PPG Pittsburgh Paints 65053 User Manual

Radiator Pressure

Test Kit

65053 Test Kit

INSTRUCTIONS AND

PRECAUTIONS

Visit our website at:

http://www.harborfreight.com

Read this material before
using this product.
Failure to do so can result
in serious injury.
SAVE THIS MANUAL.

When unpacking, make sure
that the product is intact and
undamaged.
If any parts are missing or broken,
please call 1‑800‑444‑3353
as soon as possible.

Copyright© 2011 by Harbor Freight Tools®.
All rights reserved. No portion of this document
or any artwork contained herein may be
reproduced in any shape or form without the
express written consent of Harbor Freight
Tools. Diagrams within this document may
not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly
from the product described herein. Tools required
for assembly and service may not be included.

For technical questions or replacement

parts, please call 1‑800‑444‑3353.

Important Safety Information

1. TO PREVENT STEAM BURNS,

DO NOT OPEN HOT OR
WARM RADIATOR CAP.

2. Loosen the vehicle’s radiator cap
slowly to relieve any excess pressure
before removing the cap completely.

3. Keep away from hot engine

parts and uids.

4. Use this product only according
to these instructions. Improper
use can create hazards.

5. Wear ANSI‑approved safety goggles
and heat resistant work gloves
during product assembly and use.

6. Refer to the vehicle’s service

manual for specic radiator pressure

testing instructions before use.

7. Clean up coolant spills

immediately. Dispose of uids

according to local, state, and
federal codes and regulations.

8. Keep work area clean and well lit.

9. Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
product in unexpected situations.

10. Keep bystanders out of the area
during assembly and use.

11. Do not assemble or operate when

tired or when under the inuence

of drugs or medication.

12. This product is not a toy. Do
not allow children to play with
or near this product.

13. Use as intended only.

14. Inspect before every use. Do not
use if parts missing or damaged.

15. Maintain product labels and
nameplates. These carry important

safety information. If unreadable
or missing, contact Harbor Freight
Tools for a replacement.

Product Component List

NOTE: All the parts are numbered.

See the photo on page 3.

1. Hand Pump: Features color‑
coded Pressure Gauge, Pressure
Release Valve, Quick Coupler.

2. Adapter: For use with Skoda®, SAAB®,
Ford®, Daewoo®, Audi® A4, A5, A6.

3. Adapter: For use with Skoda®,
Seat®, Audi®, Opel®, V.W.®, Ford®.

4. Adapter: For use with Seat®,
ALFA Romeo®, Audi®, B.M.W.

5. Adapter: For use with
Rover®, B.M.W.

6. Adapter: For use with Rover®,
Opel®, Volvo®, Citron®,
Renault®, Fiat®, Peugeot®.

7. Adapter: For use with Lancia®,
Volvo®, Rover®, Renault®,
Peugeot®, Opel®, Honda®,
Fiat®, Citroen®, Audi®, V.W®.

8. Adjustable Stationary Seat
to include: Toyota®, Suzuki®,
Nissan®, Mitsubishi®, Mercedes®,
Chrysler®, Citroen®.

9. 50mm Seat: Use with item 8 above
(Adjustable Stationary Seat) for
Japanese cars, European car series.

10. 35mm Seat: Use with item 8 above
(Adjustable Stationary Seat) for
Japanese car series, European cars to
include: Suzuki®, Nissan®, Mitsubishi®,
Chrysler®, Citroen®, Mercedes®.

11. 27mm Seat: Use with item 8
above (Adjustable Stationary Seat
for Japanese cars, European cars:
Toyota®, Suzuki®, Nissan®.

®

®

Page 2 For technical questions, please call 1‑800‑444‑3353. SKU 65053