Precor C842 User Manual

C846

i

C842

Owner’s Manual Addendum

This addendum accompanies the
and describes the changes that have occurred with the introduction
of the C846i product.

On the C846i, new labels appear on the display, but do not change
the functionality of the unit. The owner’s m anual uses the words
course and course selection, while the labels display programs and
program selection. To lessen confusion, please remember that
wherever you come across the word “course” in the owner’s
manual, you need to replace it with the word “program.”

OPTIONAL POWER ADAPTER

With the C842 or C846i product, if you choose to purchase the
optional power adapter, you must also purchase the internal cable
kit. This kit supplies a cable, bracket and fasteners that allow the
power adapter to connect to the lower electronics board.

CAUTION: The internal cable kit requires installation by an
authorized service person. Do not attempt installation on
your own as you could void the Precor limited warranty.

C842 or C846 Owner’s Manual

If you need assistance, please see
owner’s manual.

Diagram 1

Loosen nut to
adjust seat tilt.

Seat
Nut

Wrench

Seat Post

SEAT ADJUSTMENT

On the C846i and C842, you can adjust the seat tilt by taking the
following steps:

Obtaining Service

in your

1. Loosen the nut beneath the seat using a 17 mm (¹¹⁄₁₆-inch)
box-end wrench or crescent wrench. Refer to Diagram 1.

P/N 47563-101

February 27, 2004

Diagram 2

Tilt the seat
forward or
backward.

Seat adjustment

Nut
Seat Post

2. Adjust the seat’s tilt (forward or back). See Diagram 2.

3. Wrench tighten the nut.

4. Apply pressure to the seat to make sure that it doesn’t move.

Readjust and retighten the nut, if necessary.