Page 1
USB Flash Drive
Card Drive U510 Soccer
Card Drive U510 Pro
Card Drive U510
BB58 Series
Rev. A.2 Sep 2006
Page 2
USB Flash Drive
Table of Contents
1. Introduction to Card Drive ........................................................................................................ 1
2. Main Features Overview ………..……….....................……...…...……………………………...… 1
3. Hardware Specification ………………………………………….………….……………………..… 1
3.1 USB Interface ………………………..…………………..…….........…………...….......……….…… 1
3.2 NAND Flash Interface …………………………………………….........…..…...…..……….......……. 1
3.3 OS Support ……………………………………………………….......……..…...……….….......…… 1
3.4 Product Capacity ………………………………………………..……......………...……….......……. 1
4. Block Diagram ........................................................................................................................... 2
5. Absolute Maximum Ratings ..................................................................................................... 2
6. DC Characteristics .................................................................................................................... 3
7. Recommended Operating Conditions ......................................................................................4
8. Pin Assignments ....................................................................................................................... 4
9. Physical Specifications ............................................................................................................. 5
Rev. A.2 Sep 2006
Page 3
USB Flash Drive
Revision History
Revision Date History Remark
A.0 05/03 ‘06 New Creation
A.1 09/04 ‘06 Hardware Specification Modify
A.2 09/28 ‘06 Main Features Overview Modify
Important!! Please make sure the driver matches the part number on your pen drive before you download.
Software AP System Requirements. One of following operation systems: Windows 98/98SE/Windows ME/Windows 2000/Windows XP
The advertised memory capacity of this device represents unformatted capacity. Please note that once formatted and due to variations in flash
module block limitations, the functional storage space will be lower than the advertised capacity.
“PQI reserves the right to make changes without notification when fit, form, function, quality and reliability are not affected. The data sheets do
not constitute contract documents and should not be considered part of the specification for purposes of any warranty.”
Rev. A.2 Sep 2006
Page 4
USB Flash Drive
1. Introduction to Card Drive
The latest PQI portable storage device is available with a whopping 16GB capacit y and measures only 3mm thin.
Image a credit card size device that requires no external power to function and stores any type of data you put to it.
Sporting all the functions of a USB (2.0/1.1) compatible device, functional on Windows or Mac OS, it definitely packs
more value into your wallet.
2. Main Features Overview
♦ Ultra transfer rate: Read up to 25MB/sec (U510 PRO only)
♦ 3mm Thin
♦ Retraction Connector
♦ Aluminum Alloy Casing
♦ PQI’s patented Intelligent Stick
♦ Multimedia or Data Storage
♦ Mobile USB flash drive, USB 2.0 compatible
♦ Hot swappable, USB Plug & Play compatible
♦ LED indicator with two model: Busy, waiting
♦ Low power consumption
♦ Its small size marking it easy to carry and store
♦ Built-in personal customizable software (USB Notebook Professional)
3. Hardware Specification
USB Interface High-speed USB 2.0 interface; backward compatible with USB 1.1
TM
interface
NAND Flash Interface Integrated ECC circuits for 4-bit error correction
OS Support No drive is required for Windows ME, 2000,XP or Mac OS 9.x
Environment
Temperature
Vibration
Shock resistant
Operating 0℃ to 65℃
Non-Operating -20℃ to 75℃
Operating 0.2G
Non-Operating 15G
Operating 150G
Non-Operating 1000G
Configuration
1GBytes ~ 4GBytes (U510 Soccer only)
Capacity
4GBytes ~ 16GBytes (U510 Pro)
1GBytes ~ 16GBytes (U510)
Reliability
MTBF(@25℃) 1,000,000 hours
Power Requirement
Voltage DC 3.3/5V ± 10%
Power Consumption
Read <100mA
Write <100mA
Standby <100mA
Un-configuration <100mA
Suspend <1.0.mA
Rev . A.2 1/5 Sep 2006
Page 5
USB Flash Drive
4. Block Diagram
Program ROM
8051 Micro
USB2.0
USB1.1
Host
USB2.0 or
1.1 Port
Controller
Data /
Address
Bus
USB 2.0
Interface
PLL, REG
CLK
PWR_GOOD
PWR_RST
Program RAM
DMA
EDC/
ECC
DA TA RAM
Flash
Control
Logic
Flash
Memory
5. Absolute Maximum Ratings
Symbol Parameter Min Max Unit
Tstorage Storage Temperature -20 75 ℃
Ta Ambient Operating Temperature 0 65 ℃
Vcc3 3.3V Supply Voltage -0.3 3.6 V
Vcc18 1.8V Supply Voltage -0.3 2 V
Vin3.3 3.3V Buffer Input Voltage -0.3 3.6 V
Vin3/5 3.3V/5V Buffer Input Voltage -0.3 5 V
Vin1.8 1.8V Buffer Input Voltage -0.3 2 V
Rev . A.2 2/5 Sep 2006
Page 6
USB Flash Drive
6. DC Characteristics
Symbol Parameter Min. Max. Unit Notes
VIH_TTL TTL Input High Voltage 2 Vcc3+0.3 V
VIL_TTL TTL Input Low Voltage -0.3 0.8 V
VOH_TTL TTL Output High Voltage 0.9 X Vcc3 V
VOL_TTL TTL Output Low Voltage 0.45 V
IOH_TTL TTL Output High Current -4 mA
IOL_TTL TTL Output Low Current 4 mA
VIH_USB
VIL_USB
VI_USB_DIFF
VI_USB_CM
VI_USB_HSSQ
VI_USB_HSDSC
VI_USB_HSCM
VOH_USB
VOL_USB
VOH_USB_HS
VOL_USB_HS
IOH_USB
IOL_USB
IOH_USB_HS
IOL_USB_HS
USB Input High Voltage for
Low-/full-speed
USB Input Low Voltage for
Low-/full-speed
Differential Input Sensitivity for
Low-/full-speed
Differential Common Mode Input
Range for Low-/full-speed
USB High-speed squelch Input
detection threshold
USB High-speed disconnect
Input detection threshold
USB High-speed Signaling
Common Mode Range
USB Output High Voltage for
Low-/full-speed
USB Output Low Voltage for
Low-/full-speed
USB Output High Voltage for
High-speed
USB Output Low Voltage for
High-speed
USB Output High Current for
Low-/full-speed
USB Output Low Current for
Low-/full-speed
USB Output High Current for
High-speed
USB Output Low Current for
High-speed
2.0 V
0.8 V
TBD V
0.8 2.5 V
0.10 0.15 V
0.525 0.625 V
-0.05 0.5 V
2.8 3.6 V
0 0.3 V
0.36 0.44 V
-0.01 0.01 V
-10 mA
10 mA
-40 mA
40 mA
Rev . A.2 3/5 Sep 2006
Page 7
USB Flash Drive
7. Recommended Operating Conditions
Symbol Parameter Min. Typical Max. Units
Vcc33 Power Supply Voltage 3.0 3.3 3.3 V
Vin Input Voltage 0 Vcc Vcc+0.3 V
Vcc25 Internal Power Support 2.25 2.5 2.75 V
8. Pin Assignments
Pin No. Pin Name Function
1 VCC USB power input
2 USB D- USB differential signal
3 USB D+ The pairs are used to transmit Data/Address/Command
4 VSS Ground
Rev . A.2 4/5 Sep 2006
Page 8
USB Flash Drive
9. Physical Specifications
9.1 Dimensions:
9.1.1 Height: 85.0mm
9.1.2 Width: 54.0mm
9.1.3 Depth: 3.0mm
9.1.4 Weight: 22.8g ± 2g
9.2 Outline of top view
Rev . A.2 5/5 Sep 2006
Loading...