Page 1
Approval Sheet
Product ： Card Drive i512
Part Number： 6512-XXXXRXXXX
Description ： Card Drive i512
Release Date ： 2010.06.15
Customer ：
Customer approve：
Approved
Prepared by
LEVEL Person
DSP10002 Rev. A.0 June. 2010
Page 2
Approval Sheet
說明事項：
1、 此交貨規格書，請簽名或蓋章承認後，將正本寄回本公司。
2、 此交貨規格書若需變更內容，請與本公司協議後標示變更處後送回，本公司將發行更正版供簽署
承認。
3、 若待承認產品使用於非本公司先前同意之用途及條件時，請先通知我方對應窗口。
4、 本公司努力提升產品品質及可靠度，惟半導體產品有其故障發生之或然率，因此本公司半導體產
品之設計，係以不造成人身傷害事故、火災事故、公共安全事件的考量為設計前提。
5、 此產品為一般半導體應用製品、電化產品(個人電腦、一般事務性機器、測量機器、一般家電等)
之使用設定，因此不建議使用在偶發之故障或錯誤動作將可能造成人體危害或致命傷害危險性之
用途(如：原子力控制機器、航空宇宙控制機器、運輸控制機器、醫療機器及各種安全裝置等)，
若產品使用於以上機器或裝置，本公司不負保證責任。
6、 此交貨規格書說明承認產品之規格、使用、內容等各項資訊，惟對於任何第三人之智慧財產權，
不負使用承諾及內容保證之責。
7、 本產品不得使用在與國內外法令、規則及命令禁止使用及販賣的產品上。
8、 對於因購買、使用或無法操作本產品所造成之損害、費用或財產、利潤喪失及其他不論偶發的、
必然的損害本公司不負責任。本公司的保證，僅限於對該產品的修理及退換服務或退款。
Note：
1. Please sign-off or stamp with company-seal on the Delivery Specification and return
the original copy back to PQI.
2. To change Delivery Specification contents or descriptions must be negotiated with PQI in
advance. Any changes made will be result in the issuing of a revised version to be signed-off
or stamp with company-seal.
3. Products that are not in agreement of prior conditions or purposes, please notify your PQI
contact window in advance.
4. PQI strives to provide quality products and excellent reliability but nevertheless, malfunction
is a nature of semi-conductor. Therefore, in addition to product quality, all designs are aimed to
provide protection from causing personal harm, fire, endangering the public, etc.
5. This is a general semi-conductor / electronic product (personal computer, general purpose
stationary goods, quantitative machine, general household electronics, etc.). Therefore, its
intended purposes is not for use when it is damaged or incorrectly operated (human error)
which may result in bodily harm (eg. intended use not for medical equipments, nuclear, aviation
and transportation controllers). PQI shall not be held liable if the product is used coincide with
machineries described not for intended use.
6. The “Delivery Notice” states product specifications, instruction manual, etc. PQI does not
guarantee the violation of third party intellectual property rights.
7. This product is not to be use or sold in overseas countries where legislations states such
products may be banned or restricted.
8. PQI shall not be held liable for any damages, expenses, loss of profit as a result from the
purchase, use or incorrect operation, whether it may be accidental or consequential. PQI’s
guarantee only extends to the repair, exchange or refund of the purchased product.
DSP10002 Rev. A.0 June. 2010
Page 3
Datasheet
Card Drive i512
6512-XXXXRXXXX
DSP10002 Rev. A.0 June. 2010
Page 4
Datasheet
Table of Contents
1. Introduction to i512................................................................................................................... 1
2. Main Features Overview........................................................................................................... 1
3. Product Specification............................................................................................................... 1
4. Block Diagram........................................................................................................................... 2
5. Absolute Maximum Ratings.....................................................................................................2
6. DC Characteristics.................................................................................................................... 3
7. Recommended Operating Conditions..................................................................................... 3
8. Pin Assignments....................................................................................................................... 3
9. Physical Specifications............................................................................................................ 4
10. Package Requirements...........................................................................錯誤! 尚未定義書籤。
DSP10002 Rev. A.0 June. 2010
Page 5
Card Drive
1. Introduction to i512
The colorful housing of i512 has taken the world by storm with it's ultra thin design. Using specialized packaging
technique, it is water, dust, shock and vibration proof. Compatible with USB 2.0 / 1.1 specifications with low power
consumption and data protection.
2. Main Features Overview
♦ Mobile USB flash drive, USB 2.0 compatible
♦ Hot swappable, USB Plug & Play compatible
♦ Multimedia and data storage
3. Product Specification
USB Interface
High-speed USB 2.0 interface; backward compatible with USB 1.1
NAND Flash Interface
OS Support
Environment
Temperature
Vibration
Thermal Shock Non-Operating 0℃ to 65℃
ESD -Test B level
Configuration
Capacity 4GBytes ~ 32GBytes
Power Requirement
Voltage DC 3.3/5V ± 10%
Power Consumption
Read <100mA
Write <100mA
Standby <100mA
Integrated ECC circuits for 4-bit error correction
No drive is required for Windows ME, 2000, XP or Mac OS 9.x
Operating 0℃ to 65℃
Non-Operating -20℃ to 75℃
Operating 1.52G
Non-Operating 6G
Un-configuration <100mA
Suspend <2.5mA
Rev . A.0 1/5 Apr. 2010
Page 6
Card Drive
4. Block Diagram
5. Absolute Maximum Ratings
Symbol Parameter Min Max Unit
Tstorage Storage Temperature -20 75 ℃
Ta Ambient Operating Temperature 0 65 ℃
Vcc3 3.3V Supply Voltage -0.3 3.6 V
Vcc18 1.8V Supply Voltage -0.3 2 V
Vin3.3 3.3V Buffer Input Voltage -0.3 3.6 V
Vin3/5 3.3V/5V Buffer Input Voltage -0.3 5 V
Vin1.8 1.8V Buffer Input Voltage -0.3 2 V
Rev . A.0 2/5 Apr. 2010
Page 7
Card Drive
6. DC Characteristics
Symbol Parameter Min. Typical Max. Units
VDD Supply voltage for VCC3 or VCC3A
Regulator output voltage for VCC or
VDD18
VCCA
VIL Input Low Voltage
VIH Input High Voltage
VOL Output Low Voltage (IOL=4mA)
VOH Output High Voltage (IOH=4mA)
CIN Input pin capacitance
IDD Supply current
ISUS Suspend current (D+1.5KΩ)
3.0 3.3 3.6
1.62 1.8 1.98 V
-0.5 0.8 V
2.0 V
0.4 V
2.4 V
10
50 mA
300 uA
7. Recommended Operating Conditions
Symbol Parameter Min. Typ. Max. Units
VCC33 3.3V Supply Voltage 3.0 3.3 3.6 V
USBVIN USB 5V Supply Voltage 4.5 5 5.5 V
VCC18 1.8V Supply Voltage 1.6 1.8 2 V
8. Pin Assignments
V
pF
Pin No. Pin Name Function
1 VBUS Power supply
2 DM - USB D-
3 DP - USB D+
4 GND Ground Connection
Data input/output: The bidirectional I/O transfers address, data
and instruction information
Data input/output: The bidirectional I/O transfers address, data
and instruction information
Rev . A.0 3/5 Apr. 2010
Page 8
Card Drive
9. Physical Specifications
9.1 Dimensions:
9.1.1 Height: 85.00mm±0.1mm
9.1.2 Width: 54.00.45mm±0.1mm
9.1.3 Depth: 3.3mm±0.1mm
9.2 Outline of top view
Rev . A.0 4/5 Apr. 2010
Loading...