PRECISION HARDWARE
D-4990
TABLE OF CONTENTS
Introduction ........................................................................2
DA “Blue-Paint” Access ..................................................2
A
Features/Benefits ..............................................................3
Electrical Data Specifications ............................................4
How To Order ....................................................................4
NTRODUCTION
I
Stanley Security Solutions is pleased to offer its latest product line designed to
INTRODUCTION
ADA Access
door closing time, degree of door opening, and door and lock handle designs must all be addressed to satisfy the ADA guidelines.
maximize public door accessibility for Americans with Disabilities Act (ADA) Title
III applications. The D-4990 Low Energy Operator offers Stanley's newest and
most convenient features to gain safe access for ADA applications.
ADA is a civil rights law that is intended to guarantee equality for those who are
physically handicapped or disabled. There are four major sections of the bill and
they are intended to prohibit discrimination in Employment, Public Service, Public
Accommodations, and Telecommunications. Stanley Security Solutions’ focus is
on Title III (Public Accommodations). Title III is not a product specification or a
building code, but a directive to ensure equality in accessibility within public
buildings. Such things as door opening size, door opening force requirements,
Page
Page
Standard Applications ........................................................5
ypical System Applications ..........................................6, 7
T
Architectural Specifications ................................................8
Technical Details ............................................................8, 9
Accessories................................................................10, 11
D-4990 Low Energy Operator (Non-handed)
ADA “BLUE-PAINT” ACCESS
From the moment a physically disabled person enters the facility parking lot, they immediately begin looking for the ADA “bluepaint” and signage. All subsequent entry decisions are based on following the “blue-paint” pathways designed to provide access.
ADA “Blue-Paint” Access
After parking, attention quickly turns to locating a barrier-free ramp leading to the entry way and door actuator. Although the
Stanley D-4990 Low Energy Operator can be useful on a variety of locations, the ADA “blue-paint” clearly defines a need for
assisted ingress/egress.
ADA “BLUE-PAINT” ACCESS
ADA Door Opening Access
ADA Push Plates
2
LO W EN E R GY P O
Barrier-Free Access
FEATURES/BENEFITS
Access Controls: The D-4990 Low Energy Operator may be used with electric latch retraction exit devices, electric strikes,
and other electric locking systems. A time delay function is built into the control system eliminating the need for
upplemental relays or controls.
s
Activation: The D-4990 Low Energy Operator can be activated with the press of a switch. Virtually any form of “knowing
act” can be used to initiate the operator making integration with existing systems easier. For the full line of activation
devices that Precision hardware offers see page 10.
Push and Go Option: With the flip of a switch, the D-4990 Low Energy Operator can be configured to activate and open
based on a slight movement of the door. Utilizing this option eliminates the need for supplemental activation devices but
does not preclude their use.
Hold-Open Timer: Upon receipt of an activation signal, the operator will power open the door from the closed position. The
door may be held in the open position up to 28 seconds (compliance with ANSI/BHMA A156.19 requires the door to
remain in the open position for a 5 second minimum). Additionally, a “hold-open” switch is provided to hold the door open
for extended periods.
External Function Switches: The D-4990 Low Energy Operator is equipped with external function switches providing basic
controls.
• Illuminated Power Switch: Illuminated to be visible at night, the switch controls power to the operator motor. The
D-4990 Low Energy Operator functions as a manual closer with power off.
• Mode Control Switch: A three function switch is provided for control of the powered function of the operator. “Day”
mode will engage the operator for normal powered operation with activation by push plate, “Push and Go”, or signal
from other “knowing act” device. “Night” mode disables the operator for normal powered operation; however, the
operator can be configured to receive activation signals from a secure activation device such as a card reader for
secure activation, generally from one side. Switching to “Hold-Open” mode will power the operator opening the door,
holding it open indefinitely.
Obstruction Detection: During the opening cycle an obstruction function effectively reduces the possibility of personal injury
in accordance with A156.19. Additionally this feature prevents damage to door and/or surrounding structures. After a stall
time-out, the door will close at a rate and force set by the integrated hydraulic closer.
Power-Close Option: This switched feature can be used to control exterior openings that require additional closing force
to resist interior stack pressures and wind conditions that do not allow the door to close properly. Use this feature to
reduce heating and cooling loss and save energy and money.
D-4990 Door Closer:
• Adjustment: The D-4990 Low Energy Operator (which incorporates the Heavy Duty D-4550 Stanley Door Closer)
provides the industry's widest range of field adjustable spring power settings. This allows you to adjust the operator
for the correct opening and closing forces to meet any specific application. The closer within the D-4990 Low Energy
Operator also incorporates multiple regulating valves, including the V-Slotted Valve Regulation, which maximizes fine
tune adjustment capabilities.
• Door Closer Body: The incorporated D-4550 Stanley Door Closer body is constructed of R-14 Aluminum Alloy providing
wear resistance from contact with the piston during the opening and closing. In addition the R-14 Aluminum Alloy body
holds the Cylinder Body dimensionally stable under extreme internal hydraulic pressures.
FEATURES/BENEFITS
Internal Cycle Counter: The D-4990 Low Energy Operator comes equipped with two independent internal cycle counters.
The cycle counters provide current data on manual and powered operations.
Vestibule Function: Each D-4990 Low Energy Operator is equipped with a vestibule function control. This field selectable
function provides electronic sequencing to control the opening of doors within a vestibule application. Sequencing reduces
exposure to the exterior elements. Controlling the opening sequence of a paired vestibule, provides convenience and
saves energy to the facility.
Optional Power Supply: The optional PS-490 24VDC @ 0.5A power supply is available to provide power to auxiliary
electrified hardware such as electric strikes. This optional power supply can be mounted within the D-4990 Low Energy
Operator housing.
3
LECTRICAL DATA SPECIFICATIONS
E
• Power input: 115 VAC ±15% 60 Hz
• Current draw: 2A maximum (4 maximum number of operators per breaker)
• Auxiliary output: 24VAC @ 0.125A maximum
• Solid state output can signal electric strikes
For powering strikes see page 7.)
(
Certifications
• ANSI/BHMA A156.19 certified Standard For Power Assist And Low Energy Power Operated
Doors
• UL 325 Standard for Door, Drapery, Gate, Louver, and Window Operators and Systems or use
on fire and smoke check doors
• UL 228 Standard for Door Closers-Holders, With or Without Integral Smoke Detectors
• Meets requirements for UL 10B, 10C and UBC 7.2 for positive pressure
• Meets ADA – Americans With Disabilities Act
• Complies with ANSI 117.1 section 4.13
• In compliance with FCC 47 CFR Part 15 Class B emissions requirements (USA)
Exterior Finishes
628 – satin aluminum, clear anodized
313AN – dark bronze anodized
Warranty
Two years from the date of invoice
ELECTRICAL DATA SPECIFICATIONS
Package Includes:
• D-4990 Low Energy Operator (Non-handed)
• Standard Arm (PUSH side) or Track Arm (PULL side)
• Mounting template
• Technical manual
• Door closer spring adjustment wrench
• Tuning screwdriver
• Signs (see page 11)
HOW TO ORDER D–4990/D–4990T
D-4990 628
Model No. Finishes
D-4990 – standard arm (push side)
D-4990T – track arm (pull side)
HOW TO ORDER
page 5
Example: D-4990 Low Energy Operator x 628 finish.
2-CL2216-6" round push plates
628 – satin aluminum, clear anodized
313AN – dark bronze anodized
For special finishes consult factory
CL2248 – push plate mounting post– silver
CL2247 – push plate mounting post– black
CL2249 – push plate mounting post– bronze
CL2216 –6" round push plate– stainless steel
CL4163 –41/2" square push plate– stainless steel
CL2055 –11/2" x 41/2" jamb plate– stainless steel
CL2025 – touchless plate
CL4485 – radio control receiver
CL4490 – radio control transmitter
PS490 – power supply
314066 – signage kit
CL2212 – push plate package
CL2248
Accessories
page 10 & 11
4
LO W EN E R GY P O
STANDARD APPLICATIONS
D-4990 Standard
Arm
(PUSH Side)
• 65/8" (168mm) Maximum Reveal
D-4990 Push side
STANDARD APPLICATIONS
D-4990T Track Arm (PULL Side)
•1/8" (3mm) Maximum Reveal
For complete detailed drawings visit www.stanleytemplates.com
D-4990T Pull side
For complete detailed drawings visit www.stanleytemplates.com
5
YPICAL SYSTEM APPLICATIONS
T
D-4990 Low Energy Operator with PUSH–PULL
Operation:
• Free ingress & egress using low energy operator or bypassing the operator
and using door manually
• Door operator acts as standard door closer when entering or exiting manually
Material:
• Precision Low Energy Operator
• 2 Precision Door Actuators or Push and Go
• Local Power
115VAC
PUSH–PULL
D-4990 Low Energy Operator with Concealed Mag Lock for Glass Door Applications
TYPICAL SYSTEM APPLICATIONS
Operation:
115VAC
• Free entry when security system is shunted or off
• Entry after hours by card reader, which unlocks & activates low energy
operator
• Free egress at all times by touching push bar or using inside actuator, which
de-energizes mag lock and activates low energy operator
Material:
• Precision Low Energy Operator
• Electromagnetic Shear Lock and Power Supply (PS)
• Electrified Pivot
• Precision Touch Bar Sensor Kit (TBSK) PUSH–PULL Set
• Terminal Interface Enclosure (TIE)
• BEST Card Reader
• Precision Actuators
PS TIE
Card
Reader
Magnetic Lock for Glass Door
D-4990 Low Energy Operator with Vestibule
Operation:
• When exit device is dogged low energy operator can
be activated by external actuator
• When exit device is locked (Not Dogged) all actuators are
disabled (Ex: After hours at a school or library)
• Recommended dual vestibule actuator will re-open internal
or external doors (Ex: Student waiting for parent pick-up)
Material:
• 2 Precision Low Energy Operators
• 2 Precision Actuators (Internal, External)
• 1 CL2388 Precision Dual Vestibule Push Plate
(Recommended)
• Optional Precision Interior Vestibule Actuator
• Precision Exit Device with Cylinder Dogging
• Stanley Power Transfer Hinge
• 1 Precision Exit Dummy Trim
6
LO W EN E R GY P O
115VAC
Vestibule
TYPICAL SYSTEM APPLICATIONS
-4990 Low Energy Operator with Electric Strikes
D
Operation:
• Doors are to be closed and latched (Example: Fire Doors)
• Key switch shunts exterior actuator
(Example: After hours traffic control)
• When not shunted, actuators will signal electric strike power
supply and activate auto operators
• From secure side, egress by manually pushing exit devices or
using inside actuator to activate auto operators
Material:
• 2 Precision Vertical Rod Exit Devices
• Electric Strike & Precision PS490 Power Supply (PS)
• Key Switch
• 2 Precision Actuators
• 2 Precision Low Energy Operators
Electric Strikes
PS
115VAC
Key
Switch
D-4990 Low Energy Operator with Latch Retraction
Operation:
• Doors are to be closed and latched at all times
• When activated, latch bolts are retracted and door(s)
will automatically open
• Non-rated devices can be dogged for push/pull operation
Material:
• 2 Precision Low Energy Operators
• 1 Precision Power Supply
• 2 Stanley Electric Hinges
• 2 Precision Exit Devices with Electric Latch Retraction
• 2 Precision Actuators
• 1 CL2388 Precision Dual Vestibule Push Plate
115VAC
115VAC
TYPICAL SYSTEM APPLICATIONS
PS
Latch Retraction
7
ARCHITECTURAL SPECIFICATIONS
ow Energy Operators shall:
L
. Conform to ANSI/BHMA A156.19 as a low energy power opening device
1
. Be listed under UL228, UL325, UL10B, UL10C, UBC 7.2 and FCC listed
2
. Shall be non-handed and have operation range as follows:
3
. 90º powered, 180º manual [Push-side application, see page 5]
i
i. 90º powered, 120º manual [Push-side application, see page 5]
i
. Be rated for door panels weighing up to 350 lbs (160 kg)
4
. The manual door closer within the Low Energy Operator shall be adjustable to meet Americans with Disabilities Act (ADA)
5
5lbs opening force [Push-Side applications only]
6. Operator shall be isolated from mounting plate with rubber mounts to mitigate the transmission of forces between the
door and the operator
7. Shall have a position encoder that communicates with a microprocessor controller
8. Incorporate a resetable powered operation counter that tracks both powered and non-powered cycling of the Operator
9. Incorporate the following adjustable settings:
i. Hold Open Timer, to 28 seconds ii. Open Speed
iii. Backcheck Speed iv. Vestibule Sequence Timer
10. Include DIP switch controls for:
i. On board diagnostics ii. Power close
iii. Push and Go operation iv. Time delay logic for electrified hardware components
11. Include terminals for auxiliary controls including:
i. Activation devices; provide two discrete inputs
ii. Vestibule sequencing
ARCHITECTURAL SPECIFICATIONS
12. Control switches including:
i. Day/Night open (illuminated)
ii. Power On-Off
13. Includes adhesive Low Energy Operator mounting templates
14. R-14 Aluminum Alloy material
15. For non-powered operation, the unit shall function as a standard door closer with adjustable spring force size 1 thru 6.
TECHNICAL DETAILS
Control Box
Conduit Access
(Typical 1 of 9)
Micro-Switches
and Cams
Spindle
(Non-handed)
TECHNICAL DETAILS
Motor
Vibration Isolation
(Typical 1 of 4)
Operator
Spindle
(Non-handed)
D-4550 Non-handed
door closer
Close up of switch face
(shown on opposite side)
8
LO W EN E R GY P O
TECHNICAL DETAILS
Switch Settings
Factory default settings for normal operation;
ll switches on the DIP switch are set to OFF.
a
SETTING ON OFF
1. Electric strike logic fail secure fail safe
2. Electric strike enabled disabled
. PUSH side/ PULL side PULL side PUSH side
3
4. PUSH and GO enabled disabled
5. Power close enabled disabled
6. N/A
7. N/A
8. N/A
Controller
TECHNICAL DETAILS
1210 11 12 21 16 13 17 18 19 20
3 15 456 78914
1- TB-1
2- TB-3
3- TB-2
4- Pot #3 not used
5- Pot #1 Hold open time 0-28 seconds. Must be
a minimum of 5 seconds after door fully open
6- Pot #9 Vestibule time delay
7- Self test button
8- Pot #2 Full open position adjustment
9- Pot #4 Stall force
10- DIP switches (See chart above)
11- Digital readout
12- Pot #7 opening torque, only needs changed
for use on heavier doors
13- Pot #8 not used
14- Pot # 6 open sweep speed
15- Pot # 5 open check speed
16- Encoder plug input
17- AC power in
18- Fuse
19- N/A
20- Motor socket
21- N/A
9
O
ACCESSORIES
Push Plate Posts
Mounting post for stainless steel push plates.
Post Size: 41
ACCESSORIES
Note: Push plate post accepts the CL4163: 4
Activating Door Plates and Accessories
• CL2216: 6"round stainless steel plate with accessibility logo and “Push To Open” text
• CL2220: 6"surface mount box
• CL4163: 41/
• CL4638: 41/
• CL2055: 11/
• CL2245: 11/
• CL2388: Dual vestibule push plate with text, accessibility logo and directional arrows
• CL2025: Touchless plate includes single and double gang face plates (see below)
• CL4490: Radio control transmitter (with 9V battery)(433 Mhz)
• CL4485: Radio control receiver (433 Mhz)
• CL4488: Digital Keychain Transmitter (433MHz) (1 button)
• PS490: PS-490 Power supply 24VDC @ 0.5A
• CL2248: Silver mounting post
• CL2247: Black mounting post
• CL2249: Bronze mounting post
1
2
/
"
H x 61/
2
"
square stainless steel plate with accessibility logo and “Push To Open” text
2
"
surface mount box
2
"
x 43/
2
"
x 43/
4
"
W x 41/
4
"
Jamb stainless steel plate with accessibility logo and “Push To Open” text
4
"
surface mount box
4
"
D.
CL2247
Push Plate Post
1
2
/
"
square plate only.
(Black)
Switch Plate Packages
• CL4976: Includes (2) CL4163 Text & Logo plates, (2) CL4638 boxes, (2) CL4490 (9 volt) Transmitters, (1) CL4485 Receiver
• CL4977: Includes (2) CL4163 Text & Logo plates, (2) CL4638 boxes –
• CL4980: Includes (2) CL2102 Text & Logo plates, (2) CL2236 boxes, (2) CL4490 (9 volt) Transmitters, (1) CL4485 Receiver
• CL4981: Includes (2) CL2102 Text & Logo plates, (2) CL2236 boxes –
• CL4990: Includes (2) CL2216 Text & Logo plates, (2) CL2220 boxes, (2) CL4490 (9 volt) Transmitters, (1) CL4485 Receiver
• CL4991: Includes (2) CL2216 Text & Logo plates, (2) CL2220 boxes, –
CL2216
"
Round Plate
6
CL4163
1
2
/
"
Square Plate
4
1
HARD WIRED SOLUTION ONLY
HARD WIRED SOLUTION ONLY
HARD WIRED SOLUTION ONLY
CL2055
1
2
/
"
x 43/
4
"
Jamb Plate
CL2388
Dual Vestibule Push Plate
10
CL2220
6"Surface Mount Box
CL4638
1
2
/
"
Surface Mount Box
4
LOW ENERGY P
CL2245
1
2
/
1
"
x 43/
4
"
Surface Mount Box
CL2025
Touchless Plates
(both plates supplied)
ACCESSORIES (continued)
ACCESSORIES
CL4480
Digital Keychain Transmitter
CL4490
Transmitter
• 314066: Kit contains 7 signs, supplied with D-4990 Low Energy Operator
CL4485
Radio Control Receiver
PS490
Power Supply
SIGNS
SIGNS
1-supplied
2-supplied 2-supplied
WER OPERATOR
1-supplied
1-supplied
11
PRECISION HARDWARE
For more information on Stanley Security Solutions’ products, services, and office locations visit our web site at www.stanleysecuritysolutions.com
Product information contained in this catalog has been com piled and presented with as much care and com plete ness as is reasonably possible. Errors
or mistakes may be present, and in many cases, reliance has been placed on information supplied by other manufacturers which may be in error or
which may be subject to changes or mod i fi ca tions by the man u fac tur er with out no tice and without obligation. Therefore, no guar an tee can be made or
should be assumed or implied with regards to product in for ma tion con tained in this catalog.
Stanley Security Solutions, Inc.
6161 E. 75th Street Indianapolis, Indiana 46250
www.stanleysecuritysolutions.com
© 2009 Stanley Security Solutions, Inc. and Stanley Logistics
10M R509
PHI012
Loading...