Powerwow R1205C3 Series, R1205C3DG, R1205C3ST, R1205C3I7, R1205C3S8 User Manual
...
1
USER MAUNNAL
WIRELESS POWER RECEIVER
Model number: R1205C3DG, R1205C3ST, R1205C3I7, R1205C3S8, R1205C3CM
R1205C3XX (“XX” could be “CM”, “ST” or “DG”)
PHONE
Z-axisdistance
PHONECASE
PTU(Transmi er)
PRU(R1205-C3ST)
2
T1205C3XX User Manual / T1205C3XX 使用說明書
Key Feature
主要功能
Support mobile phones with Micro-B、Lightning
or Type-C connectors
When operating with AirFuel (A4WP) compatible
transmitter, it can Drop & go convenience, no
need to concern about alignment
可支援 Micro-B、Lightning 跟 Type-C 手機
當接收來自 AirFuel (A4WP)傳送端的電力，放置
充電區域即可進行無線充電
Product Specification
產品規格
1. Model_: R1205C3XX
2. Output: 5W (5V/1A)
3. Over Voltage Protection to protect itself from
damage caused by unexpected induced rectifier
voltage
4. Over Temperature Protection to protect from
overheating
5. Current Limit to limit current at pre-configured
level
6. Dynamic current adjustment by referring to
temperature value
7. Dimension: 80 x 64 x 1.4mm
8. Weight: 15g
1. 型號: R1205C3XX
2. 輸出: 5W (5V/1A)
3. 過電壓保護，確保接收器不會因傳送端導致的高
感應電壓造成損壞
4. 過溫度保護，確保接收器不會因為溫度累積過
熱，造成損壞
5. 溫度限流設定，確保不會因被充電裝置不正常抓
取超高的電流
6. 隨著溫度高低，自動調整電流，避免過熱
7. 尺寸: 80 x 64 x 1.4 毫米
8. 重量: 15g
Before installation
安裝前注意事項
Make sure the connector of RECEIVER match the
connector of mobile phone you’d like to charge
確認接收器的 connector 與手機接孔相符
Installation Procedure
安裝步驟
Plug the male connector of RECEIVER into the mobile
phone connector and put them in the charging area
將接收器街頭插入於手機充電接孔並置於充電區域
Product Safety Reminder
產品安全提示
1. Slightly heat up during charging is normal
2. Please do not soaking in water, drop, bump, or
disassemble the product permission for
maintenance.
3. Please use PowerWoW PTU transmitter to ensure
1. 充電中本產品有輕微發熱為正常現象
2. 禁止浸水,摔落,撞擊或私自拆解本產品
3. 禁止使用其他非原廠電源線
4. 建議搭配使用 PowerWoW PTU 傳送器,以保證效
能
Loading...