Page 1
Configuring a LogTag recorder
Quick start guide
Step
1
Download the LogTag analyzer software:
http://www.praxas.com/nl-nl/Support/Downloads
Step
2
Connect the LogTag USB interface to your
computer by using the USB cable.
Step
3
Click on the LogTag Analyzer icon. A new screen
will be opened.
Step
4
Place the recorder in the LogTag USB interface.
Step
5
Click on ‘LogTag’ and in the pulldown menu
on ‘Wizard’.
Need support? Our team is ready to give you the daily support you need. You can reach us at
phone number +31 76 50 40 268 or via e-mail at [email protected]. This quick start guide is avaliable at www.praxas.com.
Page 2
Configuring a LogTag recorder
Quick start guide
Step
6
Configure the LogTag recorder with the settings you
require.
When you are finished, click on ‘Ok’.
Step
7
The ‘LogTag Configure’ screen will be opened.
As soon as you can see a green checkmark in the
‘Location’ area, the recorder is ready to be configured.
Step
8
Click on ‘Again’. The configuration of the recorder is
started.
The recorder has been configured when you see the
green text. It is ready for use now.
Step
Repeat these steps for every recorder.
9
Need support? Our team is ready to give you the daily support you need. You can reach us at
phone number +31 76 50 40 268 or via e-mail at [email protected]. This quick start guide is available at www.praxas.com.
Loading...