Not valid for these input
signals: Potentiometer, 0...20
mA and voltage

1.6 = No analogue output

1.7 = Only if input signal is
temperature

1.8 = In default state press and
hold

1 or 2 to change

display intensity between
damped and full
(7 = full intensity).

Fast setpoint adjustment

and relay test

1 Increase setpoint
2 Decrease setpoint
3 Save and exit the menu
1 and 2 simultaneously = change relay state

REL.1

SET

SKIP

OFF

1 2

3

SETP

0.0

100.0

1 2

3

ACT1

INCR
DECR

1 2

3

HYS1

0.0

100.0

1 2

3

ERR1

HOLD
ACTI
DEAC
NONE

1 2

3

ON.DE

0000
3600

1 2

3

OF.DE

0000
3600

1 2

3

3

1.5

REL.2

SET

SKIP

OFF

1 2

3

SETP

0.0

100.0

1 2

3

ACT2

INCR
DECR

1 2

3

HYS2

0.0

100.0

1 2

3

ERR2

HOLD
ACTI
DEAC
NONE

1 2

3

ON.DE

0000
3600

1 2

3

OF.DE

0000
3600

1 2

3

3

1.5

A.OUT

4-20
0-20
20-4
20-0

1 2

3

O.LO

a999
9999

1 2

3

O.HI

a999
9999

1 2

3

O.ERR

0/3.5mA

23mA
NONE

1 2

3

RESP

0.0

60.0

1 2

3

E.PAS

YES

NO

1 2

3

N.PAS

0000
9999

1 2

3

NO

----

1.51.7 1.7

1.6

1.6

DE DK
ES FR
IT SE
UK CZ

1.4

ADV.SET

LANG

DISP

CAL

1.8

7

LIGH

3

1...7

1 2

LANG

DISP

CAL

1 2

3

3

UK

HLP.T

1 2

3

YES

CA.LO

3

YES NO

1 2

2.0

VAL.L

3

100.0

0.0

1 2

NO

3

YES

CA.HI

3

1 2

90.0

VAL.H

3

100.0

0.0

1 2

NO

YES

USE.C

3

1 2

YES NO

YES NO

5714V103-UK 17

ROUTING DIAGRAM

If no keys are activated for 2 minutes the display returns to default state

1.0 without saving configuration changes..

1 Increase value / choose next parameter
2 Decrease value / choose previous parameter
3 Accept the chosen parameter and go to the next menu

Hold 3 Back to previous menu / return to menu 1.0 without saving

To default state 1.0

18 5714V103-UK

SCROLLING HELP TEXT

Display in default state xxxx, hardware error:
SE.BR --> SENSOR WIRE BREAKAGE
SE.SH --> SENSOR SHORT CIRCUIT
IN.HI --> INPUT OVERRANGE
IN.LO --> INPUT UNDERRANGE

9.9.9.9 --> DISPLAY OVERRANGE

-1.9.9.9 --> DISPLAY UNDERRANGE
HW.ER --> HARDWARE ERROR
EE.ER --> EEPROM ERROR -

CHECK CONFIGURATION

RA.ER --> RAM MEMORY ERROR
CJ.ER --> CJC SENSOR ERROR

Fastset (Enabled):
F.SET
REL1 --> FAST SET MENU -
REL2 --> SELECT RELAY

SETP

xxxx --> RELAY SETPOINT - PRESS OK TO SAVE

Fastset (Disabled):
SETP

xxxx --> RELAY SETPOINT - READ ONLY

Configuration menus:
ADV

YES --> ENTER ADVANCED SETUP MENU?
NO

PASS
xxxx --> SET CORRECT PASSWORD

IN
C.LIN* --> TEXT ENTERED BY USER IN PRESET
CURR --> CURRENT INPUT
VOLT --> VOLTAGE INPUT
POTM --> POTENTIOMETER INPUT
LIN.R --> LINEAR RESISTANCE INPUT
TEMP --> TEMPERATURE SENSOR INPUT

RANG When current selected:

0-20 --> INPUT RANGE IN mA
4-20 --> INPUT RANGE IN mA

RANG When voltage selected:

0-10 --> INPUT RANGE IN VOLT
2-10 --> INPUT RANGE IN VOLT

0.0-1 --> INPUT RANGE IN VOLT

0.2-1 --> INPUT RANGE IN VOLT

DEC.P
1111 --> DECIMAL POINT POSITION

111.1 --> DECIMAL POINT POSITION

11.11 --> DECIMAL POINT POSITION

1.111 --> DECIMAL POINT POSITION

LR.LO
xxxx --> SET RESISTANCE VALUE LOW

LR.HI
xxxx --> SET RESISTANCE VALUE HIGH

DI.LO
xxxx --> DISPLAY READOUT LOW

DI.HI
xxxx --> DISPLAY READOUT HIGH

REL.U
PERC --> SET RELAY IN PERCENTAGE
DISP --> SET RELAY IN DISPLAY UNITS

TYPE
CU --> SELECT CU SENSOR TYPE
PT --> SELECT PT SENSOR TYPE
NI --> SELECT NI SENSOR TYPE
TC --> SELECT TC SENSOR TYPE

CU.TY
10 --> SELECT CU SENSOR TYPE
20 --> SELECT CU SENSOR TYPE
50 --> SELECT CU SENSOR TYPE
100 --> SELECT CU SENSOR TYPE

PT.TY
10 --> SELECT PT SENSOR TYPE
20 --> SELECT PT SENSOR TYPE
50 --> SELECT PT SENSOR TYPE
100 --> SELECT PT SENSOR TYPE
200 --> SELECT PT SENSOR TYPE
250 --> SELECT PT SENSOR TYPE
300 --> SELECT PT SENSOR TYPE
400 --> SELECT PT SENSOR TYPE
500 --> SELECT PT SENSOR TYPE
1000 --> SELECT PT SENSOR TYPE

NI.TY
50 --> SELECT NI SENSOR TYPE
100 --> SELECT NI SENSOR TYPE
120 --> SELECT NI SENSOR TYPE
1000 --> SELECT NI SENSOR TYPE

CONN When Cu, Pt and Ni sensor is selected
2W --> SELECT 2-WIRE SENSOR CONNECTION
3W --> SELECT 3-WIRE SENSOR CONNECTION
4W --> SELECT 4-WIRE SENSOR CONNECTION

TC.TY
TC. B --> SELECT TC SENSOR TYPE
TC. E --> SELECT TC SENSOR TYPE
TC. J --> SELECT TC SENSOR TYPE
TC. K --> SELECT TC SENSOR TYPE
TC. L --> SELECT TC SENSOR TYPE
TC. N --> SELECT TC SENSOR TYPE
TC. R --> SELECT TC SENSOR TYPE
TC. S --> SELECT TC SENSOR TYPE
TC. T --> SELECT TC SENSOR TYPE
TC. U --> SELECT TC SENSOR TYPE
TC.W3 --> SELECT TC SENSOR TYPE
TC.W5 --> SELECT TC SENSOR TYPE
TC.LR --> SELECT TC SENSOR TYPE

DEC.P When temperature selected
1111 --> DECIMAL POINT POSITION

111.1 --> DECIMAL POINT POSITION

UNIT
°C --> DISPLAY AND RELAY SETUP IN CELSIUS
°F --> DISPLAY AND RELAY SETUP IN
FAHRENHEIT

5714V103-UK 19

REL1
SET --> ENTER RELAY 1 SETUP
SKIP --> SKIP RELAY 1 SETUP
OFF --> RELAY 1 DISABLED

SETP
xxxx --> RELAY SETPOINT

ACT1
INCR --> ACTIVATE AT INCREASING SIGNAL
DECR --> ACTIVATE AT DECREASING SIGNALL

HYS1
xxxx --> RELAY HYSTERESIS

ERR1
HOLD --> HOLD RELAY AT ERROR
ACTI --> ACTIVATE RELAY AT ERROR
DEAC --> DEACTIVATE RELAY AT ERROR
NONE --> UNDEFINED STATUS AT ERROR

ON.DE
xxxx --> RELAY ON-DELAY IN SECONDS

OF.DE
xxxx --> RELAY OFF-DELAY IN SECONDS

REL2
SET --> ENTER RELAY 2 SETUP
SKIP --> SKIP RELAY 2 SETUP
OFF --> RELAY 2 DISABLED

SETP
xxxx --> RELAY SETPOINT

ACT2
INCR --> ACTIVATE AT INCREASING SIGNAL
DECR --> ACTIVATE AT DECREASING SIGNAL

HYS2
xxxx --> RELAY HYSTERESIS

ERR2
HOLD --> HOLD RELAY AT ERROR
ACTI --> ACTIVATE RELAY AT ERROR
DEAC --> DEACTIVATE RELAY AT ERROR
NONE --> UNDEFINED STATUS AT ERROR

ON.DE
xxxx --> RELAY ON-DELAY IN SECONDS

OF.DE
xxxx --> RELAY OFF-DELAY IN SECONDS

A.OUT
0-20 --> OUTPUT RANGE IN mA
4-20 --> OUTPUT RANGE IN mA
20-0 --> OUTPUT RANGE IN mA
20-4 --> OUTPUT RANGE IN mA

O.LO
xxxx --> DISPLAY VALUE FOR OUTPUT LOW

O.HI
xxxx --> DISPLAY VALUE FOR OUTPUT HIGH

O.ERR
23 mA --> NAMUR NE43 UPSCALE AT ERROR
3,5 mA --> NAMUR NE43 DOWNSCALE AT ERROR
0mA --> DOWNSCALE AT ERROR
NONE --> UNDEFINED OUTPUT AT ERROR

RESP
xxx.x --> ANALOGUE OUTPUT RESPONSE TIME
IN SECONDS

E.PAS
NO --> ENABLE PASSWORD PROTECTION
YES

N.PAS
xxxx --> SELECT NEW PASSWORD

ADV MENU:
LANG --> ENTER LANGUAGE SETUP
DISP --> ENTER DISPLAY SETUP
CAL --> PERFORM PROCESS CALIBRATION

HLP.T
DE --> DE - WAEHLE DEUTSCHEN HILFETEXT
DK --> DK - VAELG DANSK HJAELPETEKST
ES --> ES - SELECCIONAR TEXTO DE
AYUDA EN ESPANOL
FR --> FR - SELECTION TEXTE D’AIDE
EN FRANCAIS
IT --> IT - SELEZIONARE TESTI DI
AIUTO ITALIANI
SE --> SE - VALJ SVENSK HJALPTEXT
UK --> UK - SELECT ENGLISH HELPTEXT
CZ --> CZ - VYBER CESKOU NAPOVEDU

LIGH

xxxx --> ADJUST DISPLAY LIGHT INTENSITY

CA.LO
YES --> CALIBRATE INPUT LOW TO PROCESS
VALUE?
NO

CA.HI
YES --> CALIBRATE INPUT HIGH TO PROCESS
VALUE?
NO

VAL.L
xxxx --> SET VALUE FOR LOW CALIBRATION
POINT

VAL.H
xxxx --> SET VALUE FOR HIGH CALIBRATION
POINT

USE.C
YES --> USE PROCESS CALIBRATED VALUES?
NO

20 5714V103-UK

CONFIGURATION / OPERATING THE

FUNCTION KEYS

Documentation for routing diagram.

In general:

When configuring the display you are guided through all parameters, you can

choose the settings which fit the application. For each menu there is a scrol­ling help text which is automatically shown in the display, this starts after 5
seconds if no key has been activated.

Configuration is carried out by using the 3 function keys.

1 will increase the numerical value or choose the next parameter.
2  will decrease the numerical value or choose the previous parameter.
3 will accept the chosen value and end the menu.

If a function does not exist in the display all parameters are skipped to make the

configuration as simple as possible.
Once the configuration has been entered the display will show “----”.
Pressing and holding

3 will return to the previous menu or return to the default

state (1.0) without saving the changed values or parameters.
If no key is activated for 2 minutes, the display will return to the default state

(1.0) without saving the changed values or parameters.

Further explanations:

Fast setpoint adjustment and relay test: These menus allow you to change the

set point quickly and to check the operation of the relays.
Pressing

1 and 2 at the same time will change the state of the relay – this change

is indicated by the diodes on the display. Pressing

3 will save the set point

change.
Holding down

3 for more than 0.5 seconds will return the unit to the default sta-

te without changing the set point.

Password protection:

Using a password will stop access to the menu and parameters. There are two

levels of password protection. Passwords between 0000…4999 allow access to

the fast set point adjustment and relay test. (Using this password stops access

to all other parts of the menu). Passwords between 5000…9999 stop access

to all parts of the menu, fast set point and relay test. (Current set point is still

shown). By using the master password 2008, all configuration menus are avai-

lable.

100

90

80

70

60

50

40

30

20

10

0 10 20 30 40 50 60 70 80 90 100

t

O N.O. O N.O.On N.O.

On N.C. On N.C.

O N.C.

100

90

80

70

60

50

40

30

20

10

0 10 20 30 40 50 60 70 80 90 100

t

O N.O. O N.O.On N.O.

On N.C. On N.C.

O N.C.

5714V103-UK 21

Graphic depiction of the relay function setpoint

Relay unitsRelay units

Setpoint = 50

Hysteresis = 10

Hysteresis = 10

Setpoint = 50

Relay action: Increasing Relay action: Decreasing

Programmable displays with a wide selection of
inputs and outputs for display of temperature, volume and weight,
etc. Feature linearization, scaling, and dierence measurement
functions for programming via PReset software.

Displays

A wide selection of transmitters for DIN form
B mounting and DIN rail devices with analog and digital bus
communication ranging from application-specific to universal
transmitters.

Temperature

Galvanic isolators for analog and digital signals
as well as HART

®

signals. A wide product range with both loop­powered and universal isolators featuring linearization, inversion,
and scaling of output signals.

Isolation

Interfaces for analog and digital signals as well

as HART

®

signals between sensors / I/P converters / frequency
signals and control systems in Ex zone 0, 1 & 2 and for some
devices in zone 20, 21 & 22.

Ex interfaces

PC or front programmable devices with
universal options for input, output and supply. This range oers
a number of advanced features such as process calibration,
linearization and auto-diagnosis.

Universal

Head oce

Denmark www.prelectronics.com

PR electronics A/S [e-mail]
Lerbakken 10 tel. [phone]
DK-8410 Rønde fax [phone]

 www.prelectronics.fr
 [e-mail]

 www.prelectronics.de
 [e-mail]

 www.prelectronics.es
 [e-mail]

 www.prelectronics.it
 [e-mail]

 www.prelectronics.se
 [e-mail]

 www.prelectronics.com
 [e-mail]

 www.prelectronics.com
 [e-mail]

 www.prelectronics.cn
 [e-mail]

 www.prelectronics.be
 [e-mail]