Page 1
Safety, Operation, and Maintenance Manual for
WET/DR Y V A CS
Models PF25, PF25SR, PF27, PF35, PF35SR,
PF39, PF40
Read and follow all instructions,
warnings and cautions before
using this vacuum/blower!
X
8450
Page 2
SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING!
CARE OF THIS VACUUM CLEANER
Treat this unit as you would any other high grade
precision made product. Dropping, unreasonable bumping across thresholds and other misuses may result in a damaged unit which will not
be covered by warranty. When not in use, power
cord should be wrapped around motor head for
storage.
Read this manual completely before operating
this vacuum. It is important to follow instructions
in this manual to prevent the possibility of injury
or damage to the user and/or machine.
Congratulations on purchasing a Powr-Flite® wet/dry vacuum. Given proper care, this product will afford you many
years of trouble-free operation. All parts have passed rigid
quality control standards before being
assembled to produce the finished product.
Prior to packaging, the vacuum cleaner is again inspected
for assurance of flawless assembly. This unit is protectively packed to prevent damage in shipment. We recommend removal and inspection of unit upon delivery for possible damage in transit. Only a visual examination will
reveal damage that may have occurred.
If damage is discovered, immediately notify the transportation company that delivered your vacuum.. As a shipper,
we are unable to report claims for concealed damage.
You must originate any claim within 5 days of delivery.
This manual is for your protection and information.
PLEASE READ CAREFULLY since failure to follow precautions could result in discomfort or injury. When using
electrical equipment, basic safety precautions should
always
be followed.
THANK YOU FOR CHOOSING POWR-FLITE
®!
TABLE OF CONTENTS
SAFETY PRECAUTIONS (English) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
GROUNDING INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
SAFETY PRECAUTIONS (Spanish) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
ILLUSTRATED PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6,7
Tool Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
OPERATING INSTRUCTIONS
Dry Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Wet/Dry Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ASSEMBLY INSTRUCTIONS
Vacuum Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Tools & Attachment Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . 9
REMOVAL OF LIQUIDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
FILTER INSTALLATIONS AND REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . 10
SAFETY PRECAUTIONS (French) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
MAINTENANCE GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Page 3
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY PRECAUTIONS
WWAARRNNIINNGG!!:: To reduce the risk of fire, electric shock or injury
When using this electric vacuum / blower, basic precautions
should always be followed, including the following:
1) DO NOT leave unit when plugged in. Unplug from
outlet when not in use and before servicing.
2) DO NOT allow unit to be used as a toy. Close
attention is necessary when used around or near
children.
3) Use only as described in this manual. Use only
manufacturer’s recommended attachments.
4) DO NOT use with damaged cord or plug. If unit is
not working properly because it has been dropped,
dropped into water, left outdoors, or damaged in any
way, contact a service center of Powr-Flite®.
5) DO NOT pull or carry by cord, use cord as a handle,
close door on cord, or pull cord around sharp edges
or corners. DO NOT run unit over cord. Keep cord
away from heated surfaces.
6) DO NOT unplug by pulling on cord. To unplug, grasp
the plug, not the cord.
7) DO NOT handle plug or appliance with wet hands.
8) DO NOT put any objects into openings. DO NOT use
with any opening blocked: keep free of dust, lint,
hair, or anything that may reduce air flow.
9) Keep hair, loose clothing, fingers, and all parts of
body away from openings and moving parts.
10) DO NOT pick up anything that is smoking or
burning such as cigarettes, matches, or hot ashes.
11) DO NOT use without dust bag and/or filters in place
for dry operation, and wet adapter for wet operation.
12) Turn off all controls before unplugging.
13) Use extra care when cleaning on stairs.
14) DO NOT use use to pick up flammable or combustible liquids such as gasoline or use in areas
where they may be present.
15) DO NOT use where oxygen or anesthetics are used.
16) DO NOT use an extension cord unless absolutely
necessary. If an extension cord is used, then wire
size must be #14 or larger and should not exceed
50 ft.. in length. Extension cord must be a three-wire
type to insure grounding protection.
17) Replace damaged or worn parts immediately with
genuine original equipment parts to maintain safety.
18) This unit must be connected to a properly grounded
outlet only. See grounding instruction. If your
vacuum//blower has an outlet for a motorized power
nozzle, always turn it off before connecting or
disconnecting the motorized nozzle.
FOR DRY UNITS
Electric shock could occur if
used on wet surfaces.
DO NOT expose to rain.
Store Indoors
FOR WET UNITS
To avoid electric shock, DO
NOT expose to rain. Store
Indoors. Electric shock could
occur if power nozzle is used
on wet surfaces.
Page 4
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
D ANGER: Improper use of the grounding plug can result in a risk of electric shock.
GROUNDING INSTRUCTIONS
GROUNDING METHODS
This vacuum/blower must be properly grounded. If it
should malfunction or breakdown, grounding provides a
path of least resistance for electrical current to reduce the
risk of electric shock. This machine is equipped with a
cord having an equipment-grounding conductor and
grounding plug. The plug must be inserted into an
appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
If repair or replacement of the cord or plug is necessary,
DO NOT connect the grounding wire to either flat blade
terminal. The wire with insulation having an outer surface
that is green with or without stripes is the grounding wire.
This unit is for use on a nominal 120 volt circuit, and has a
grounded plug that looks like the plug illustrated in (Fig.
A). Atemporary adapter that looks like the adapter illustrated in (Fig. B&C) may be used to connect the plug to a
2-pole receptacle as shown in (Fig. B) if a properly
grounded outlet is not available.
The temporary adapter should be used only until a properly grounded outlet (Fig. A) can be installed by a qualified
electrician. The green color rigid ear, lug, or the like
extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box
cover. Whenever the adapter is used, it must be held in
place by a metal screw.
NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian
Electrical Code.
WARNING!
Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or service person if you are in doubt as to whether
the outlet is properly grounded. DO NOT modify the plug provided with the appliance. If it will
not fit the outlet, have a proper outlet installed by a qualified electrician.
Page 5
GUARDE ESTES INSTRUCTIVOS
MEDIDAS DE SEGURIDAD
PPEELLIIGGRROO!!:: Para reducar el riesgo de incendio,descarga electrica o daño:
PARA SU SEGURIDAD
INSTRUCCÍONES DE TIERRA
1) NO DEJE la aspiradora enchufada. Desconectela
cuando no la use y antes de darle servicio.
2) NO PERMITE que se use como juguete. Ponga
attencion cuando se use cerca de niños.
3) USE SE SOLAMENTE de acuerdo a las instruc-
ciones y con accesorios recomendados por el fabricante.
4) NO USE con el cable o clavija dañados. Si la
unidad ha sido golpeada, mojada, o dañada enalgun
modo llame al centro de servicio o Powr-Flite®.
5) NO JALE o carque del cable, no machuque el cable
o lo estire sobre objetos filosos. NO USE la unidad
sobre el cable.
6) NO DESENCHUFE jalando el cable. Para hacerlo
jale de la clavija no del cable.
7) NO TOME la clavija o el aparato con las manos
mojadas.
8) NO T APE objetos en las ventilas. NO USE si alguna
está tapada. Mantenga limpia de polvo, peluza o
cualquier obstrucción
9) Mantenga el pelo, ropa suelta manos y partes del
cuerpo lejos de las aberturas y partes móviles.
10) NUNCA aspire objetos que mandose o humeando
como cigarros, cerillos o cenizas calientes.
11) NO USE sin bolsa para polvo o filtro para operacion en
seco o adaptor para liquids para operacion humeda.
12) Apajue todos los controles antes de desconectar.
13) Use extremo cuidado al limpiar en tapas.
14) NO UTILIZE la unidad para levantar liquidos flam-
ables o combustibles como gasolina; o use en areas
dande se encuentren estos liquidos.
15) Replacen los partes gastadas o dañadas immediamente para mentener la seguridad.
16) Esta unidad debe ser conectada a un enchufe correctamente aterrezado solamente. Vea los instrcciones de tierra. Sí su aspiradora/soplador tiene un
enchufe para una boquilla de potencia, apaguela
siempre antes de conector o desconector la goquilla.
17) NO USE donde oxigeno o anestesicos sean empleados.
18) NO USE extensión electrica mas que cuando sea
absolutamente necesario. Si usa extensión, el cable
debe de ser calibre #14 o mayor y no debe exceder
50 pies de longitud. El cable extensión debe ser de
3 polos para asegurar protection de tierra.
PARA UNIDADES EN SECO
Una sacudida electrica puede
suceder sí se usa en superfi-
cies humedas.
NO SE exponga a la lluvia a
guarde bajo techo.
PARA UNIDADES
DE USO HUMEDA
Para evitar c hoque electrico NO
exponga a la lluvia. Guarde bajo
techo. Puede recibir una descar-
ga electrica sí la boquilla de
potencia es usada en superficies
humedos
¡PELIGRO!
Una coneccion incorrecta de tierra puede resultar en una descarga electrica. Consulte con
un electricista calificado o persona de servicio si tiene duda acerca del enchufe y su tierra.
No modifique el enchufe de las unidad. Si no encaja en el enchufe, haga instalar un enchufe
apropiado por un electricista calificado.
Page 6
COVER ASSEMBLIES
ref # order # description and model numbers
3 C9M blue cover assembly, complete with float cage,
models PF10, PF26, PF39, PF40
5 C12M top dome assembly with blower port
a and handle, fits all models
5 C16M blue cover only, models PF20, PF27
3 C30M chrome cover assembly, complete
with float cage, models PF25
5 C42M blue cover only, models PF10, PF26,
PF39, PF40
6 C79M blower screen (to direct air), all models
5 C83M chrome cover only, models PF25
3 C97M chrome cover assembly, complete
with float cage,models PF35
COMPONENT PARTS
ref # order # description and model numbers
10 1969 lamb motor, 220V
10 1987 lamb motor, 110V
–– C1M power head plug, black 13" 18/3
11 C5M wheels
12 C10M filter ring for 10 gallon filter
12 C11M filter ring for 20 gallon filter
13 C17M receptacle, power nozzle
–– C20M vinyl coated wire hose cage, 10 gallon units
14 C21M plastic drain valve
15 C22M drain valve flange
16 C23M caster
17 C25M clamp assembly
–– C26M vinyl coated wire hose cage, 20 gallon units
18 C27M motor adapter
19 C28M top motor gasket
20 C29M motor gasket
21 C31M float cage assembly
22 C32M inlet fitting
23 C34M dolly body, 20 gallon units
24 C35M tool caddy, 20 gallon units
25 C36M 2 position push handle for 20 gallon unit
26 C37M toggle switch
27 C38M line cord
23 C43M dolly body, 10 gallon units
–– C51M gasket for AA140, AA141
29 C54M top seal gasket
28 C70M float ball only
30 C75M pin and ring assembly for 2 position handle
31 C86M panel nut for C5M
32 C87M hub cap for C5M
33 C89M retainer clip for C17M
–– C90M strain relief
24 C92M tool caddy, 10 gallon units
34 C94M gasket for float ball
25 C98M 2 position push handle, 10 gallon units
CAN ASSEMBLIES
ref # order # description and model numbers
7 C39M can assembly, complete with hardware and
wheels, models PF20, PF27, PF27HM
7 C40M can assembly, complete w/ wheels, dolly and
handle, fits PF10, PF26, PF39, PF39HM, PF40
8 C41M can assembly, with hardware and handle, no
dolly or wheels, models PF10, PF26, PF39,
PF39HM, PF40
7 C91M 20 gauge stainless can assembly, complete with
hardware and wheels, models PF25, PF25HM
9 C95M 20 gauge stainless can assembly, no hardware,
models PF25, PF25HM
7 C99M 20 gauge stainless can assembly, complete with
hardware and wheels, models PF35, PF35HM
Page 7
TK4 Fits Powr-Flite® PF40
TK2 Fits Powr-Flite® PF25, PF27, Pf35, and PF39
WANDS
ref # order # description and model numbers
–– CT9 6 foot straight extension wand,
steel with swivel end
A3 CT14 1-1/2"x54" 2 piece chromed wand set
–– CT24 1-1/2"x54" 2 piece aluminum wand set
–– C24M lock ring for above wands
–– C93M screw on coupling for above wands, except CT7
B3 L1207 1-1/4" slotted wand, straight
B4 L1221 1-1/4" curved attachment end with swivel
and suction control
HEAD ASSEMBLIES
ref # order # description and model numbers
2 C8M head assembly complete with blue cover and
blower port, models PF10, PF26, PF39, PF40
1 C81M head assembly complete PF35SR
1 C82M head assembly complete PF25SR
2 C15M head assembly, complete with blue cover and
blower port, models PF20, PF27
1 C84M head assembly, complete with chrome cover and
blower port, models PF25
1 C96M head assembly, complete with chrome cover and
blower port, models PF35
–– HM7 head assembly, model PF35HM
TOOLS
ref # order # description and model numbers
B1 AA140 1-1/4” machine end hose coupling
A1 AA141 1-1/2” machine end hose coupling
A2 AA150B 1-1/2” x 10’ hose complete, blue
B2 AA153 1-1/4” x 7’ hose complete, grey
–– AA170 50’roll, 1-1/4” x 7/8” gasket
–– CT10 1-1/2" concrete tool, 12" wide mouth picks up
debris quick and easy; use with CT9, CT14
–– CT11 1-1/2" tapered dusting brush, cast aluminum,
3" wide
–– CT11R dust brush refill for CT11
–– CT12 1-1/2" overhead pipe tool, 4" to 6" diameter, use
with CT6, CT7, CT15, or CT24 wands
–– CT13 1-1/2" crevice tool, 15" long,
polished chrome finish
A4 CT30 floor tool, complete, 14"
A5 CT31 squeegee tool, complete, 14”
–– CT32 replacement floor brush for CT30
–– CT33 replacement squeegee blade for CT31
A6 CT34 rug tool, complete, 14"
–– CT35 replacement rug shoe for CT34
–– CT39 replacement brass bristle
–– CT41 1-1/4" squeegee tool
–– CT45 1-1/2" metal upholstery tool
–– CT51 double blade squeegee tool, complete, 14"
–– CT52 claw tool less brush strip, for vacuuming of
asbestos (comes with hazardous duty vacs)
–– CT53 1-1/2" x 11" crevice tool (comes with
hazardous duty vacs)
–– CT54 replacement squeegee blades for CT51
B5 D407B rug tool complete, 1-1/4"
B6 D408B floor tool complete, 1-1/4"
–– D409B upholstery tool, 1-1/4"
B7 D410B dusting brush, 1-1/4"
B8 D411B crevice tool, 1-1/4"
B9 E529 2-way, deluxe rug tool, 1-1/4"
35 G752 10 gallon replacement cloth filter with gasket
35 G753 20 gallon replacement cloth filter with gasket
35 H818 10 gallon cloth filter with gasket
35 H819 20 gallon cloth filter with gasket
–– HM1 2-ply, 5-pak, totally enclosed paper bag for
10 gallon units
–– HM2 2-ply, 5-pak, totally enclosed paper bag for
20 gallon units
–– HM3 intermediary glass filter, 2-pak, for 10 gallon units
–– HM4 intermediary glass filter, 2-pak, for 20 gallon units
–– HM5 14" HEPA filter
–– HM6 16" HEPA filter
–– 399PB paper bag with elastic top, 5-pak
–– HMK1 conversion kit for wet pick up recovery,
20 gallon units
–– HMK2 conversion kit for wet pick up recovery,
10 gallon units
A2
A3
A6
A5
A4
A1
B1
B2
B4
B9
B8
B7
B3
B3
B6
B5
Page 8
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
FOR DRY (ONLY) OPERATION OF VACUUM
FOR WET/DR Y OPERA TION OF VACUUM
Filter Installation
1) Disengage the three (3) retaining clamps that hold the
motor head to the tank. Carefully remove the motor head
and set aside.
2) Lift the cloth filter from the rim of the tank and remove
any hoses, tools, etc. stored in the tank.
3) Install disposable paper filter bag as illustrated on page
10, (optional) set cloth filter bag on tank, replace motor
head and snap down hold-down clamps.
CAUTION: Care should be exercised when handling motor
head. Dropping motor head may cause permanent damage
to internal components.
NOTE: DO NOT WASH CLOTH FILTER. Shrinkage to the
cloth and damage to the gasket can occur.
Wet/dry vacuum cleaners are equipped with a by-pass
motor, designed for wet or dry pick-up.
Wet Pick-Up Adaption
When ordered as a wet/dry vac, this unit is shipped with a dry
filter for dry pick-up and a float cage assembly attached to
motor head for liquid recovery. The safety float located in the
protective frame of the float cage stops vacuum action of
motor head when maximum recovery of liquid is reached.
1) Disengage the three (3) retaining clamps that hold the
motor head to the tank. Carefully remove the motor head
and set aside.
2) Lift the cloth filter from the rim of the tank and remove
any hoses, tools, etc. stored in the tank.
3) Remove cloth filter from tank, replace motor head & cage
and snap down hold-down clamps.
CAUTION: EXCESSIVE FOAM MUST BE REDUCED WITH
A CHEMICAL DEFOAMER sprayed or poured into the tank.
Powr-Defoamer part # K2 is recommended.
NOTE: ln order to maintain maximum efficiency of this
vacuum cleaner it is important to clean the cloth filter
each time tank is emptied. To clean the cloth filter, shake
off loose particles and brush exposed surface with a soft
bristle brush.
Wet Pick-Up Maintenance
DO NOT store this unit with any liquid inside the vacuum
tank. Before storing or converting over to dry pick-up, run
emptied vacuum for approximately five minutes to eliminate moisture in the tank, hose, and attachments.
NOTE: CAUTION should be exercised when handling
motor head. Dropping the motor head may cause permanent damage to internal components.
Motor head
Float cage
Cloth filter
Retaining
clamp
Tank
Page 9
SAVE THESE INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
VACUUM ASSEMBLY
TOOLS & ATTACHMENT INSTALLATION & ASSEMBLY
HOSE CADDY
1 ) Standard equipment on
20 gallon units.
2) Shipped assembled.
3) Mounted to motor head with
three tank mounted clamps.
HOSE AND SWIVEL CONNECTOR
The hose and swivel connector are
pre assembled at the factory. To
attach swivel connector to intake fitting on vacuum tank:
1) Line up the slots in swivel
connector with retaining rivets
on intake.
2) Insert swivel connector and twist
clock wise until rivets reset against
slot end.
TO ASSEMBLE WAND
The two piece wand requires assembly.
1 ) Align the button lock of the upper
wand section with the opening for
button lock in the lower wand
section.
2) Push sections together until lock is
accomplished.
To attach hose to wand, slide free end
of hose onto the grooved end of
upper wand.
TO ASSEMBLE TOOLS
1 ) Turn wand nut counterclockwise
approximately four complete turns.
2) Insert the tool into wand and
coupling.
3) While holding tool in place, turn
nut clockwise until wand nut is
fully locked.
TOOL CADDY
1 ) Attaches to top of handle facing tank.
2) Snap closures over top handle and
Closures on each side of handle.
HANDLE
On 20 gallon units, this vacuum is shipped with the handle in storage
position and must be moved to operating position. On 10 gallon units,
the handle is shipped off and must be attached.
1) Firmly grasp speed pin on each side of handle and pull up and out.
2) Pulling handle slowly away from tank, align front handle holes with
holes in handle bracket.
3) Insert speed pins through holes on both sides, locking handle in
position. Attach tool caddy.
Page 10
To install paper and cloth filters
1) Expand filter bag pleats,
then grasp scored ends of
cardboard and pull forward
completely onto inlet tube as
close to tank wall as possible.
2) Position cloth filter assembly
on the tank, then place
motor head on tank and
close clamps.
To remove loaded filter bag
1) Remove motor head and
cloth filter assembly and lay
cleaner on its side with inlet
tube on top.
2) Pull bag out of tank using
care not to puncture bag
with inlet tube.
3) Re-seal cardboard flap that
covered filter bag opening.
4) Install fresh new bag.
SAVE THESE INSTRUCTIONS
REMOVAL OF LIQUIDS
PAPER AND CLOTH FILTERS
REMOVAL OF LIQUID FROM VACUUM TANK
FILTER INSTALLATION AND REMOVAL
Tanks without drain valves
1) Disengage hold-down
clamps on tank.
2) Remove motor head and
wet pick-up adapter, carefully place to one side.
3) Pour liquid from tank into
suitable drain.
Tanks with drain valves
1) Center the drain valve over
drain in floor.
2) To open the drain, turn
valve counterclockwise
and continue turning until
desired flow is reached.
3) To close, make sure there
are no obstructions that will
prevent valve from sealing,
then turn valve clockwise
until it is fully closed and
sealed
Page 11
CONSERVER CES INSTRUCTIONS
IMPORTANTES MESURES DE SÉCURITÉ
AVERTISSMENT!: Pour reduire les risques d’incendie,de choc
electrique ou de blessure:
POUR SÉCURITÉ
INSTRUCTIONS VISANT LA MISE À LA TERRE
1) NE PAS laisser l’appareil sans surveillance lorsqu’il
est branché. Débrancher lorsque l’appareil n’est pas
utilisse ét avant l’entretien.
2) NE PAS permettre aux enfants de jouer avec
l’appareil. Une attention particulière est nécessaire
lorsque l’appareil est utilisé par des enfants ou à
proximité de ces derniers.
3) N’utiliser que conformément à cette notice avec les
accessoires recommandés par le fabricant.
4) NE PAS utiliser si le cordon ou la fiche est endom-
magé. Retourner l’appareil à un atelier de réparation
s’il ne fonctionne pas bien, s’il est tombé ou s’il a été
endommagé, oublié à l’extérieur ou immergé.
5) NE PAS tirer, soulever ou traîner l’appareil par le
cordon. NE PAS utiliser le cordon comme une
poignée, le coincer dans l’embrasure d’une porte ou
l’appuyer contre des arêtes vives ou des coins.
NE PAS faire rouler l’appareil sur le cordon. Garder
le cordon à l’écarte des surfaces chaudes.
6) NE PAS débrancher en tirant sur le cordon. Tirer
plutôt la fiche.
7) NE PAS toucher la fiche ou l’appareil lorsque vos
mains sont humides.
8) N’INSÉRER aucen objet dans les ouvertures.
NE PAS utiliser l’appareil lorsqu’une ouverture est
bloquée. S’assurer que de la poussière, de la
peluche, des cheveux ou d’autres matières ne
réduisent pas le débit d’air.
9) Maintenir les cheveux, les vêtements amples, le
doigts et toutes les parties du corps à l’écart des
ouvertures et des pièces mobiles.
10) NE PAS aspirer de matières en combusion ou qui
dégagent de la fumée, comme des cigarettes, des
allumettes ou des cendres chaudes.
11) NE PAS utiliser l’appareil si le sac à poussiére ou le
filtre n’est pas en place.
12) Mettre toutes les commandes à la position ARRÊT
avant dé debrancher l’appareil.
13) User de prudence lors du nettoyage des escaliers.
14) NE PAS aspirer des liquides inflammables ou com-
bustibles, comme de l’essence, et ne pas faire
fonctionner dans des endroits où peuvent se trouver
de tels liquides.
15) Replacez taré parties vite à maintenir sécurité.
16) Ne brancher qu’à une prise de courant avec mise à
la terre. Voir les instructions visant la mise à la terre.
POUR APPAREIL SEC
Pour réduire les risques de
choc électrique, ne pas aspire
de maitiéres humides. Ne pas
exposer à l’intérieur.
POUR APPAREIL HUMIDE
Pour réduire les risques de c hoc
électrique, ne pas
exposer à la pluie et garder
l’aspirateur à l’intérieur .
AVERTISSMENT!
Un conducteur de terre mal raccordé peut entraîner un risque de choc électrique. Consulter un électricien ou un technicien d’entretien qualifié si vous n’êtes pas certain que la prise soit correctement
mise à lat terre. Ne pas modifier la fiche fournie avec l’appareil-se elle ne peur être inséreé dans la
prise, faire installer une prise adéquate par un electricien qualifié.
Page 12
SAVE THESE INSTRUCTIONS
MAINTENANCE GUIDE
WARRANTY
The manufacturer warrants to the original purchaser that products manufactured are free from
defects of workmanship and material, provided such goods are installed, operated and maintained
in accordance with written manuals or other instructions for a period of 1 year from date of purchase. In case you, as our customer, meet any trouble with your machine, contact your Powr-Flite®
representative, who will be happy to be of service to you and will take care of the warranty settlement.
NOTE: Alterations and changes made to the machine without written approval of the
manufacturer and use of unapproved spare parts will not be covered by warranty.
Loss of Suction
CAUSE: SOLUTION:
1) Full paper filter bag. 1) Replace paper filter bag.
2) Dry filter assembly clogged. 2) Clean cloth filter.
3) Clogged hose or wand. 3) Remove obstruction.
4) Tank rim is dented. 4) Replace tank.
5) Loose or broken fan. 5) Contact manufacturer of service center.
6) Motor not working. 6) Contact manufacturer or service center.
7) Float not functioning. 7) Check to see if ball on rod moves freely or
tank is full.
8) Gasket worn. 8) Replace gasket.
Motor is not running
CAUSE: SOLUTION:
1)Broken switch. 1) Contact manufacturer or service center.
2) Defective power cord. 2) Contact manufacturer or service center.
3) Defective motor. 3) Contact manufacturer or service center.
4) Blown fuse or tripped circuit breaker
at power source 4) Contact manufacturer or service center.
Dust blowing from unit when running
CAUSE: SOLUTION:
1) Full paper filter bag. 1) Replace filter bag.
2) Paper filter bag not installed properly or
off inlet tube. 2) Re-install or replace paper filter bag properly.
3) Cloth filter bag dirty. 3) Clean cloth filter bag.
4) Cloth or paper filter bag is torn. 4) Replace filter bag.
5) Paper bag is not installed. 5) Install paper filter bag.
Water blowing from unit when running
CAUSE: SOLUTION:
1) Tank is full of liquid. 1) Empty tank.
2) Sudsy or foamy liquid is being picked up. 2) Add defoamer to tank.
Loading...