INSTRUCTION MANUAL
LIVERT D’INSTRUCTIONS
CAR AUDIO
SUBWOOFER
HAUT-PARLEUR
SOUS GRAVES DE VOITURE
INSTRUCTION MANUAL
PA1004 | PA1204 | PA2100L
Introduction
Precision Acoustics products have been designed to deliver awesome performance and
the coolest look on the street! Learning from our past successes, our new products
have been developed with a whole new look and attitude. After all, we want you to have
a serious car audio system. Precision Acoustics would like to thank you for purchasing
its products.
Caution
Be advised that exposure to loud music for a long period of time may result in permanent hearing damage. Loud music can also distract you while driving, and prevent you
from reacting quickly to emergency situations. Precision Acoustics will accept no liability due to misuse of its products.
Description
Precision Acoustics’ subwoofers not only look hot, they pound! In order to develop
great bass performance, a subwoofer must be engineered from the ground up. Using a
proper balance of materials that control cone movement is essential in low frequency
reproduction. So what does it take?
To keep the cone linear in the voice coil gap, a butyl rubber surround is used and distortion is kept ultra low. Side and rear venting of the voice coil is incorporated to help
against thermal and mechanical failure. Heavy duty bindings posts ensure you get
maximum power to the subwoofer without having weak terminals compromise your
bass performance.
Features
• Paper cone with IMPP dust cap
• Butyl rubber, ultra linear surround
• Four layer KSV voice coil
• Strontium magnet structure
• Stamped steel basket
• Ventilated basket and back plate
• Heavy duty binding post terminals
Loading...