POWERTIP CPC1604LRU-AWB-H Technical data

CORPORATION

：

SPECIFICATIONS

CUSTOMER

SAMPLE CODE (VER.0)

MASS PRODUCTION CODE

(This Code will be changed while mass production)

PC1604LRU-AWB-H

Customer Approved

Date:

Sales Sign QC Confirmed Checked By Designer

■ Approval For Specifications Only.

* This specification is subject to change without notice. Please contact Powertip or it ’s representative before designing your product based on this specification.

□ Approval For Specifications and Sample.

Headquarters:

No.8, 6th Road, Taichung Industrial Park, Taichung, Taiwan 台中市 407 工業區六路 8號

Powertip Corporation

□ LCD Division:

TEL: 886-4-2355-6888 FAX: 886-4-2355-6898 E-mail: sales@powertip.com.tw

▓ LCM Division:

TEL: 886-4-2355-8168 FAX: 886-4-2355-8166 E-mail: sales@powertip.com.tw

Http://www.powertip.com.tw

NO.PT -A-005-3

RECORDS OF REVISION

Date Rev. Description Note Page

2003/09/20 0 Revised Contents

PC1604LRU-AWB-H Rev.0(DK) Page2

Total ：20 Page

Contents

1. SPECIFICATIONS

1.1 Features

1.2 Mechanical Specifications

1.3 Absolute Maximum Ratings

1.4 DC Electrical Characteristics

1.5 Optical Characteristics

1.6 Backlight Characteristics

2. MODULE STRUCTURE

2.1 Counter Drawing

2.2 Interface Pin Description

2.3 Timing Characteristics

2.4 Display Command

2.5 Character Pattern

3. QUALITY ASSURANCE SYSTEM

3.1 Quality Assurance Flow Chart

3.2 Inspection Specification

4. RELIABILITY TEST

4.1 Reliability Test Condition

5. PRECAUTION RELATING PRODUCT HANDLING

5.1 Safety

5.2 Handling

5.3 Storage

5.4 Terms of Warranty

Note：For detailed information please refer to IC data sheet：ST7066U,AX6112

PC1604LRU-AWB-H Rev.0(DK) Page3

1. SPECIFICATIONS

1.1 Features

Item Standard Value

Display Type 16*4 Characters

LCD Type STN YG Positive Transflective Extended Temp.

Driver Condition LCD Module：1/16 Duty，1/4 Bias

Viewing Direction 6 O’clock

Backlight YG LED B/L

Weight

Interface

Other

1.2 Mechanical Specifications

Item Standard Value Unit

Outline Dimension

87.0 (L) * 60.0 (w) * 14.0 (H)(Max)

Viewing Area

Active Area

Dot Size

Dot Pitch

Note：For detailed information please refer to LCM drawing

1.3 Absolute Maximum Ratings

Item Symbol Condition Min. Max. Unit

59 g

－－

62.0 (L) * 25.6 (w)

56.2 (L) * 20.8 (w)

0.55 (L) * 0.55 (w)

0.60 (L) * 0.60 (w)

mm mm mm mm mm

Power Supply Voltage VDD

LCD Driver Supply Voltage V

LCD

Input Voltage VIN

Operating Temperature TOP Excluded B/L

Storage Temperature TST Excluded B/L

Storage Humidity HD Ta＜40 ℃

PC1604LRU-AWB-H Rev.0(DK) Page4

－－－

-0.3 7.0

V

VDD-10.0 VDD+0.3 V

-0.3 VDD+0.3

-20 70

-30 80

- 90

V

℃ ℃

%RH

1.4 DC Electrical Characteristics

Item Symbol Condition Min. Typ. Max. Unit

V

= 5.0 V ± 10%，VSS = 0V，Ta = 25℃

DD

Logic Supply Voltage VDD

“H” Input Voltage VIH

“L” Input Voltage VIL

“H” Output Voltage VOH IOH=-0.1mA

“L” Output Voltage VOL IOL =0.1mA

Supply Current IDD VDD = 5.0 V

LCM Driver Voltage VOP

Note: *1. THE VOP TEST POINT IS VDD - V

1.5 Optical Characteristics

LCD Panel：1/16 Duty，1/5 Bias，V

Item Symbol Conditions Min. Typ. Max. Reference

25℃*1

.

O

－－－

-20℃

70℃

4.5 5.0 5.5

0.7 VDD - VDD

-0.3 - 0.6

3.9 - VDD

- - 0.4

- 2.0 -

- - -

- 6.9 -

- - -

=6.9 V，Ta = 25℃

LCD

V V V V V

mA

V

View Angle è C>2.0, ∅ = 0° 40° - - Notes 1 & 2

Contrast Ratio C è = 5°, ∅ = 0° 5 7 - Note 3

Response Time(rise) tr è = 5°, ∅ = 0° - 150ms - Note 4

Response Time(fall) tf è = 5°, ∅ = 0° - 330 ms - Note 4

PC1604LRU-AWB-H Rev.0(DK) Page5

θ

Note 1: Definition of angles θ and ∅ Note 2: Definition of viewing angles θ1 and θ2

Light (when reflecte d) z (θ=0°)

Sensor

Cmax.

Y’(∅=180°)

Contrast

LCD panel

X’

Z’

θ1 θ2

Light (when transmitted )

∅

Y(∅=0°)

X(∅=90°)

C

2.0

viewing angle θ (∅ fixed) Note : Optimum viewing angle with the

(θ=90°)

naked eye and viewing angle θ at Cmax. Above are not always the same

Note 3: Definition of contrast C Note 4: Definition of response time

Brightness (reflection) of unselected dot (B2)

C = 

Brightness (reflection) of selected dot (B1)

VLCD

Brightness (reflection) of selected dot

(%)

0

-VLCD

Brightness (reflection) of unselected dot

Brightness (reflection)

B2

B1

Non-selected state

Contrast

Selected state Non-selected state

90%

tr

tf

0 Note: Measured with a transmissive LCD

operating voltage (v) panel which is displayed 1 cm2

V

tr : Response time (rise) tf : Response time (fall)

: Operating voltagef

LCD

: Frame frequency

FRM

10%

Time

PC1604LRU-AWB-H Rev.0(DK) Page6