PowerWalker VFI 20000 CPR 3-3 User Manual
Online UPS
BlueWalker GmbH | Hellersbergstrasse 6, 41460 Neuss, Germany | Tel.: +49 2131 206 17 59
MODEL
VFI 10000 CPR 3/1
VFI 10000 CPR 3/3
VFI 15000 CPR 3/1
VFI 15000 CPR 3/3
VFI 20000 CPR 3/1
VFI 20000 CPR 3/1
Item Number
10122050
10122053
10122051
10122054
10122052
10122055
Power
10000VA / 9000W
15000VA / 13500W
20000VA / 18000W
Height
3U
6U
INPUT
Input Voltage Range
305-478 VAC (3-phase) @100% load & 190-520 VAC (3-phase) @50% load
Input PF
≥ 0.99 at full load
Max THDi
≤6%
Frequency Range
46Hz - 54Hz or 56Hz - 64Hz
OUTPUT
Nominal Output Voltage
208/220/230/240 V
360/380/400/415 V
208/220/230/240 V
360/380/400/415 V
208/220/230/240 V
360/380/400/415 V
Voltage Regulation
±1%
THDv
≤2% Full Linear Load; ≤5% Non-Linear Load
Frequency
(Synchronized Range)
46Hz - 54Hz or 56Hz - 64Hz
Frequency
(Battery Mode)
±0,1Hz
Efficiency in Line Mode
90.5%
90.5%
91.0%
91.0%
91.0%
91.0%
Efficiency in Battery Mode
87.0%
86.0%
88.0%
87.0%
88.0%
87.0%
Overload Capacity
Line Mode: 10min @100%-110%; 1min @110%-130%; 1s @>130%;
Battery mode: 30s @100%-110%; 10s @110%-130%; 1s @>130%
BATTERIES
Batteries
Amount of battery packs is adjustable for the requested backup time
Standard Battery Set
1 BP with 20 x 9Ah/12V
2 BP with 20 x 9Ah/12V
Charger
1A / 2A / 4A; default setup 1A
1A / 2A / 4A; default setup 2A
Battery Connection
50A rated
100A rated
2016 PREMIERE
The PowerWalker VFI CPR series offers a professional IT
rack solution for modern data centres with a high
power factor of 0.9. The total capacity can be extended
to 60kVA by connecting up to three units in parallel.
The series is available with either single or three-phase
output. Furthermore the easy plug and play design
allows an increased backup time by connecting more
battery packs. In ECO mode the UPS reaches an
efficiency of up to 96%.
TECHNICAL SPECIFICATION
Generator-compatible
The wide input voltage and frequency ranges allow operation in unstable networks and provide generator
support. Multiple accessories, including battery packs and communication cards, enhance the functionality of
the UPS and allow a greater backup time. The system can be monitored locally via an LCD panel or remotely via
the PowerWalker ViewPower software.
PowerWalker VFI 10000-20000 CPR Series
Professional IT solution with three phase input
Available with single and three phase output
3-stage charging design for optimized battery performance
Parallel operation with range up to 60kVA (3x20kVA)
Extendable battery packs available
Online UPS
BlueWalker GmbH | Hellersbergstrasse 6, 41460 Neuss, Germany | Tel.: +49 2131 206 17 59
VFI 10000 CPR 3/1 front
VFI 10000 CPR 3/1 back
VFI 15000-20000 CPR 3/1 front
VFI 15000-20000 CPR 3/1 back
VFI 10000-20000 CPR 3/3 front
VFI 10000-20000 CPR 3/3 back
Name
Picture
Name
Picture
SNMP Manager
Network Management
Item Number: 10120505
EAN: 4260074974034
EMD for SNMP Manager
Environment Module
Item Number: 10120544
EAN: 4260074974966
AS400 Card
Dry Contacts
Item Number: 10120515
EAN: 4260074974300
Modbus Card 2
Modbus Protocol
Item Number: 10120565
EAN: 4260074975703
SNMP Box
Network Management
Item Number: 10131000
EAN: 4260074977424
BP A240R-20x9Ah
Battery Pack with 20 pcs
Item Number: 10120532
EAN: 4260074974614
ACCESSORIES
PHOTOS
All products specifications are subject to change without notice. 11/08/2016
Loading...