Precision Power A.10, A.15, A.12 User Manual
A
M
P
1 Art Subwoofer Wired to 4Ω 1 Art Subwoofer Wired to 1Ω
A
M
P
A
M
P
A
M
P
2 Art Subwoofers Wired to 2Ω
2 Art Subwoofers Wired to .5Ω
2010 Art Series
Subwoofers
A.10 A . 1 2 A . 1 5
A
M
P
3 Art Subwoofers Wired to 1.33Ω
WWW.PRECISIONPOWER.COM
WWW.PRECISIONPOWER.COM
Thank you for choosing PrecisionPower
woofers. Designed and
engineered in the USA, this product combines innovative technology with the finest materials to consistently deliver
of the Art
PrecisionPower
™ performance, sound quality, reliability, and value. This
product reflects our commitment to offer you
Absolutely State
unparalleled performance and quality for years of dependable service and listening enjoyment.
Enclosure Dimensions
Included in this manual are a number of different enclosure suggestions. These are by no means the only enclosures to use, but they
provide a starting point to determine the correct enclosure for your
needs many factors must be addressed (amount of power, vehicle,
placement, crossovers, etc) Therefore, as always PrecisionPower
recommends that your subwoofer be installed by an authorized
PrecisionPower dealer.
Features, Parameters, & Dimensions
Pressed Paper Cone
Injection Molded Conical Dust Cap
ABS Gasket
4 Layer Voice Coil
Stitched Tinsel Leads
series wired A.10 A.12
Fs (Hz)
Qms
Vas (ft³)
Cms (mm/N)
Mms (g)
Rms (kg/s)
Xmax (mm)
Xmech (mm)
Piston Diameter (in)
Sd (in²)
Qes
Re (Ω)
Z (Ω)
BL (Tm)
Rms Power (watts)
Qts
NO (%)
1w/1m SPL (dB)
2.8V SPL (dB)
Voice Coil Diameter (in)
Impedance (Ω)
Aluminum Voice Coil Former
Conex Composite Spider
Butyl Rubber Surround
Vented Pole Piece
Compression Terminals
33.87 26.14
4.19 5.673
1.181 2.631
0.23 0.218
96 169.6
4.876 4.912
11.5 13.3
17.25 19.95
9.29 11.28
49.6 75.95
0.636 0.793
4 4
4 4
11.33 11.25
400 500
0.552 0.696
0.198 0.162
84.97 84.12
88.12 87.71
2” 2.5”
DVC 2Ω DVC 2Ω
A.15
21.61
5.545
6.715
0.209
259.1
6.347
13.3
19.95
12.56
124
0.671
4
4
14.48
600
0.599
0.277
86.44
89.58
2.5”
DVC 2Ω
Enclosure Construction
All enclosures should be made of .75” (3/4”) material only. When
possible, make the baffle 1.5” (1 ½) thick and add .75” (3/4”) to the
depth of the enclosure to compensate. All volumes INCLUDE vent/
port and subwoofer displacements. DO NOT change the volume
unless you plan on adding a substantial amount of bracing. For
added performance, applying a coat of fiberglass resin to the interior
walls will greatly improve sealing the enclosure. Adding a thin layer
of poly-fill will improve response by smoothing out reflections
within the enclosure.
Enclosure Recommendations
A.10 Sealed
Dimensions
3
Vol. (ft.
)
0.50 11x14x9 0.965 50.8 1.00 13x14.5x13 1.252 37.5
0.75 11x14x12.5 0.847 47.6 1.50 13x21.25x13 1.084 33.6
1.00 11x14x16.25 0.778 46.3
(H x L x D)
QTC -3dB (Hz) Vol. (ft.3)
Dimensions
3
Vol. (ft.
)
(H x L x D)
18x17.5x15
2.00
3.00
4.00
18x25x15
18x33x15
A.15 Sealed
QTC -3dB (Hz)
1.219 34.9
1.035 31.1
0.933 29.4
A.12 Sealed
Dimensions
(H x L x D)
2.00 13x27.75x13 0.996 31.7
QTC -3dB (Hz)
WWW.PRECISIONPOWER.COM
WWW.PRECISIONPOWER.COM
Loading...