Page 1
TACTIVO™ mini
for Android
User Reference Guide
Page 2
INDEX
1. Introduction
2. General Information
3. System Requirements
4. Card Reader
5. Installation
6. Maintenance
7. Using Tactivo
7.1 Correct nger placement
7.2 Enhancing ngerprint image quality
8. Apps for Tactivo
9. Electromagnetic Compatibility
10. Environment
Trademarks: Tactivo™ and PRECISE BIOMETRICS™
Patent: patents pending in EU and USA
©Precise Biometrics 2013-2014
Page 3
1. Introduction
Tactivo™ mini smart card and ngerprint reader makes strong
authentication easy and convenient using a smart card, ngerprint, or both.
For more information on Tactivo mini and available apps, visit
www.precisebiometrics.com.
2. General Information
Tactivo mini for Android should only be used with Android devices with a
micro USB port, but the smart card reader functionality can also be used on
Windows (XP or later) and OS X (Mountain Lion or later) desktop computers
by using the micro USB port and the provided micro USB to USB cable. OS X
support may require additional con guration. Tactivo mini adds smart card
and ngerprint functionality to an Android device and should not be used
for any other purpose.
Do not allow Tactivo mini in contact with water or other uids. If this
happens, immediately remove the Tactivo mini from the Android device
and let it dry thoroughly. Do not dry Tactivo mini using any external sources,
such as hair dryers and microwave ovens.
Tactivo mini is designed to work in the temperature range 32-95°F (0-35°C)
and can be stored in the range -4-113°F (-20-45°C )
Handling of Tactivo mini is the user’s responsibility and any action that can
damage the product is the user’s own responsibility. Do not paint, drop or
disassemble Tactivo mini, and do not put it in places or in devices where it
can be damaged such as in a clothes dryer.
Tactivo mini may contain small parts which may present a choking hazard
for small children. Keep such parts away from small children.
3. System Requirements
Usage of Tactivo mini requires an Android device running 4.0 or later that
has a micro USB port and USB On-The-Go (OTG) support. Using the smart
card reader functionality of the Tactivo mini on a desktop computer requires
Windows XP or later or OS X Mountain Lion or later.
4. Card Reader
The card reader in Tactivo mini supports ISO 7816-4 compatible smart cards
including U.S. credentials PIV, PIV-I, TWIC, and CAC. Embossed cards are
also supported. Do not use the card reader for other cards or for storage of
other things such as business cards.
Page 4
2. If you have a smart card,
slide it in.
1. Plug in your Tactivo mini either directly into your device with the built-in USB
cable (A) or by using a separate standard USB cable (B).
5. Installation
Always make sure that the built-in USB cable of the Tactivo mini is properly aligned
with the corresponding connector of the Android device before connecting. Bending
while connecting or disconnecting might damage Tactivo mini and the built-in USB
cable. When removing the Tactivo mini from the Android device, make sure to pull
the thick plastic surrounding the micro USB connector. Removing the Tactivo mini by
pulling the housing of the unit may damage the Tactivo mini or the micro USB port
on the Android device. Never force a connector into a port, as this may damage the
product.
6. Maintenance
Protect Tactivo mini from any kind of physical damage.
Ensure that you are electrostatically discharged before putting your
nger on the sensor. High electrostatic discharges might damage the
ngerprint sensor.
Keep the sensor surface clean or there is an increased risk that the
ngerprint can’t be successfully matched.
If necessary, clean the sensor surface with a clean cotton cloth. You can
dampen the cloth slightly with a cleaner.
Do not use paper tissues for cleaning purposes as they may scratch the
surface.
Do not spray cleaner directly onto the device.
Do not use chlorine-based cleaners, non-chlorine bleach, or chlorinebased bathroom or mildew cleaners.
Do not use any solvents, such as acetone, paint thinners, turpentine, etc.
Tactivo as Desktop Reader
Tactivo can be connected to stationary and laptop devices running on Windows/
OS X for secure authentication using the smart card.
1.
Remove the mobile device from the Tactivo.
2.
Connect to the Windows or OS X device using the provided micro-USB cable.
3.
Windows devices install drivers automatically.
OS X devices may need altered CCID settings to run.
Instruction for OS X devices available on www.precisebiometrics.com
Page 5
7.1 Correct Finger Placement
Correct and consistent nger placement is crucial for good performance.
1. Fingerprint sensor
2. Make sure to capture
this area on your nger
3. Swipe your nger
at on the sensor
in a rm downward
movement
4. Do not rotate your nger and
make sure it is not misaligned
5. Do not lift nger when swiping
and do not use only the ngertip
7.2 Enhance Fingerprint Image Quality
If your nger is very dry:
Try to press more rmly when swiping.
Breathe on your nger.
If your nger is very damp:
Try to press less rmly when swiping.
Wipe your nger dry.
More tips
See the “Maintenance” section to learn how to keep the sensor
surface clean.
If your ngerprint is still not recognized, please consider
re-enrollment to get a better reference image.
Page 6
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit di erent from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modi cations not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
CONTACT: Precise Biometrics Inc.,
11951 Freedom Drive, 13th Floor
Reston, VA 20190
1(800) 609-0578
10. Environment
RoHS compliant
WEEE compliant
The Tactivo mini should be recycled as an electrical waste
8. Apps for Tactivo mini
The use of apps for Tactivo is entirely at the user’s sole risk. Precise Biometrics
has no liability whatsoever and disclaims all responsibility for the usage of
apps for Tactivo.
9. Elecromagnetic Compatibility
Electromagnetic compatibility (EMC) is the ability of electronic equipment
to function properly together in the electronic environment.
CE Notice (Europe)
Tactivo meets the following technical standards:
• EN 301 489-1:2011
• EN 55022:2006 – A1:2007
• EN 61000-4-2:2008
• EN 61000-4-2:2008
FCC Information (USA)
Tactivo mini for Android (P/N SAA 133 1003) complies with Part 15 (Class B)
of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
ASP 140 1002 – 4160/6 RA
Loading...