Power Traveller DISCOVERY User guide

PARAMETERS

• Input: 5V

• Micro USB IN

• Charging time: 6 hours

• USB Output 1&2:
combined 3A

• Weight: 157g

• Dimensions: (L*H*W)
135 x 64 x 15mm

• Battery capacity: 6000mAh

• Power: 22Wh

• Battery chemistry:
Lithium Polymer

• Battery cycle times:
>500 cycles

• 4 LED battery level
indicator. Each blue light
represents 25% of charge

LED
STATUS
LIGHTS

ON/OFF

BUTTON

USB PORTS 1&2

COMBINED 3A

MICRO
USB IN

DISCOVERY

SLEEK COMPACT
STYLISH CHARGER

USER GUIDE

YOU CAN: CHARGE TABLETS SMARTPHONES

GOPROS GPS SMART WATCHES HEAD LAMPS
AND MORE

Tips are available to buy at:
powertraveller.com

MICRO USB

TO USB

CONNECTION

CABLE

TURN ON/OFF CHECK CHARGE CHARGE A DEVICE RECHARGING DISCOVERY

When connecting a device, the
discovery will automatically turn on.
The blue LEDs will light up. Each
illuminated light represents 25% of
power. When disconnecting a device,
the
discovery will automatically turn o.

For the auto-on feature, press and
hold the on/o button for 3 seconds.

Always turn the discovery o when
not in use to conserve power. To turn
the auto-on feature o, hold the on/
o button for 3 seconds.

While the discovery is turned o,
click the on/o button briey. The
blue LEDs will illuminate and the
number of lights will indicate the
amount of charge remaining.

If the far left ashes blue, the
discovery requires charging.

Attach any USB cable to either of the
USB output sockets. Then connect the
cable to the device that you wish
to charge. Once your device is fully
charged, the discovery will
automatically turn o.

Connect the included cable to a
5V USB output socket (e.g. a
laptop or wall plug with USB
socket) and connect the micro
USB end into the micro USB
socket on the discovery. A full
charge will take approx. 6 hours
depending on the output of the
USB port.

When fully charged, all 4 LEDs
will be solid blue.