PowerWalker VFI 10K CPG PF1 3-3 BI Product Information

Download

Page 1

Online

VFI 10K-80K CPG 3/3 PF1

• Professional UPS solution for commercial applications

• Power Factor 1.0 (10kW = 10kVA)

• Dual Input

• Included SNMP Manager (each unit comes with

the SNMP communication embedded)

• High-end touch panel

• Modifications available on demand (i.e. isolation

transformer, negative energy abosrber)

• Adjustable battery number and configurable charger current

• Parallel operation up to 3 units

• Built-in backfeed protection

2019 PREMIERE

The PowerWalker VFI CPG 3/3 PF1 series is a professional commercial solution built in double conversion technology with power factor 1.0. Equipped with three-level inverter topology, it results in high efficiency reaching 95.5% in Line Mode and even

98.5% in ECO Mode. The series ensures low harmonic distortions and precise voltage regulation (1%). All phases have Active Power Factor Correction.

Thanks to its modern design, the VFI CPG series reaches a very high power density (kVA output in relation to the size/volume of the unit). All models of this series offer generator support, dual input and allow parallel operation up to three units. Each unit is equipped by default with SNMP Card to increase control over the unit and offer embedded monitoring over IP.

For this model battery numbers can be adjusted (between 32 and 40pcs, except 10K unit), allowing more flexibility and compatibility with existing battery banks. The three stage extendable charging design also enhances battery performance over its life time.

For safety reasons this series has been equipped with backfeed protection (reverse feed) in order to avoid power transfer to the input terminal in case of mains failure. On demand we can modify unit to include isolation transformer or negative power absorber.

Page 2

Online

VFI 160-200K CPG

VFI 100-120K CPG

VFI 60-80K CPG

VFI 10-40K CPG

Battery Pack

Page 3

Online

TECHNICAL SPECIFICATION

MODEL

Input Voltage Range 305-478 VAC (3-phase) @100% load & 190-520 VAC (3-phase) @50% load

Input PF ≥ 0.99 at full load

Max THDi ≤4% Full Linear Load; ≤6% Half Load

Frequency Range 46Hz - 54Hz or 56Hz - 64Hz

Nominal Output Voltage 3x 400V (3Ph+N); (208)/220/230/240VAC(Ph-N)

Voltage Regulation ±1%

THDv ≤2% Full Linear Load; ≤4% Non-Linear Load

Frequency (Synchronized Range) Frequency (Battery Mode)

Load Crest Ratio Max 3:1

Efficiency in Line Mode 94.0%

Efficiency in ECO Mode 98.0%

Efficiency in Battery Mode

Line Mode: 10min @100%-110%; 1min @110%-130%; 1s @>130%;

Overload Capacity

Software PowerWalker ViewPower

Ports USB, RS-232, EPO

Connection Terminal connection

Parallel Operation Up to 3 units of the same size and type

Battery mode: 30s @100%-110%; 10s @110%-130%; 1s @>130%

Communication

VFI CPG 3/3 PF1 Serie

INPUT

OUTPUT

46Hz - 54Hz or 56Hz - 64Hz

±0,1Hz

93.5%

Item

10122152 VFI 10K CPG PF1 3/3 BI 10kW

10122153 VFI 15K CPG PF1 3/3 BI 15kW

10122154 VFI 20K CPG PF1 3/3 BI 20kW

10122155 VFI 30K CPG PF1 3/3 BI 30kW

10122156 VFI 40K CPG PF1 3/3 BI 40kW

10122157 VFI 10K CPG PF1 3/3 BX 10kW

10122158 VFI 15K CPG PF1 3/3 BX 15kW

10122159 VFI 20K CPG PF1 3/3 BX 20kW

10122160 VFI 30K CPG PF1 3/3 BX 30kW

10122161 VFI 40K CPG PF1 3/3 BX 40kW

10122162 VFI 60K CPG PF1 3/3 BX 60kW

10122163 VFI 80K CPG PF1 3/3 BX 80kW

Model

Power

Batteries

20x 12V/9Ah

32x 12V/9Ah

2x32x 12V/7Ah 9h to 90%

2x32x 12V/9Ah 9h to 90%

Suitable for external batteries

Recharge Time

9h to 90%

1-12A

1-24A

Charger

Width Height Depth Weight

250 827 627 139

300 1000 815 152

250 827 627

300 1000 815

300 1010 790 108

300 1010 790 113

Name Picture Name Picture Name Picture

SNMP Manager

Network Management Item Number: 10120505 EAN: 4260074974034

EMD for SNMP Manager

Environment Module Item Number: 10120544 EAN: 4260074974966

SNMP Box

Network Management Item Number: 10131000 EAN: 4260074977424

INCLUDED!

AS400 Card

Dry Contacts Item Number: 10120515 EAN: 4260074974300

Modbus Card 2

Modbus Protocol Item Number: 10120565 EAN: 4260074975703